Sony DSLR-A200H (serv.man2) Service Manual ▷ View online
HELP
SAL18200 (3.5-6.3/18-200) (DT 18-200mm F3.5-6.3)
Length Groove
Barrel Assembly
Barrel Assembly
Coma Shaft-B
(First Cam Barrel Linkage Coma)
(First Cam Barrel Linkage Coma)
4.
Apply the grease (G-35) to the entire width of instruction part of the second cam barrel.
(inside circumference, outside circumference and cam areas)
5.
Assemble the zoom linkage ring, length groove barrel assembly and second cam barrel as shown in the figure.
6.
Confirm the positions in step 5, and attach the zoom linkage coma.
7.
Attach the coma shaft-B (3 pieces) and first cam barrel linkage coma (3 pieces), and set the length groove barrel assembly and holes
of the screw to the direction of the arrow.
Apply the grease (G-35)
Second Cam Barrel
Fix position of the
zoom linkage ring
zoom linkage ring
F/Z ECD board of the
length groove
barrel assembly
length groove
barrel assembly
Zoom Linkage Coma
HELP
SAL18200 (3.5-6.3/18-200) (DT 18-200mm F3.5-6.3)
HELP12
Grease (G-35):
J-6082-621-A
Adhesive bond (B-10): J-6082-612-A
1.
Apply the grease (G-35) to the shaded areas of the 1st lens slip barrel.
2.
Attach the 1st lens slip barrel, and apply the adhesive bond (B-10) to the three coma screws as shown in the figure.
1st Lens Slip Barrel
Apply the grease (G-35)
(Projection: 6 areas)
(Projection: 6 areas)
Apply the grease (G-35)
(Projection: 3 areas)
(Projection: 3 areas)
Apply the grease (G-35)
(Groove: 3 areas)
(Groove: 3 areas)
Apply the adhesive bond (B-10) (3 areas)
HELP
SAL18200 (3.5-6.3/18-200) (DT 18-200mm F3.5-6.3)
HELP13
Adhesive bond (B-10): J-6082-612-A
1.
Turn the outside barrel assembly in the direction of the arrow to attach the bayonet of the outside barrel assembly into the bayonet
part of the second cam barrel.
2.
Attach the outside barrel coma-B (3 pieces) as shown in the figure.
3.
Apply the adhesive bond (B-10) to the three screws fixing the outside barrel coma-B.
Bayonet part of the second cam barrel
Outside Barrel Assembly
Outside Barrel Coma-B
Apply the adhesive bond (B-10) (3 areas)
3-1
SAL18200 (3.5-6.3/18-200) (DT 18-200mm F3.5-6.3)
3. REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
3-1-1. 1ST LENS BARREL ASSEMBLY
DISASSEMBLY
Ref. No.
Part No.
Description
1
2-699-028-01 RUBBER RING
2
2-699-029-01 SCREW (BT2P1.7X4.5C3C)
3
2-699-030-01 FILTER SCREW FRAME
4
A-1204-572-A 1ST LENS BARREL ASSY
5
2-699-031-01 LIGHT SHIELD PLATE
6
2-699-032-01 2ND LENS RUBBER RING
7
2-699-033-01 SCREW (BTUT3.0P1.7X4C3C)
8
A-1204-573-A 2ND LENS BARREL ASSY
9
Selection part
2ND LENS ADJUSTMENT WASHER (A to E)
(Note 1)
(Note 1)
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-5.
according to adjustment etc..
Select the part referring to page 3-5.
NOTE:
•
-XX and -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•
The mechanical parts with no reference number in
the exploded views are not supplied.
the exploded views are not supplied.
10
2-699-076-01 FOCUS STOPPER SCREW
11
2-699-077-01 FOCUS STOPPER RUBBER
12
Selection part
BRUSH ADJUSTMENT WASHER (A to C) (Note 1)
13
2-699-093-01 SCREW (BT1P1.7X2C3C)
14
2-699-092-01 ZOOM BRUSH
15
2-699-086-01 ZOOM LINKAGE PLATE
16
2-699-087-01 SCREW (2P1.7X3C3C IB LOCK)
17
2-888-828-01 FRONT ORNAMENTAL PLATE
Ref. No.
Part No.
Description
A
B
A
B
D
5
6
8
2
1
2
3
7
2
(See Page 3-4.)
17
2
10
12
(Note 1)
9
(Note 1)
16
15
10
11
14
13
11
4
2
7
Ver 1.2 2007.02
Click on the first or last page to see other DSLR-A200H (serv.man2) service manuals if exist.