Sony DSLR-A560 / DSLR-A560L / DSLR-A560Y / DSLR-A580 / DSLR-A580J / DSLR-A580L / DSLR-A580Y Service Manual ▷ View online
DSLR-A560/A560L/A560Y/A580/A580L/A580Y/A580J_L2
3-2
#64: M1.7 X 5.0 (Tapping)
(Silver)
2-666-551-21
5.0
1.7
1-13. Iris Joint Gear, Aperture Unit
∗ The Aperture Unit is supplied by being set in the charge position
(initial position), but if this position is disordered when the Aperture
Unit is removed, or if the charge position is to be set again, perform
as follows.
∗ Refer to "1-14. The Aperture Unit Charge Position Setting" for
the confirm method at the charge position.
1
Iris Joint Gear
3
Screw
2
Aperture Unit
- Front View -
AF Driving Unit Flexible
Board Arrangement
Boss
Soldering
- Left View -
1-15. The Aperture Unit Free Position Setting
∗ Set the Aperture Unit to a free position once, if the gear was rotated
accidentally and the charge position is disordered, or if the charge
position was shifted during disassembly.
In a free state, the edge of this spring
will move up and down about 1 mm if
the gear is moved a little.
Gear rotating
direction to make
the unit free
Gear rotating
direction to set
the charge position
In a free state, a hole in the gear almost
coincides with a hole in the Aperture Unit.
Note: The spring is deformed and cannot
be used if the gear is rotated too
much from a free state.
If the edge of spring is located downward,
rotate the gear in the arrow direction to
search a free position.
∗ In a free position, the edge of spring is
located upward.
First, check the
spring edge position.
1-16. A Mount Lug Plate (UR)
1-17. A Mount Lug Plate (UL)
1-18. AF Coupler, AF Coupler Tension Spring
AF Coupler
Claw
Boss
Boss
AF Coupler Tension Spring
∗ Note the direction.
Boss
Claw
Claw
Boss
Claw
Boss
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
4.0
1.7
1-10. BL Contact Holder Unit, BL Dust Protect Sheet
BL Dust Protect Sheet
- Front View -
- Back View -
Screw
3.9
2.0
#164: M2.0 X 3.9
(Black)
3-268-954-11
1-11. AF Driving Unit
AF Driving Unit
- Front View -
Screw
1-12. A Mount Lug Plate (Lower)
A Mount Lug Plate (Lower)
Boss
Claw
1-14. The Aperture Unit Charge Position Setting
1. Check that the Aperture Unit is in a free state.
2. After confirming that the Aperture Unit is in a free state, rotate the
gear by 3 turns.
3. After rotating the gear by 3 turns, set the Aperture Unit where the
holes in the gear and the Aperture Unit coincide. This position is the
charge position.
∗ Refer to "1-15. The Aperture Unit Free Position Setting" for
the setting and the confirm method at the free position.
DSLR-A560/A560L/A560Y/A580/A580L/A580Y/A580J_L2
3-3
the front frame set.
1-21. Ring Roller (A), Iris Ring
1. With the Aperture Unit set in the charge position (see "1-14.
The Aperture Unit Charge Position Setting" ), install it on
∗ The Aperture Unit has been set in the charge position, if it is not
removed.
However, the iris ring must be in the removed state (where the Iris
Joint Gear is not rotated).
2. Install the Iris Ring with it's a punch mark aligned with a line that
connects the Iris Joint Gear shaft and the optical axis center.
1-22. Ring Roller (B), Ring Roller (C), Ring Roller (C) Shaft
1-23. Lens Lock Button, Lens Lock Pin, Lens Lock Spring
Lens Lock Button
Lens Lock Pin
Lens Lock Spring
Optical Axis Center
Ring Roller (A)
Ring Roller (A)
Iris Ring
Iris Joint Gear Shaft Punch Mark
- Front View -
- Front View -
Ring Roller (B)
Ring Roller (B)
Iris Ring
G
G-85
Ring Roller (C)
Ring Roller (C)
Ring Roller (C)
Ring Roller (C) Shaft
Ring Roller (C) Shaft
Ring Roller (C) Shaft
Iris Ring
5.5
2.0
#163: M2.0 X 5.5 (Tapping)
(Silver)
2-695-575-11
3.0
1.7
#165: M1.7 X 3.0 (Tapping)
(Silver)
2-695-434-31
2
3
5
∗ Tighten six screws in order of the number.
