Sony DSC-W610 (serv.man2) Service Manual ▷ View online
DSC-W610_L2
2-6
2-1-4. LENS BLOCK SECTION
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
151
8-848-862-01
DEVICE, LENS LSY-1380B (Note 1, 2, 4)
151
A-1799-285-A DEVICE, LENS LSV-1380E (Note 1, 2
, 4
)
152
4-155-850-
01
RING A (S), ORNAMENTAL
153
4-147-109-01 TAPE,
BARRIER
154
A-1743-714-A BARRIER ASSY (Note 4)
154
A-1799-286-A BARRIER BLOCK ASSY (1380E)
(Note 4)
155
4-147-091-01
FRAME, 1 GROUP
156
A-1743-728-A CAM
TUBE
BLOCK
ASSY
157
A-1743-727-A STRAIGHT
TUBE
LUBRICATED
ASSY
158
1-787-874-11
STEPPING MOTOR, OPTICAL(F1380)
159
4-147-113-01 SEAL,
FG
160
A-1743-730-A WORM B LUBRICATED ASSY
161
A-1743-731-A NARUTO GEAR LUBRICATED ASSY
162
A-1743-725-A DC MOTOR WORM A ASSY
163
A-1798-783-A CD-774 BOARD, COMPLETE
(including IC001 (CCD imager)) (Note 3)
#30
3-086-156-11 SCREW
B1.2
#176 3-947-504-31 SCREW
(M1.2)
1. The meaning of the sign in left figure is as follows. Be careful when it removes.
◇-X
: Solder
DISASSEMBLY
#30
#30
#30
#176
151
(Note 1, 2,
4
)
(Note 3)
152
ns
ns
ns
ns
ns
ns
ns
158
153
153
154
155
156
157
160
159
161
162
163
(including IC001
(CCD imager))
(CCD imager))
(Note 4)
Note
Note 2: Refer to the following each item when you exchange parts of Lens Block.
• 1-8.
ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD (page1-7)
• 1-9.
OPTICAL STEPPING MOTOR (F1380) REPLACING METHOD (page 1-7)
• 1-10. DC MOTOR WORM A ASSY REPLACING METHOD (page 1-8)
• 1-11. CAM TUBE BLOCK ASSY and STRAIGHT TUBE LUBRICATED ASSY and
• 1-11. CAM TUBE BLOCK ASSY and STRAIGHT TUBE LUBRICATED ASSY and
1 GROUP FRAME REPLACING METHOD (page 1-8)
• 1-12. FINAL INSPECTION (page 1-12)
Note 3: Be sure to read “Precautions for Replacement of Imager”
on page 6-1 of Level3 when changing the imager.
Note 3: イメージャの交換時はLevel3の6-1ページ、 イメージャ交
換時の注意 を必ずお読みください。
Note 1:
Hold the Lens Block at the
center of both sides.
center of both sides.
Do not hold the following part.
Hold here.
Lens Flexible Board
PRECAUTIONS WHEN HOLDING THE LENS BLOCK
Screw
#30: M1.2 X 3.5 (Tapping)
(White)
3-086-156-11
3-086-156-11
3.5
1.2
#176: M1.2 X 2.0
(Silver)
3-947-504-31
3-947-504-31
2.0
1.2
Note 2: レンズブロックの各部品を交換する際は，下記の各項目を参照してください。
• 1-8.
ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD (page1-7)
• 1-9.
OPTICAL STEPPING MOTOR (F1380) REPLACING METHOD (page 1-7)
• 1-10. DC MOTOR WORM A ASSY REPLACING METHOD (page 1-8)
• 1-11. CAM TUBE BLOCK ASSY and STRAIGHT TUBE LUBRICATED ASSY and
• 1-11. CAM TUBE BLOCK ASSY and STRAIGHT TUBE LUBRICATED ASSY and
1 GROUP FRAME REPLACING METHOD (page 1-8)
• 1-12. FINAL INSPECTION (page 1-12)
ns : not supplied
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2012.05
Note 4: Refer to “1-8. Notes on Replacing the Lens” on page 1-3.
Note 4: 1-6ページの 1-8. レンズ交換時の注意 を参照してくださ
い。
DSC-W610_L2
2-7E
ACCESSORIES
901
902
903
904
905
906
907
This item is supplied with the unit as an accessory, but is not prepared as a service part.
951
Ref. No. Part No.
Description
Remark
951
(Not supplied) Rechargeable battery pack (NP-BN)
Note 1: Dedicated A/V cable (optional accessory)
Dedicated A/V cable is not supplied with this model.
If you need dedicated A/V cable, order 1-834-312-4[] or VMC-
15CSR1.
15CSR1.
Note 2: This unit has no bundled CD-ROM.
