DOWNLOAD Sony DSC-W690 (serv.man2) Service Manual ↓ Size: 4.81 MB | Pages: 20 in PDF or view online for FREE

Model
DSC-W690 (serv.man2)
Pages
20
Size
4.81 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-w690-sm2.pdf
Date

Sony DSC-W690 (serv.man2) Service Manual ▷ View online

DSC-W690_L2
Sony Corporation
SERVICE MANUAL
Revision History
SERVICE  NOTE (Check the following note before the service.)
LEVEL 
2
Published by Sony Techno Create Corporation
983466431.pdf
Ver. 1.0  2012.03
DIGITAL STILL CAMERA
The components identified by 
mark 
0 or dotted line with mark 
0 are critical for safety.
Replace only with part number 
specified.
Les composants identifiés par 
une marque 
0 sont critiques pour 
la sécurité.
Ne les remplacer que par une piè-
ce portant le numéro spécifié.
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Brazilian Model
Photo: Silver
9-834-664-31
DSC-W690
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2012.03
Official Release
2012C08-1
  © 2012.03
1-1.  PRECAUTION ON REPLACING THE SY-328 BOARD
1-2.  METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
1-3.  HOW TO WRITE DATA TO INTERNAL MEMORY
1-4.  POWER SUPPLY ON REPAIRING
1-5. SELF-DIAGNOSIS 
FUNCTION
1-6.  PROCESS AFTER FIXING FLASH ERROR
1-7.  DEDICATED A/V CABLE (OPTIONAL ACCESSORY)
1-8.  ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
1-9.  DC MOTOR WORM ASSY REPLACING METHOD
1-10. THREE TUBE LUBRICATING BLOCK ASSY AND GROUP 1 FRAME REPLACING 
METHOD
1-11. FINAL INSPECTION
Internal memory
ON BOARD
Internal memory
ON BOARD
DSC-W690_L2
– 2 –
SPECIFICATIONS
Camera 
[System] 
Image device: 7.75 mm (1/2.3 type)
 
color CCD, Primary color filter
Total pixel number of camera:
 
Approx. 16.4 Megapixels
Effective pixel number of camera:
 
Approx. 16.1 Megapixels
Lens: Sony G 10× zoom lens
 
f = 4.45 mm – 44.5 mm (25 mm –
 
250 mm (35 mm film equivalent))
 
F3.3 (W) – F5.9 (T)
 
While shooting movies (16:9):
 
27.5 mm – 275 mm*
 
While shooting movies (4:3):
33.5 mm – 335 mm*
* When [Movie SteadyShot] is set to [Standard].
SteadyShot: Optical
Exposure control: Automatic exposure,
 
Scene Selection (11 modes)
White balance: Automatic, Daylight,
 
Cloudy, Fluorescent 1/2/3,
 
Incandescent, Flash, One Push
Recording interval for Burst mode:
 
Approx. 1.0 second
File format:
 
Still images: JPEG (DCF, Exif,
 
MPF Baseline) compliant, DPOF
 compatible
 Movies: 
MPEG-4 
AVC/H.264
Recording media: Internal Memory
 
(Approx. 27 MB), “Memory Stick
 
Duo” media, “Memory Stick
 
Micro” media, SD cards, microSD
 memory 
cards
Flash: Flash range (ISO sensitivity
 
(Recommended Exposure Index)
 set 
to 
Auto):
 
Approx. 0.3 m to 3.3 m (W) (11 7/8
 
inches to 10 feet 10 inches)
 
Approx. 1.5 m to 1.9 m (T) (4 feet
 
11 1/8 inches to 6 feet 2 7/8 inches)
[Input and Output connectors]
USB / A/V OUT jack:
 Video 
output
 Audio 
output
 USB 
communication
USB communication: Hi-Speed USB
 (USB 
2.0)
[Screen]
LCD screen:
 
7.5 cm (3.0 type) TFT drive
Total number of dots:
 
