Sony DSC-W110 / DSC-W115 (serv.man3) Service Manual ▷ View online
6-32
DSC-W110/W115_ADJ
(3) AGING_MREC
In the AGING_MREC mode, motion pictures are continuously
recorded for the time (sec.) set to the “Rec Time” at the interval
(sec.) set to the “Rec Interval”.
At the start of AGING_MREC, the counter in the camera is ini-
tialized. This counter counts the number of recording times dur-
ing the execution of AGING_MREC, and it holds the counts
even during the power off.
recorded for the time (sec.) set to the “Rec Time” at the interval
(sec.) set to the “Rec Interval”.
At the start of AGING_MREC, the counter in the camera is ini-
tialized. This counter counts the number of recording times dur-
ing the execution of AGING_MREC, and it holds the counts
even during the power off.
AGING_MREC screen and functions of each item
1
[Preparation] button
Notes for aging is displayed.
Notes for aging is displayed.
2
Rec Time setting and display
The setting of recording time (sec.) is displayed. The setting
can be changed by entering a numeric value in this field.
The setting of recording time (sec.) is displayed. The setting
can be changed by entering a numeric value in this field.
3
Rec Interval setting and display
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
The setting of recording interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
4
[START] button
The AGING_MREC starts. In the AGING_MREC mode, the
aging starts immediately when the [START] button is clicked.
At the battery end, the AGING_MREC stops. To interrupt the
AGING_MREC, use the [STOP] button, though the
AGING_MREC stops also by the power off or RESET button.
The AGING_MREC starts. In the AGING_MREC mode, the
aging starts immediately when the [START] button is clicked.
At the battery end, the AGING_MREC stops. To interrupt the
AGING_MREC, use the [STOP] button, though the
AGING_MREC stops also by the power off or RESET button.
5
[STOP] button
The AGING_MREC stops.
The AGING_MREC stops.
6
[GET] button
After the AGING_MREC was executed, the number of record-
ing times is got from the counter in the camera. The result is
displayed in the “Count” display field.
After the AGING_MREC was executed, the number of record-
ing times is got from the counter in the camera. The result is
displayed in the “Count” display field.
7
Count display
The number of recording times got by the [GET] button is dis-
played.
The number of recording times got by the [GET] button is dis-
played.
(4) AGING_PB
In the AGING_PB mode, pictures are continuously played back at
the interval (sec.) set to the “Play Back Interval”.
At the start of AGING_PB, the counter in the camera is initial-
ized. This counter counts the number of play back times during
the execution of AGING_PB, and it holds the counts even during
the power off.
the interval (sec.) set to the “Play Back Interval”.
At the start of AGING_PB, the counter in the camera is initial-
ized. This counter counts the number of play back times during
the execution of AGING_PB, and it holds the counts even during
the power off.
AGING_PB screen and functions of each item
1
[Preparation] button
Notes for aging is displayed.
Notes for aging is displayed.
2
Play Back Interval setting and display
The setting of play back interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
The setting of play back interval (sec.) is displayed. The set-
ting can be changed by entering a numeric value in this field.
3
[START] button
The AGING_PB starts. In the AGING_PB mode, the aging
starts immediately when the [START] button is clicked.
At the battery end, the AGING_PB stops. To interrupt the
AGING_PB, use the [STOP] button, though the AGING_PB
stops also by the power off or RESET button.
The AGING_PB starts. In the AGING_PB mode, the aging
starts immediately when the [START] button is clicked.
At the battery end, the AGING_PB stops. To interrupt the
AGING_PB, use the [STOP] button, though the AGING_PB
stops also by the power off or RESET button.
4
[STOP] button
The AGING_PB stops.
The AGING_PB stops.
5
[GET] button
After the AGING_PB was executed, the number of play back
times is got from the counter in the camera. The result is dis-
played in the “Count” display field.
After the AGING_PB was executed, the number of play back
times is got from the counter in the camera. The result is dis-
played in the “Count” display field.
6
Count display
The number of play back times got by the [GET] button is
displayed.
The number of play back times got by the [GET] button is
displayed.
6
4
5
1
7
2 3
5
3
4
1
6
2
6-33E
DSC-W110/W115_ADJ
2-3.
DATA BACKUP
With the “DATA BACKUP”, the adjustment data in the camera
can be backed up in the PC as a file.
The adjustment data that can be backed up are as follows.
can be backed up in the PC as a file.
The adjustment data that can be backed up are as follows.
System Control Section:
1) Video System Adjustments
2) LCD System Adjustments
1) Video System Adjustments
2) LCD System Adjustments
Camera Control Section:
1) Camera System Adjustments
1) Camera System Adjustments
1.