Contents included in the CD-ROM will be supplied to customers as
follows.
Contents included in the CD-ROM will be supplied to customers as
follows.
・ User Guide (HTML)
- You can access to the URL of support site described in the In-
struction Manual.
- All of the contents in the User Guide are included in the Instruction
Manual or built-in guide.
・ Application Software
- By connecting this unit and Windows PC with the USB cable, the
application software [PlayMemories Home Lite version] can be
installed on the PC from the unit.
installed on the PC from the unit.
- In case of using the extended version, install “Expanded Feature”
via Internet.
Ref. No. Part No.
Description
901
1-487-523-21
Battery charger (BC-CSN/BC-CSNB) (US, CND)
901
1-487-523-31
Battery charger (BC-CSN/BC-CSNB) (CH)
901
1-487-523-51
Battery charger (BC-CSN/BC-CSNB) (J)
901
1-487-523-62
Battery charger (BC-CSN/BC-CSNB)
(EXCEPT US, CND, CH, J)
902
1-837-421-11
Power cord (mains lead) (UK, E (Saudi))
902
1-837-422-11
Power cord (mains lead) (JE)
902
1-837-427-11
Power cord (mains lead) (AEP, E (EXCEPT Saudi), BR)
902
1-837-428-11
Power cord (mains lead) (KR)
902
1-837-429-11
Power cord (mains lead) (AUS)
903
1-569-007-12
Conversion (2P) Adaptor (JE)
904
1-569-008-33
Conversion (2P) Adaptor (E: NTSC)
905
1-834-311-51
Dedicated USB cable
906
2-050-981-01
Wrist strap (Gray) (SILVER, PINK, GREEN)
906
2-050-981-11
Wrist strap (Black) (BLACK, BLUE)
907
4-410-123-01
Instruction Manual (JAPANESE)
907
4-410-123-11
Instruction Manual (SIMPLIFIED CHINESE)
907
4-410-124-11
Instruction Manual (ENGLISH)
* 907
4-410-124-31
Instruction Manual (ENGLISH, RUSSIAN, UKRAINIAN)
* 907
4-410-124-41
Instruction Manual (ENGLISH, FRENCH, ITALIAN,
SPANISH, PORTUGUESE, GERMAN, DUTCH,
TURKISH, GREEK, POLISH, CZECH, HUNGARIAN,
SLOVAK, SWEDISH, FINNISH, NORWEGIAN,
DANISH, CROATIAN, ROMANIAN)
* 907
4-410-124-51
Instruction Manual (ENGLISH, SIMPLIFIED CHINESE,
TRADITIONAL CHINESE, MALAY, INDONESIAN, THAI,
ARABIC,
PERSIAN)
* 907
4-410-124-71 Instruction Manual
(ENGLISH, SIMPLIFIED CHINESE, TRADITIONAL
CHINESE, INDONESIAN, ARABIC, PERSIAN)
Ref. No. Part No.
Description
907
4-410-124-91
Instruction Manual (KOREAN)
* 907
4-411-579-11
Instruction Manual (ENGLISH, SPANISH)
* 907
4-411-579-21
Instruction Manual (ENGLISH, FRENCH)
* 907
4-411-579-31 Instruction Manual
(ENGLISH, SPANISH, PORTUGUESE)
* 907
4-411-579-41 Instruction Manual
(ENGLISH, SPANISH, PORTUGUESE, SIMPLIFIED
CHINESE, TRADITIONAL CHINESE, KOREAN)
* 907
4-411-598-21
Instruction Manual (ENGLISH, ARABIC, PERSIAN)
Ver. 1.2 2012.06
This Item is not supplied with the unit as an accessory, but it is prepared as a service part.
When the customer requests printed one, ask Head Quarter.
When the customer requests printed one, ask Head Quarter.
961
Ref. No. Part No.