230 400 dots
[Power, general]
Power: Rechargeable battery pack
 NP-BN, 
3.6 
V
Power consumption (during shooting):
 1.1 
W
Operating temperature:
 
0°C to 40°C (32°F to 104°F)
Storage temperature:
 
–20°C to +60°C (–4°F to +140°F)
Dimensions (CIPA compliant):
 
94.3 mm × 56.1 mm × 21.7 mm
 
(3 3/4 inches × 2 1/4 inches × 7/8
 inches) 
(W/H/D)
Mass (CIPA compliant) (including NP-
 
BN battery pack, “Memory Stick
 Duo” 
media):
 
Approx. 142 g (5.0 oz)
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III:
 Compatible
BC-CSN/BC-CSNB battery 
charger
Power requirements: AC 100 V to
 
240 V, 50 Hz/60 Hz, 2 W
Output voltage: DC 4.2 V, 0.25 A
Operating temperature:
 
0°C to 40°C (32°F to 104°F)
Storage temperature:
 
–20°C to +60°C (–4°F to +140°F)
Dimensions:
 
Approx. 55 mm × 24 mm × 83 mm
 
(2 1/4 inches × 31/32 inches × 3 3/
 
8 inches) (W/H/D)
Mass: Approx. 55 g (1.9 oz)
Rechargeable battery pack
NP-BN
Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 0.9 A
Capacity:
 
typical: 2.3 Wh (630 mAh)
 
minimum: 2.2 Wh (600 mAh)
Design and specifications are subject to
change without notice.
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0 OR DOTTED LINE WITH 
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST 
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS 
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY 
SONY. 
ATTENTION AU  COMPOSANT  AYANT  RAPPORT 
À  LA  SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 
0 SUR LES 
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT 
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES 
SUPPLÉMENTS PUBLIÉS PAR SONY.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following 
safety checks before releasing the set to the customer.
1.  Check the area of your repair for unsoldered or poorly-soldered 
connections. Check the entire board surface for solder splashes and 
bridges.
2.  Check the interboard wiring to ensure that no wires are “pinched” 
or contact high-wattage resistors.
3.  Look for unauthorized replacement parts, particularly transistors, 
that were installed during a previous repair. Point them out to the 
customer and recommend their replacement.
4.  Look for parts which, through functioning, show obvious signs of 
deterioration. Point them out to the customer and recommend their 
replacement.
5.  Check the B+ voltage to see it is at the values specified.
6.  Flexible Circuit Board Repairing
•   Set the soldering iron tip temperature to 350 °C approximately.
•  Do not touch the soldering iron on the same conductor of the circuit 
board (within 3 times).
•   Be careful not to apply force on the conductor when soldering or 
unsoldering.
UNLEADED SOLDER
This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free 
mark (LF) indicating the solder contains no lead.
(Caution:  Some printed circuit boards may not come printed with the 
lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
•   Set the soldering iron tip temperature to 350 °C approximately. 
If cannot control temperature, solder/unsolder at high temperature 
for a short time.
Caution:  The printed pattern (copper foil) may peel away if the 
heated tip is applied for too long, so be careful!  
Unleaded solder is more viscous (sticky, less prone to 
flow) than ordinary solder so use caution not to let solder 
bridges occur such as on IC pins, etc.
•   Be sure to control soldering iron tips used for unleaded solder and 
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
DSC-W690_L2
1-1
1. SERVICE  NOTE
1-1.  PRECAUTION ON REPLACING THE SY-328 BOARD
DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATION DATA WRITE”.
RESTORE DATA
When you replace to the repairing board, get the data from the former one.
Start the Adjust Manual in the Adjust Station and perform “RESTORE DATA” to get the data. 
The data getting for this model is as follows.
• USB SERIAL No.
• Hash data setting
• Custom Setting Backup
• AWB standard data input & check, Color reproduction check
Regarding the PlayMemories Home
PlayMemories Home has been written in internal memory.
SY-328 board for service is supplied with written the PlayMemories Home.
USB SERIAL No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.
Angular Velocity Sensor
When you replace to the repairing board, write down the sensitivity displayed on the angular velocity sensor (SE403).
Start the Adjust Manual in the Adjust Station and execute the “Angular velocity sensor sensitivity adj”.
SE403
SY-328 BOARD (SIDE B)
P: PITCH sensor sensitivity
Y: YAW sensor sensitivity
Type A:
Type B:
Y
P
Y
P
Y
P
Note: The sensor sensitivity of SE403 of SY-328 board is written only repair parts.
1-2.  METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)
Note 1:When replacing the SY-328 board, erase the data in internal memory of the board before replacement.
Note 2:When replacing the SY-328 board, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Copy 
Copies all images in the internal memory to a memory card. 
1. Insert a memory card with sufficient free capacity into the camera. 
2. MENU   
(Settings)    
(Memory 
Card 
Tool)  
[Copy]  
[OK]   
Notes 
Make sure there is sufficient battery power. Otherwise, the battery power may run out when you attempt 
to copy image files, causing the copy to fail and possibly corrupt the data. 
Images cannot be copied individually. 
The original images in the internal memory are retained even after copying. To delete the contents of the 
internal memory, remove the memory card after copying, then format the internal memory ([Format] in 
[Internal Memory Tool]). 
A new folder is created on the memory card and all the data will be copied to it. You cannot choose a 
specific folder and copy images to it. 
Method for Formatting the Internal Memory or “Memory Stick Duo” media
Format
Formats the memory card or the internal memory. When you use a memory card with this camera for the first 
time, it is recommended to format the card using the camera for stable performance of the memory card 
before shooting. Note that formatting permanently erases all data on the memory card, and is unrecoverable. 
Save precious data on a computer, etc. 
1. MENU 
 
