Sony DSC-W80 / DSC-W80HDPR / DSC-W85 (serv.man2) Service Manual ▷ View online
2-13E
DSC-W80/W85_L2
qa
Install the OVF.
*When installing the OVF, fit a projection of OVF in the groove of the ring assembly.
*When installing the OVF, fit a projection of OVF in the groove of the ring assembly.
Screw
Ring assembly
OVF
Projection
Groove
2-4-3.
CHECK THE OPERATION
Confirm the operation after installing the lens block in the set.
1
1
Power ON/OFF
2
Expansion and contraction confirming of lens and opening and shutting confirmation of barrier.
Confirm there are neither dirt nor wounds in the surface of the ornamental ring (A) and lens
if there is no problem in operation.
Wipe off when dirty.
Confirm there are neither dirt nor wounds in the surface of the ornamental ring (A) and lens
if there is no problem in operation.
Wipe off when dirty.
3
Confirm the operation with Wide/Tele.
Note:
Do not be of caught etc.
Do not allophone.
Do not allophone.
HELP
DSC-W80/W85_L2
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
Harness (Black)
Microphone
Harness (Red)
LC flexible sheet
1mm
Light interception
sheet
sheet
Cabinet (front) assy
Main frame
BT holder
SY electrostatic sheet
RL-071/078
board
board
HELP
DSC-W80/W85_L2
BT holder
Notch
Battery terminal board
Battery terminal
board
board
Notch
Notch
Battery terminal board
1
Insert the battery terminal board into a slit in the BT holder to install.
* The battery terminal board is attached with the notch for installation.
* The battery terminal board is attached with the notch for installation.
2
Fold the notch 3 or 4 times repeatedly to break.
INSTALLATION METHOD OF BATTERY TERMINAL BOARD
•
HARNESS ARRANGEMENT
Harness (Red)
Harness (White)
Harness (Black)
SY-173 board
DSC-W80/W85_L2
Link
Link
3. BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM (2/2)
OVERALL BLOCK DIAGRAM (1/2)
POWER BLOCK DIAGRAM (1/2)
POWER BLOCK DIAGRAM (2/2)
Click on the first or last page to see other DSC-W80 / DSC-W80HDPR / DSC-W85 (serv.man2) service manuals if exist.