Sony DSC-W110 / DSC-W115 (serv.man3) Service Manual ▷ View online
6-20
DSC-W110/W115_ADJ
4.
CAMERA Adjustment 3
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. F No. Compensation
4. Measure Gain, LV Adj.
5. Mechanical Shutter Adj.
6. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. F No. Compensation
4. Measure Gain, LV Adj.
5. Mechanical Shutter Adj.
6. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 3.
2) The Automatic Adjustment Program executes the “1. Data Set-
1) Click the [Start] button of the CAMERA Adjustment 3.
2) The Automatic Adjustment Program executes the “1. Data Set-
ting during Camera Adj.”.
3) Upon successful completion of “1. Data Setting during Cam-
era Adj.”, “2. Picture Frame Setting” is executed. The follow-
ing message is displayed, and then referring to Fig. 6-1-16 to
Fig. 6-1-18, set the subject and click the [OK] button.
ing message is displayed, and then referring to Fig. 6-1-16 to
Fig. 6-1-18, set the subject and click the [OK] button.
After that, the next message is displayed. Then, change the chart
in accordance with the message.
in accordance with the message.
4) Click the [OK] button, and the items from “3. F No. Compen-
sation.” to “6. Release of Data Setting during Camera Adj.”
will be executed.
will be executed.
5) Upon successful completion of all items of the CAMERA
Adjustment 3, the following message is displayed. Click the
[OK] button.
[OK] button.
3.
Picture Frame Setting (Standard Picture Frame)
In the “CAMERA Adjustment 3 and CAMERA Adjustment 4”,
set the picture frame so as to attain the positions shown in the
following figure when shooting the 9 colors chart.
set the picture frame so as to attain the positions shown in the
following figure when shooting the 9 colors chart.
Check on the oscilloscope
Measurement Point: Video terminal of USB, A/V, DC IN cable for
multi-use terminal (75
Ω terminated)
1. Horizontal period
Fig. 6-1-16
2. Vertical period
Fig. 6-1-17
Check on the monitor TV or the LCD screen
Fig. 6-1-18
A
A
B
A = B
V
B
C
C
C =
B
3
Transparent window
Effective picture frame
A
A
B
Blue
C14
Magenta
White
Cyan
Red
Yellow
Green
W14
C
C
B
C =
A = B
C14: Filter for AWB 5800K adjustment
A
2
B
3
6-21
DSC-W110/W115_ADJ
At this time, the following message is displayed, and click the
[Yes] button if the check result display at the upper right of
Color Reproduction Check screen is OK, or the [No] button if
NG.
[Yes] button if the check result display at the upper right of
Color Reproduction Check screen is OK, or the [No] button if
NG.
6) Upon successful completion of “5. Color Reproduction Check”,
the following message is displayed. Change the chart in ac-
cordance with the message.
cordance with the message.
7) Click the [OK] button, and the items from “6. CCD White De-
fect Compensation Check” to “8. Release of Data Setting dur-
ing Camera Adj.” will be executed.
ing Camera Adj.” will be executed.
8) Upon successful completion of all items of the CAMERA
Adjustment 4, the following message is displayed. Click the
[OK] button.
[OK] button.
5.
CAMERA Adjustment 4
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. AWB 3200K-5800K Standard Data Input
4. AWB 3200K-5800K Check
5. Color Reproduction Check
6. CCD White Defect Compensation Check
7. CCD Black Defect Compensation Check
8. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting
3. AWB 3200K-5800K Standard Data Input
4. AWB 3200K-5800K Check
5. Color Reproduction Check
6. CCD White Defect Compensation Check
7. CCD Black Defect Compensation Check
8. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 4.
2) The Automatic Adjustment Program executes the “1. Data Set-
1) Click the [Start] button of the CAMERA Adjustment 4.
2) The Automatic Adjustment Program executes the “1. Data Set-
ting during Camera Adj.”.