Function of Each Button on Data Backup Screen
Click the [DATA BACKUP] button on the Main Menu screen, and
the “DATA BACKUP” screen in Fig. 6-2-3 will appear.
the “DATA BACKUP” screen in Fig. 6-2-3 will appear.
Fig. 6-2-3
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
[Data Read and Save] button
Read the adjustment data from the camcorder and save them
in PC as a file.
Default file name is as follows:
Read the adjustment data from the camcorder and save them
in PC as a file.
Default file name is as follows:
3
[Data Load and Write] button
Load the adjustment data from the file saved in PC and write
them to the camcorder.
Load the adjustment data from the file saved in PC and write
them to the camcorder.
DSC-W110_ADJBAK_xxxxxxxx_yyyymmdd.dat
Date
USB serial number
Data name
USB serial number
Data name
1
2
3
Revision History
Reverse
DSC-W110/W115_ADJ
Ver.
1.0
1.1
1.2
1.3
Date
2008.03
2008.05
2008.06
2008.08
History
Official Release
Revised-1
(A1 DI08-075)
(A1 DI08-075)
Revised-2
(A2 DI08-111)
(A2 DI08-111)
Revised-3
(A3 DI08-205)
(A3 DI08-205)
Contents
—
Replace the previously issued SERVICE
MANUAL 9-852-298-51 with this Manual.
• Change of Automatic Adjustment Program
MANUAL 9-852-298-51 with this Manual.
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.0r01 into
Ver_1.1r02.
has been changed from Ver_1.0r01 into
Ver_1.1r02.
• Addition of Thai Model
S.M. revised:
S.M. revised:
Page 6-8
,
Page 6-11
Replace the previously issued SERVICE
MANUAL 9-852-298-52 with this Manual.
• Change of Automatic Adjustment Program
MANUAL 9-852-298-52 with this Manual.
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.1r02 into
Ver_1.2r03.
has been changed from Ver_1.1r02 into
Ver_1.2r03.
• Correction of Destination Data Write
S.M. revised:
S.M. revised:
Page 6-8
Replace the previously issued SERVICE
MANUAL 9-852-298-53 with this Manual.
• Change of Automatic Adjustment Program
MANUAL 9-852-298-53 with this Manual.
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.2r03 into
Ver_1.3r04.
has been changed from Ver_1.2r03 into
Ver_1.3r04.
• Change of Fig. 6-1-2
• Addition of the “Setting Distance between
• Addition of the “Setting Distance between
Pattern Box and Camera”
• Addition of the “Precautions When Using
Pattern Box”
• Correction of the “Setting of Adjustment
Mode”
S.M. revised:
Page 6-3
,
Page 6-5
,
Page 6-6
,
Page 6-8
,
Page 6-9
S.M. Rev.
issued
—
Yes
Yes
Yes
985229854.pdf
Revision History
Reverse
DSC-W110/W115_ADJ
Ver.
1.0
1.1
1.2
1.3
Date
2008.03
2008.05
2008.06
2008.08
History
Official Release
Revised-1
(A1 DI08-075)
(A1 DI08-075)
Revised-2
(A2 DI08-111)
(A2 DI08-111)
Revised-3
(A3 DI08-205)
(A3 DI08-205)
Contents
—
Replace the previously issued SERVICE
MANUAL 9-852-298-51 with this Manual.
• Change of Automatic Adjustment Program
MANUAL 9-852-298-51 with this Manual.
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.0r01 into
Ver_1.1r02.
has been changed from Ver_1.0r01 into
Ver_1.1r02.
• Addition of Thai Model
S.M. revised:
S.M. revised:
Page 6-8
,
Page 6-11
Replace the previously issued SERVICE
MANUAL 9-852-298-52 with this Manual.
• Change of Automatic Adjustment Program
MANUAL 9-852-298-52 with this Manual.
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.1r02 into
Ver_1.2r03.
has been changed from Ver_1.1r02 into
Ver_1.2r03.
• Correction of Destination Data Write
S.M. revised:
S.M. revised:
Page 6-8
Replace the previously issued SERVICE
MANUAL 9-852-298-53 with this Manual.
• Change of Automatic Adjustment Program
MANUAL 9-852-298-53 with this Manual.
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.2r03 into
Ver_1.3r04.
has been changed from Ver_1.2r03 into
Ver_1.3r04.
• Change of Fig. 6-1-2
• Addition of the “Setting Distance between
• Addition of the “Setting Distance between
Pattern Box and Camera”
• Addition of the “Precautions When Using
Pattern Box”
• Correction of the “Setting of Adjustment
Mode”
S.M. revised:
Page 6-3
,
Page 6-5
,
Page 6-6
,
Page 6-8
,
Page 6-9
S.M. Rev.
issued
—
Yes
Yes
Yes
985229854.pdf