Sony DSC-W300 (serv.man2) Service Manual ▷ View online
HELP
DSC-W300_L2
Adhesive Sheet (LCD Flexible)
Adhesive Sheet
(LCD Flexible)
(LCD Flexible)
Try to put it the flexible board
becomes at right angle
you can.
becomes at right angle
you can.
Sheet (Radiation) (LCD)
Main Frame Assy
HELP03
0 to 0.5mm
Be sure to put it to Adhesive Sheet
(LCD Flexible) while pressing it to the
side of LCD with a ruler or the like.
(LCD Flexible) while pressing it to the
side of LCD with a ruler or the like.
Be sure not to put it
out of this range
(the width of Sheet
(Radiation) (LCD)).
out of this range
(the width of Sheet
(Radiation) (LCD)).
HELP
DSC-W300_L2
HELP06
HELP04
Sheet
0 to 1 mm
Be sure not to put it
out of the flexible cable
outline.
out of the flexible cable
outline.
(Lens Flexible)
Sheet (MC)
Center
Main Frame Assy
0 to 2mm
0 to 2mm
Hole
Sheet (MC)
MC-193
Flexible Board
Flexible Board
Edge of
Connector
Connector
HELP05
Be sure not to put it out
of connector outline.
of connector outline.
HELP
DSC-W300_L2
Battery Holder
Lib
Cushion (BTH)
HELP09
HELP07
+1mm
1mm
Sheet S (Cabinet Front)
HELP08
0 to 2mm
0 to 2 mm
Tape (ST)
(10 x 15 mm)
HELP
DSC-W300_L2
HELP10
Sheet
(Speaker)
(Speaker)
Loudspeaker
(1.0cm)
(1.0cm)
Lithium Rechargeable
Battery
Battery
ST-191 Board
ST-191 Board
ST-191 Board
Solderling Point
(1.0 mm maximum)
(1.0 mm maximum)
Solderling Point
(1.0 mm maximum)
(1.0 mm maximum)
Solderling Point
(1.0 mm maximum)
(1.0 mm maximum)
Solderling Point
(1.5 mm maximum)
(1.5 mm maximum)
Solderling Point
(1.0 mm maximum)
(1.0 mm maximum)
Harness
(Brown)
(Brown)
Harness
(White)
(White)
Microphone Block
Location of attaching
Loudspeaker (1.0 cm)
Loudspeaker (1.0 cm)
In case of attaching Sheet
(Speaker), bend the flexible
board from Loudspeaker (1.0 cm).
(Speaker), bend the flexible
board from Loudspeaker (1.0 cm).
Sheet
(Speaker)
(Speaker)
ST-191 Board
ST-191 Board
ST-191 Board
Flash Unit
1
Put Loudspeaker (1.0 cm) and
be sure to solder it so that the soldering
points’ height becomes within 1.0 mm.
points’ height becomes within 1.0 mm.
3
Put Lithium Rechargeable Battery and
be sure to solder it so that the soldering
points’ height becomes within 1.0 mm.
points’ height becomes within 1.0 mm.
4
Put Flash Unit and be sure to solder it
so that the soldering points’ height
becomes as shown in the figure.
becomes as shown in the figure.
5
Be careful about the colors of harnesses
before soldering.
2
Attach Sheet (Speaker) to ST-191 board and
Loudspeaker (1.0 cm).
Click on the first or last page to see other DSC-W300 (serv.man2) service manuals if exist.