3) Upon successful completion of “1. Data Setting during Cam-
era Adj.”, “2. Picture Frame Setting” is executed. The follow-
ing message is displayed, and then referring to Fig. 6-1-16 to
Fig. 6-1-18, set the subject and click the [OK] button.
ing message is displayed, and then referring to Fig. 6-1-16 to
Fig. 6-1-18, set the subject and click the [OK] button.
4) Click the [OK] button, and the “3. AWB 3200K-5800K Stan-
dard Data Input” and “4. AWB 3200K-5800K Check” will be
executed.
executed.
5) After that, “5. Color Reproduction Check” will be executed.
Upon completion of adjustment, the check result is displayed
on the Color Reproduction Check screen.
on the Color Reproduction Check screen.
6-22
DSC-W110/W115_ADJ
6.
CAMERA Adjustment 5
Note:
“CAMERA Adjustment 5” is available only once after the
power is turned on. If the adjustment is retried, turn off the
power and turn on again.
power is turned on. If the adjustment is retried, turn off the
power and turn on again.
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Check
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Strobe Check
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of CAMERA Adjustment 5.
2) The Automatic Adjustment Program executes the “1. Data
1) Click the [Start] button of CAMERA Adjustment 5.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “5. Preparing the Flash
Adjustment Box” (see page 6-7).)
ject in accordance with the message.
(For the Flash adjustment box, refer to “5. Preparing the Flash
Adjustment Box” (see page 6-7).)
4) Press the [OK] button, and the “2. Strobe Check” will be ex-
ecuted.
5) During execution of “2. Strobe Check”, the following mes-
sage is displayed. After checking the flashing of strobe light,
click the [OK] button.
click the [OK] button.
6) Upon successful completion of “2. Strobe Check”, “3.Release
of Data Setting during CAMERA Adj.” is executed.
7) Upon successful completion of all items of the CAMERA
Adjustment 5, the following message is displayed. Click the
[OK] button.
[OK] button.
7.
CAMERA Adjustment 6
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Auto Focus Illumination Check
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Auto Focus Illumination Check
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of CAMERA Adjustment 6.
2) The Automatic Adjustment Program executes the “1. Data
1) Click the [Start] button of CAMERA Adjustment 6.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “5. Preparing the Flash
Adjustment Box” (see page 6-7).)
ject in accordance with the message.
(For the Flash adjustment box, refer to “5. Preparing the Flash
Adjustment Box” (see page 6-7).)
4) Press the [OK] button, and the “2. Auto Focus Illumination
Check” will be executed.
5) Upon successful completion of the “2. Auto Focus Illumina-
tion Check”, the “3. Release of Data Setting during Camera
Adj.” will be executed successively.
Adj.” will be executed successively.
6) Upon successful completion of all items of the CAMERA
Adjustment 6, the following message is displayed. Click the
[OK] button.
[OK] button.
6-23
DSC-W110/W115_ADJ
1-7-2.
Adjustment Items of LCD System Adjustment
The adjustment items of LCD system adjustment are as listed in
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Button
Adjustment
Adjusting Address
Name
Signal
Page
Address
LCD
V-COM Adj.
11
60
0401
Adjustment White Balance Adj.
11
60
0362, 0363
Table 6-1-5
1-7.
LCD SYSTEM ADJUSTMENTS
1-7-1.
Function of Each Button on LCD System
Adjustment Screen
Adjustment Screen
Click the [LCD SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the “LCD SYSTEM ADJUSTMENT” screen in Fig.
6-1-19 will appear.
screen, and the “LCD SYSTEM ADJUSTMENT” screen in Fig.
6-1-19 will appear.
Fig. 6-1-19
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Start] button
“LCD Adjustment” starts.
“LCD Adjustment” starts.
3
[Reboot] button
When this button is clicked, the camera is rebooted.
When this button is clicked, the camera is rebooted.
3
2
1
Click on the first or last page to see other DSC-W110 / DSC-W115 (serv.man3) service manuals if exist.