Sony DSC-W690 (serv.man2) Service Manual ▷ View online
DSC-W690_L2
2-1
2. REPAIR PARTS LIST
Follow the disassembly in the numerical order given.
IDENTIFYING PARTS
Link
ACCESSORIES
DISCHARGING OF THE CHARGING CAPACITOR
ASSEMBLY
(ENGLISH)
NOTE:
• -XX, -X mean standardized parts, so they may have some differences from the original
• -XX, -X mean standardized parts, so they may have some differences from the original
one.
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not sup-
plied.
• Due to standardization, replacements in the parts list may be different from the parts
specified in the diagrams or the components used on the set.
• CAPACITORS:
uF:
uF:
μF
• COILS
uH:
uH:
μH
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F:
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F:
nonflammable
• SEMICONDUCTORS
In each case, u: μ, for example:
uA...:
In each case, u: μ, for example:
uA...:
μA... , uPA... , μPA... ,
uPB...
,
μPB... , μPC... , μPC... ,
uPD...,
μPD...
The components identified by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
le numéro spécifié.
• Color Indication of Appearance Parts
Example:
Example:
(SILVER) : Cabinet’s Color
(Silver) : Parts Color
• Abbreviation
AUS :
AUS :
Australian
model
BR :
Brazilian
Model
CND : Canadian model
HK
HK
: Hong Kong model
KR
: Korea model
View Position
Right View
Left View
Front View
Bottom View
Top View
Back View
SY-328
5
LCD Module
4
Main Frame
8
Charging Capacitor
(MC-206 Flexible Board)
9
Lens Block Section
• CD-835 Flexible Board
qa
BT Holder Assy
1
Cabinet (Front) Assy
2
Cabinet (Rear) Assy
3
SW-590 Board
6
Cabinet (Upper) Assy
7
RL-131 Board
q;
SY-328 Board
101
101
DSC-W690_L2
2-2
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked
of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don’t pull at wire of connector. It is
possible that a wire is snapped.
• When installing a connector, don’t press down at wire of con-
nector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
DISCHARGING OF THE CHARGING CAPACITOR (C901)
The charging capacitor is charged up to the maximum 330 V
potential.
There is a danger of electric shock by this high voltage when the
capacitor is handled by hand. The electric shock is caused by the
charged voltage which is kept without discharging when the main
power of the unit is simply turned off. Therefore, the remaining
voltage must be discharged as described below.
potential.
There is a danger of electric shock by this high voltage when the
capacitor is handled by hand. The electric shock is caused by the
charged voltage which is kept without discharging when the main
power of the unit is simply turned off. Therefore, the remaining
voltage must be discharged as described below.
Preparing the Short Jig
To preparing the short jig, a small clip is attached to each end of
a resistor of 1 k
a resistor of 1 k
Ω /1 W (1-215-869-11).
Wrap insulating tape fully around the leads of the resistor to
prevent electrical shock.
prevent electrical shock.
1 k
Ω/1 W
Wrap insulating tape.
1 k
Ω/1 W
Wrap insulating tape.
R:1 k
Ω/1 W
(Part code: 1-215-869-11)
MC-206
Flexible Board
Flexible Board
C901
Note: High-voltage cautions
Discharging the Capacitor
Short-circuit between two points with
the short jig about 10 seconds.
Short-circuit between two points with
the short jig about 10 seconds.
DSC-W690_L2
2-3
2-1. EXPLODED VIEWS
2-1-1. OVERALL SECTION
ns : not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
1
4-419-055-01
LID (140), DC (SILVER)
1
4-419-055-11
LID (140), DC (BLACK)
1
4-419-055-21
LID (140), DC (RED)
1
4-419-055-31
LID (140), DC (BLUE)
2
4-422-148-01
INSULATING SHEET (140), LCD
3
4-422-751-01
CUSHION (140), LCD (Note 2)
4
4-171-152-02
WINDOW (620), LCD (Note 2)
5
A-1867-234-A SW-590 BOARD, COMPLETE
6
1-883-782-11
FPC-029 FLEXIBLE BOARD
7
A-1865-925-A CABINET (REAR) BLOCK ASSY (C) (SILVER)
7
A-1865-926-A CABINET (REAR) BLOCK ASSY (D) (BLACK)
7
A-1865-927-A CABINET (REAR) BLOCK ASSY (E) (RED)
7
A-1865-928-A CABINET (REAR) BLOCK ASSY (F) (BLUE)
LCD901 1-802-983-11
LCD MODULE (LMS300GF07) (Note 2)
#20
2-635-591-31
SCREW (M1.4), NEW TRU-STAR, P2 (Note 1)
#244
4-412-769-21
SCREW (M1.4), NEW TRU-STAR, P2 (Note 1)
1. Remove to numerical order (
1
to
5
) in the left figure.
