Sony DSC-V3 (serv.man4) Service Manual ▷ View online
6-23
DSC-V3
10-2. CAMERA Adjustment 5
Note:
Note:
“CAMERA Adjustment 5” is available only once after the
power is turned on. If the adjustment is retried, turn off the
power and turn on again.
power is turned on. If the adjustment is retried, turn off the
power and turn on again.
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Adj.
3. AF Laser Output Adj.
4. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Strobe Adj.
3. AF Laser Output Adj.
4. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [CAMERA Adjustment 5 Start] button.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “3. Preparing the Flash
Adjustment Box” (see page 6-6).)
ject in accordance with the message.
(For the Flash adjustment box, refer to “3. Preparing the Flash
Adjustment Box” (see page 6-6).)
Fig. 6-1-56
4) Press the
[OK]
button, and the “2. Strobe Adj.” will be ex-
ecuted.
5) During execution of “2. Strobe Adj.”, the following message
is displayed. After checking the flashing of strobe light, click
the
the
[OK]
button. (This message is displayed 6 times during
execution of adjustment.)
Fig. 6-1-57
6) Upon successful completion of “2. Strobe Adj.”, “3. AF Laser
Output Adj.” will be executed. When the following message
appears, set reference data to page: 6F, address: 15 using the
SEUS operation screen, and then click the
appears, set reference data to page: 6F, address: 15 using the
SEUS operation screen, and then click the
[OK]
button. (For
the reference data, refer to “10-1. Get Reference Data”.)
Fig. 6-1-58
7) Upon successful completion of the “3. AF Laser Output Adj.”,
the “4. Release of Data Setting during Camera Adj.” will be
executed successively.
executed successively.
8) Upon successful completion of all items of the CAMERA
Adjustment 5, the following message is displayed. Click the
[OK]
button.
Fig. 6-1-59
Ver 1.1 2004. 10
6-24
DSC-V3
11. CAMERA Adjustment 6
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. AF Laser Axis Check
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. AF Laser Axis Check
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the
1) Click the
[CAMERA Adjustment 6 Start]
button.
2) The Automatic Adjustment Program executes the “1. Data Set-
ting during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “4. Preparing the Flash
Adjustment Box” (see page 6-6).)
ject in accordance with the message.
(For the Flash adjustment box, refer to “4. Preparing the Flash
Adjustment Box” (see page 6-6).)
Fig. 6-1-60
4) Click the
[OK]
button, and the “2. AF Laser Axis Check” will
be executed. The following message is displayed. Attach the
AF Laser axis frame on the monitor TV screen in accordance
with the message.
AF Laser axis frame on the monitor TV screen in accordance
with the message.
Fig. 6-1-61
5) If the
[OK]
button is clicked, the next message is displayed.
Check that all hologram patterns are within the inspection
frame.
frame.
Fig. 6-1-62
Fig. 6-1-63
6) If the
[OK]
button is clicked, the next message is displayed.
Check that all hologram patterns are not unfocused.
Fig. 6-1-64
7) Upon completion of “2. AF Laser Axis Check”, “3. Release of
Data Setting during Camera Adj.” is executed.
8) Upon successful completion of all items of the CAMERA
Adjustment 6, the following message is displayed. Click the
[OK]
button.
Fig. 6-1-65
Inspection frame
6-25
DSC-V3
1-5.
LCD SYSTEM ADJUSTMENTS
1-5-1.
Function of Each Button on LCD System
Adjustment Screen
Adjustment Screen
Click the
[LCD SYSTEM ADJUSTMENT]
button on the Main
Menu screen, and the “LCD SYSTEM ADJUSTMENT” screen in
Fig. 6-1-66 will appear.
Fig. 6-1-66 will appear.
Fig. 6-1-66
1
[To Menu]
button
The Main Menu screen comes back.
2
[LCD Adjustment Start]
button
“LCD Adjustment” starts.
3
[Reset]
button
This button functions same as the Reset button of the camera.
4
[Release Data Setting]
button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
4
3
2
1
1-5-2.
Adjustment Items of LCD System Adjustment
The adjustment items of LCD system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Table 6-1-4. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Button
Adjustment
Signal
Page
Address
Name
VCO adj.
8F
23
LCD
Contrast adj.
Arbitrary
8F
2C
Adjustment V-COM adj.
8F
24
White Balance adj.
8F
28, 2A
Table 6-1-4
6-26
DSC-V3
1-5-3.
Adjusting Method
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD Adj.
2. VCO Adj.
3. Contrast Adj.
4. V-COM Adj.
5. White Balance Adj.
6. Release of Data Setting during LCD Adj.
sequence]
1. Data Setting during LCD Adj.
2. VCO Adj.
3. Contrast Adj.
4. V-COM Adj.
5. White Balance Adj.
6. Release of Data Setting during LCD Adj.
[Adjusting method]
1) Click the
1) Click the
[LCD Adjustment Start]
button.
2) The Automatic Adjustment Program executes the items from
“1. Data Setting during LCD Adj.” to “3. Contrast Adj.”.
3) Upon successful completion of the “3. Contrast Adj.”, the fol-
lowing message is displayed during execution in “4. V-COM
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the
Adj.”. On the SEUS screen, operate the UP/DOWN key so
that the brightness of portions A and B on the LCD panel is
equal. After the adjustment, click the
[OK]
button.
Fig. 6-1-67
4) Upon completion of “4. V-COM Adj.”, “5. White Balance Adj.”
is executed. The following message is displayed, and then check
that LCD screen is not colored.
If colored, change the data of page: 8F, address: 28 and 2A on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
that LCD screen is not colored.
If colored, change the data of page: 8F, address: 28 and 2A on
the SEUS Operation screen to adjust so that the LCD screen is
not colored.
Fig. 6-1-68
5) If the
[OK]
button is clicked, “6. Release of Data Setting dur-
ing LCD Adj.” will be executed.
6) Upon successful completion of all items the LCD adjustment,
the following message is displayed. Click the
[OK]
button.
Fig. 6-1-69
SEUS operation screen
Fig. 6-1-70
Check on the LCD screen (V-COM Adj.)
Fig. 6-1-71
UP/DOWN key
A
A
A
A
B
B
B
B
Click on the first or last page to see other DSC-V3 (serv.man4) service manuals if exist.