Sony DSC-V3 (serv.man3) Service Manual ▷ View online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
Revision History
Revision History
Sony EMCS Co.
DSC-V3
Ver 1.1 2006.11
DIGITAL STILL CAMERA
2006K0500-1
© 2006.11
Published by Kohda TEC
9-876-762-41
DSC-V3
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
— 2 —
DSC-V3
SPECIFICATIONS
x
Camera
[System]
Image device
9.04 mm (1/1.8 type) color CCD
Primary color lter
Primary color lter
Total pixels number of camera
Approx. 7 410 000 pixels
Effective pixels number of camera
Approx. 7 201 000 pixels
Lens
Carl Zeiss Vario-Sonnar
4
4
× zoom lens
f = 7
− 28 mm (34 − 136 mm when
converted to a 35 mm still camera)
F2.8
F2.8
− 4.0
Exposure control
Automatic exposure, Shutter speed
priority, Aperture priority, Manual
exposure, Scene selection (7 modes)
priority, Aperture priority, Manual
exposure, Scene selection (7 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent, Flash,
One-push
Fluorescent, Incandescent, Flash,
One-push
File format (DCF compliant)
Still images: Exif Ver. 2.2 JPEG
compliant, RAW, TIFF, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
compliant, RAW, TIFF, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)
Recording media
Memory Stick
CompactFlash (Type I)
Flash
Recommended distance (ISO set to
Auto):
0.4 to 3 m (15 3/4 inches to 118 1/8
inches) (W)
0.4 to 2.5 m (15 3/4 inches to 98 1/2
inches) (T)
Auto):
0.4 to 3 m (15 3/4 inches to 118 1/8
inches) (W)
0.4 to 2.5 m (15 3/4 inches to 98 1/2
inches) (T)
[Input and Output connectors]
A/V OUT (MONO) jack (Monaural)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Ω, unbalanced,
sync negative
Audio: 327 mV (at a 47 k
Audio: 327 mV (at a 47 k
Ω load)
Output impedance 2.2 k
Ω
Accessory jack
Mini-minijack (
φ 2.5 mm)
USB jack
mini-B
USB communication
Hi-Speed USB (USB 2.0 compliant)
[LCD screen]
LCD panel
6.2 cm (2.5 type) TFT drive
Total number of dots
123 000 dots
[Power, general]
Used battery pack
NP-FR1
Power requirements
3.6 V
Power consumption (during shooting
with LCD screen on)
with LCD screen on)
1.53 W
Operating temperature
0
°C to +40°C (+32°F to +104°F)
Storage temperature
−20°C to +60°C (−4°F to +140°F)
Dimensions
119.8
×72.0×63 mm (4 3/4×2 7/8×2
1/2 inches) (W/H/D, excluding
maximum protrusions)
maximum protrusions)
Mass
410 g (14.5 oz) (including battery
pack NP-FR1, Memory Stick and
shoulder strap)
pack NP-FR1, Memory Stick and
shoulder strap)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching II
Compatible
PictBridge
Compatible
x
AC-LS5/LS5B AC Adaptor
Input rating
100 V to 240 V AC, 50/60 Hz, 11 W,
0.16 A to 0.09 A
0.16 A to 0.09 A
Output rating
4.2 V DC, 1.5 A
Operating temperature
0
°C to +40°C (+32°F to +104°F)
Storage temperature
−20°C to +60°C (−4°F to +140°F)
Dimensions
Approx. 48
×29×81 mm (1 15/16×1
3/16
×3 1/4 inches) (W/H/D,
excluding projecting parts)
Mass
Approx. 130 g (5 oz) excluding
power cord (mains lead)
power cord (mains lead)
x
NP-FR1 battery pack
Used battery
Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity
4.4 Wh (1220 mAh)
x
Accessories
• AC-LS5/LS5B AC Adaptor (1)
• Power cord (mains lead) (1)
• NP-FR1 battery pack (1)
• Battery case (1)
• USB cable (1)
• A/V connecting cable (1)
• Shoulder strap (1)
• CD-ROM (USB driver SPVD-012) (1)
• CD-ROM (Image Data Converter Ver.2.0) (1)
• Operating instructions (1)
• Power cord (mains lead) (1)
• NP-FR1 battery pack (1)
• Battery case (1)
• USB cable (1)
• A/V connecting cable (1)
• Shoulder strap (1)
• CD-ROM (USB driver SPVD-012) (1)
• CD-ROM (Image Data Converter Ver.2.0) (1)
• Operating instructions (1)
Design and speci cations are subject to change
without notice.
without notice.
See page 6
— 3 —
DSC-V3
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
— 4 —
DSC-V3
[Description on Self-diagnosis Display]
Self-diagnosis display
• C: ss: ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E: ss: ss
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
SELF-DIAGNOSIS FUNCTION
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the recording medium.
Insert a new recording midium.
Cause
Trouble with hardware.
Unformatted recording medium is inserted.
Recording medium is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR,
CF CARD ERROR
CF CARD ERROR
E:61:ss
E:91:ss
Checking of lens drive circuit.
When failed in the focus and zoom
initialization.
initialization.
Abnormality when flash is being
charged.
charged.
Checking of flash unit or replacement
of flash unit.
of flash unit.
—
Display