DISASSEMBLY
1
#20/#244 X 5
Screw
#20
#244
(Note 1)
#244
(Note 1)
#20
#244
(Note 1)
#244
(Note 1)
#20
#244
(Note 1)
#244
(Note 1)
#20
#244
(Note 1)
#244
(Note 1)
ns
ns
3
(Claws)
1
(Claw)
When assembling,
adjust the position.
adjust the position.
Front/Top Section
(See page 2-4)
2
7
4
(Note 2)
3
(Note 2)
1
5
6
LCD901
(Note 2)
(Note 2)
3
4
1
2
5
Left View
Bottom View
Right View
#20
#244
#244
#20
#244
#244
#20
#244
#244
Note
Screw's
Ref. No. (Parts Color.)
#20 (Silver)
SILVER
#244 (Black)
BLACK/RED/BLUE
Cabinet's Color
Table 2-1
Note 1
THE COMBINATION OF CABINET’S
COLOR AND SCREW
The screw pointed is different according to
the cabinet's color.
For the combination of cabinet's color and screw,
please refer to Table 2-1.
Note 2: Refer to “Assembly-3: Installation Cautions of the
LCD Cushion (140) and LCD Window (620).”
#20: M1.4 X 3.0
(Silver)
2-635-591-31
2-635-591-31
3.0
1.4
3.0
1.4
#244: M1.4 X 3.0
(Black)
4-412-769-21
4-412-769-21
4
#20/#244 X 1 → Turn the LCD (
4
)
4
Bottom View
Back View
#20
#244
#244
DSC-W690_L2
2-4
2-1-2. FRONT/TOP SECTION
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
51
X-2583-859-1 CABINET (FRONT) ASSY (140C) (SILVER)
51
X-2583-860-1 CABINET (FRONT) ASSY (140D) (BLACK)
51
X-2583-861-1 CABINET (FRONT) ASSY (140E) (RED)
51
X-2583-862-1 CABINET (FRONT) ASSY (140F) (BLUE)
52
1-489-357-11
FLASH UNIT
53
A-1867-236-A RL-131 BOARD, COMPLETE
54
4-177-708-01 RUBBER,
MICROPHONE
55
1-885-508-11
FPC-031 FLEXIBLE BOARD
56
X-2583-863-1 CABINET (UPPER) ASSY (140C) (SILVER)
56
X-2583-864-1 CABINET (UPPER) ASSY (140D) (BLACK)
56
X-2583-865-1 CABINET (UPPER) ASSY (140E) (RED)
56
X-2583-866-1 CABINET (UPPER) ASSY (140F) (BLUE)
57
4-419-059-01
INSULATING SHEET (140), RL
58
1-885-540-11
MC-206 FLEXIBLE BOARD
59
4-422-149-01
INSULATING SHEET (140)
60
4-419-058-01
SHEET, AF LIGHT INTERCEPTION
BT900
1-756-710-12
LITHIUM RECHARGEABLE BATTERY
C901
1-118-165-11
CAP, ALUMINIUM ELECT 63uF 330V
#20
2-635-591-31
SCREW (M1.4), NEW TRU-STAR, P2 (Note 1)
DISASSEMBLY
Screw
Main Section
(See page 2-5)
52
53
54
60
55
57
56
#20
BT900
: BT900 (LITHIUM RECHARGEABLE BATTERY)
Board on the mount position.
(See page 6-17 of Level 3)
Board on the mount position.
(See page 6-17 of Level 3)
2
1
4
3
58
59
51
C901
5
2
(Claw)
2
(Claw)
4
(Claw)
4
(Claw)
Note
2
#20 X 1
Back View
#20
Caution :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
1. Remove to numerical order (
1
to
5
) in the left figure.
2. The meaning of the sign in left figure is as follows. Be careful when it removes.
◇
: Solder
#20: M1.4 X 3.0
(Silver)
2-635-591-31
2-635-591-31
3.0
1.4
3
DISCHARGING OF THE CHARGING CAPACITOR
Click on the first or last page to see other DSC-W690 (serv.man2) service manuals if exist.