 (Settings) 
 
 (Memory Card Tool) or 
 (Internal Memory Tool) 
 [Format] 
 
[OK]   
Note 
Note that formatting permanently erases all data including even protected images. 
DSC-W690_L2
1-2
1-3.  HOW TO WRITE DATA TO INTERNAL MEMORY
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
To change settings is enabled with using the writing enabler tool (Write Enable Tool) on the Adjust Manual is activating from the Adjust Station.
Data writing method
1)  Start the Adjust Manual from the Adjust Station.
2) Click 
 (Write Enable Tool) button.
3)  Click “Activate Write Enable Mode” button.
4)  Upon completion of the setting change, the following message will be displayed.
5)  Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage).
 
Perform the following procedure at the method order 5) when using [Write Enable Tool]. 
 
1.   Disconnect the USB cable from the camera.
 
2.   Remove the Adjustment mode setting MS from the camera.
 
3.   Insert a Memory Stick (except Adjustment mode setting MS) into the camera, and then remove it.
 
4.   Reconnect the USB cable to the camera so that the camera is connected in  the Mass-Storage mode.
6)  Write the data read out into the PC to the internal memory of the camera.
7)  Disconnect the PC from the camera, and turn off the camera.
Note: By turning off the camera, the write enable setting is reset.
1-4.  POWER SUPPLY ON REPAIRING
Use the battery (NP-BN) on repairing.
The external battery source cannot be used on repairing.
1-5. SELF-DIAGNOSIS FUNCTION
1-5-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis func-
tion starts working, and displays on the LCD screen what to do.
Details of the self-diagnosis functions are provided in the Instruction 
manual.
1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen shows 
a 4-digit display consisting of an alphabet and numbers, which blinks at 
3.2 Hz. This 5-character display indicates the “repaired by:”, “block” in 
which the problem occurred, and “detailed code” of the problem.
0 0
3 2
C
Repaired by:
Refer to “1-5-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
13 ....Format the “memory card”.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
E : Corrected by service
engineer
LCD screen
Page of 20
Display

Sony DSC-W690 (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sony DSC-W690 (serv.man2) Service Manual ↓ Size: 4.81 MB | Pages: 20 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DSC-W690 (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sony DSC-W690 (serv.man2) Digital Camera. Information contained in Sony DSC-W690 (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.