Description
* 961
4-412-835-01
User Guide (JAPANESE)
* 961
4-412-835-11
User Guide (ENGLISH)
* 961
4-412-835-21
User Guide (FRENCH)
* 961
4-412-835-31
User Guide (ITALIAN)
* 961
4-412-835-41
User Guide (SPANISH)
* 961
4-412-835-51
User Guide (PORTUGUESE)
* 961
4-412-835-61
User Guide (GERMAN)
* 961
4-412-835-71
User Guide (DUTCH)
* 961
4-412-835-81
User Guide (TRADITIONAL CHINESE)
* 961
4-412-835-91
User Guide (SIMPLIFIED CHINESE)
* 961
4-412-836-11
User Guide (RUSSIAN)
* 961
4-412-836-21
User Guide (ARABIC)
* 961
4-412-836-31
User Guide (PERSIAN)
* 961
4-412-836-41
User Guide (KOREAN)
* 961
4-412-836-51
User Guide (POLISH)
* 961
4-412-836-61
User Guide (CZECH)
* 961
4-412-836-71
User Guide (HUNGARIAN)
* 961
4-412-836-81
User Guide (SLOVAK)
* 961
4-412-836-91
User Guide (SWEDISH)
* 961
4-412-837-11
User Guide (FINNISH)
* 961
4-412-837-21
User Guide (NORWEGIAN)
* 961
4-412-837-31
User Guide (DANISH)
* 961
4-412-837-41
User Guide (THAI)
* 961
4-412-837-51
User Guide (MALAY)
* 961
4-412-837-61
User Guide (TURKISH)
* 961
4-412-837-71
User Guide (GREEK)
* 961
4-412-837-81
User Guide (UKRAINIAN)
* 961
4-412-837-91
User Guide (CROATIAN)
* 961
4-412-838-11
User Guide (ROMANIAN)
* 961
4-412-838-21
User Guide (INDONESIAN)
* 961
4-412-838-31
User Guide (BRAZILIAN PORTUGUESE)
DSC-W610_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Method of Battery Terminal Board
Insert the battery terminal board into a slit in
BT holder to install.
* Battery terminal board is attached with
BT holder to install.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery ]
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery ]
terminal board will be bent.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Notch
Battery terminal board
Battery terminal board
Notch
Battery terminal
board
board
Notch
Assembly-2: Insulating Sheet (670) Putting Position
Insulating Sheet (670)
SY-285 Board
Insulating Sheet (670)
Assembly-3: Precaution During of MA-480 Flexible Board
Installation.
Route the speaker harness and microphone
harness as shown below.
harness as shown below.
Speaker
Harness
Harness
Tape SP
Microphone
Harness
Harness
MA-480 Flexible
Board
Board
Microphone
Harness
Harness
MA-480 Flexible
Board
Board
Assembly-4: Precaution During of Cabinet (Rear) Assy
Installation.
Align the slide switch at the camera mode,
when install cabinet (rear) assy.
when install cabinet (rear) assy.
Slide Switch
Cabinet (Rear) Assy
Assembly-5: Attaching Method of LCD Cushion (030),
LCD Window (670)
Apply LCD cushion (030).
And have the Tab of the Release Paper and peel it off.
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Cabinet (Rear) Assy
Mike Lid (030)
Fit LCD Window (670) into the flame of
Cabinet (Rear) Assy and attach it on LCD Cushion (030).
Cabinet (Rear) Assy and attach it on LCD Cushion (030).
LCD Cushion (030)
LCD Window (670)
Rear Cabinet Assy
Blow the air before attaching.
Be sure to keep away from dust.
Be sure to keep away from dust.
LCD Cushion (030)
LCD
Align corner of
LCD cushion (030)
with corner of LCD.
LCD cushion (030)
with corner of LCD.
Tab
Release Paper
DSC-W610_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Method of Battery Terminal Board
Insert the battery terminal board into a slit in
BT holder to install.
* Battery terminal board is attached with
BT holder to install.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery ]
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery ]
terminal board will be bent.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Notch
Battery terminal board
Battery terminal board
Notch
Battery terminal
board
board
Notch
Assembly-2: Insulating Sheet (670) Putting Position
Insulating Sheet (670)
SY-285 Board
Insulating Sheet (670)
Assembly-3: Precaution During of MA-480 Flexible Board
Installation.
Route the speaker harness and microphone
harness as shown below.
harness as shown below.
Speaker
Harness
Harness
Tape SP
Microphone
Harness
Harness
MA-480 Flexible
Board
Board
Microphone
Harness
Harness
MA-480 Flexible
Board
Board
Assembly-4: Precaution During of Cabinet (Rear) Assy
Installation.
Align the slide switch at the camera mode,
when install cabinet (rear) assy.
when install cabinet (rear) assy.
Slide Switch
Cabinet (Rear) Assy
Assembly-5: Attaching Method of LCD Cushion (030),
LCD Window (670)
Apply LCD cushion (030).
And have the Tab of the Release Paper and peel it off.
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Cabinet (Rear) Assy
Mike Lid (030)
Fit LCD Window (670) into the flame of
Cabinet (Rear) Assy and attach it on LCD Cushion (030).
Cabinet (Rear) Assy and attach it on LCD Cushion (030).
LCD Cushion (030)
LCD Window (670)
Rear Cabinet Assy
Blow the air before attaching.
Be sure to keep away from dust.
Be sure to keep away from dust.
LCD Cushion (030)
LCD
Align corner of
LCD cushion (030)
with corner of LCD.
LCD cushion (030)
with corner of LCD.
Tab
Release Paper