1-24. Ring (SP), Mount Spacer, H Mount
H Mount
Mount Spacer
Ring (SP)
1-25. Coupler Joint Lever
Coupler Joint Lever
1
4
6
G
G-85
Screw
Assembly-2: ALX-8650 (AF Module)
ALX-8650 Flexible Board
Rib
Assembly-3: CV Media Lid Spring
CV Media Lid Spring
Rib
#166: M1.7 X 3.0 (Tapping)
(Silver)
3-271-395-11
3.0
1.7
1-19. Coupler Lever
Claw
Coupler Lever Shaft
Coupler Lever
Lever Adjustment Screw
Soldering
Lens Lock Unit
- Right View -
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
4.0
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
4.0
1.7
1-20. Lens Lock Unit
Screw
Claw
- Top View -
Claw
Screw
- Back View -
DSLR-A560/A560L/A560Y/A580/A580L/A580Y/A580J_L2
3-4
Boss
Boss
Push the surplus part of the flexible board in.
Assembly-5: Shutter Unit (AFE-3032)
Shutter Unit (AFE-3032)
Supply the power (2V, 1A) to the charge motor to rotate
it forward so as to move up the mirror completely.
Mirror
DC Power Supply
(2V, 1A)
Rib
Assembly-6: SLK-006 Flexible Board
Claw
Assembly-7: Top Cover Block
7-1. ST Strobe Base Cover Assy
ST Strobe Base Cover Assy
Shaft
Do not bend the spring.
CV Top Cover Assy
Match shape.
Open
7-2. ST Strobe Guide Arm Assy (L/R)
ST Strobe Guide Arm Assy (R)
Install ST Strobe Guide Arm Assy (L) similarly.
#91: M1.7 X 3.0 (Tapping)
(Silver)
2-695-434-
3.5
1.7
Shaft Screw
Screw
Rotate it by 180°.
7-3. ST Strobe Hinge Collar
ST Strobe Hinge Collar
Rib
Do not open the space.
Boss
Boss
Claw
SMR-001 Flexible Board
Boss
Rib
Loudspeaker
Assembly-4: SMR-001 Flexible Board, Loudspeaker
DSLR-A560/A560L/A560Y/A580/A580L/A580Y/A580J_L2
3-5
45°
45°
#12: M1.7 X 5.0 (Tapping)
(Black)
3-080-204-21
1.7
5.0
Screw (#8)
Screw (#8)
Screw (#12) Screw (#8)
Screw (#8)
Boss
Screw (#8)
7-7. Control Switch Block (TK86500)
CV Top Cover Assy Side
Control Switch Block Side
Power Knob
Power Knob
LV Knob
LV Knob
Slide Lever
Hook
“LIVE VIEW”
Side
Make "M" the horizontal.
Power Lever
Mode Dial
Mode Dial
Confirm the position of each part.
#8: M1.7 X 3.5 (Tapping)
(Silver)
3-078-890-01
3.5
1.7
7-8. Control Switch Block (TK86500) Flexible Board
Boss
Claw
Claw
Boss
7-9. Flash Unit (FL85700)
Valley fold
Valley fold
Valley fold
Rib
Boss
Adhesive Tape
Claw
Pink
White
Black
Shoe Connector Flexible Board
7-11. Flash Unit (FL85700) Harness / Shoe Connector Flexible Board
Rib
Rib
7-12. Pop Up Spring
Pop Up Spring
Rib
Hook
Rib
7-10. Microphone Unit Harness
#12: M1.7 X 5.0 (Tapping)
(Black)
3-080-204-21
1.7
5.0
7-5. Shoe Connector.
Shoe Connector
Screw
BD Eye Piece Frame
BD Eye Piece
Dust Cushion (865)
#172: M1.4 X 4.0 (Tapping)
(Black)
2-178-410-01
1.4
4.0
7-6. Plunger Solenoid
Plunger Solenoid
Boss
Screw
Solder
ST Stroboscope Lock Assy
Control Switch Block (TK86500)
Boss
Microphone Assy
7-4. Microphone Assy.
Click on the first or last page to see other DSLR-A560 / DSLR-A560L / DSLR-A560Y / DSLR-A580 / DSLR-A580J / DSLR-A580L / DSLR-A580Y service manuals if exist.