Sony DSC-U50 (serv.man3) Service Manual ▷ View online
32
,
Select [
BURST] or [
BURST] with the control
buttons
buttons
v
/
V
, then press EXEC.
The image size used for burst shooting is
set.
Press MENU so that the menu disappears
from the LCD screen.
set.
Press MENU so that the menu disappears
from the LCD screen.
•
For details on the image size, see page 19.
,
Press the shutter button
halfway down, then hold the
shutter button fully down.
halfway down, then hold the
shutter button fully down.
Up to two images are recorded with 2M or
up to ten images are recorded with VGA
while you hold down the shutter button.
up to ten images are recorded with VGA
while you hold down the shutter button.
•
If you release the shutter button in the middle of
shooting, shooting will stop at that point. Only
the images that were shot while the shutter
button was held down are recorded.
shooting, shooting will stop at that point. Only
the images that were shot while the shutter
button was held down are recorded.
3
SIZE • BURST
BURST
VGA
VGA
VGA
VGA
2M
BURST
VGA
VGA
VGA
2M
2M
2M
2M
2M
2M
EXEC
/
2M
2M
2M
VGA
VGA
VGA
4
2.0M
VGA
VGA
10
101
33
S
hoo
ting st
ill
im
ages
Adjusting color tones — White Balance
When the white balance is set to Auto, the
white balance function works
automatically, and the overall color balance
is adjusted according to the shooting
conditions. However, when you shoot
under fixed conditions or special lighting
conditions, you can manually adjust the
white balance.
white balance function works
automatically, and the overall color balance
is adjusted according to the shooting
conditions. However, when you shoot
under fixed conditions or special lighting
conditions, you can manually adjust the
white balance.
No indicator (Auto)
Adjusts the white balance automatically
(Daylight)
Shooting outdoors, shooting night scenes,
neon signs, fireworks or sunrises, or
shooting just before and after sundown
neon signs, fireworks or sunrises, or
shooting just before and after sundown
(Cloudy)
Shooting under a cloudy sky
(Fluorescent)
Shooting under fluorescent lighting
(Incandescent)
• Places where the lighting conditions
change quickly
• Under bright lighting such as
photography studios
,
Set the mode switch to
, and
turn on the power, then press
MENU.
MENU.
The menu appears on the LCD screen.
•
You can also carry out this operation when the
mode switch is set to
mode switch is set to
.
,
Select [
] with the control
button
v
, then press EXEC.
Select [WHITE BAL] with the
control button
control button
V
, then press
EXEC.
•
When the mode switch is set to
, select
[
] with the control button v.
•
Under fluorescent lights that flicker, the white
balance adjustment function may not work
correctly even though you select
balance adjustment function may not work
correctly even though you select
(fluorescent).
1
RETURN
FOCUS
SELFTIMER
WHITE BAL
SELFTIMER
WHITE BAL
AUTO
OFF
AUTO
SIZE BURST
•
2M
2M
2M
MENU
2
SIZE BURST
•
RETURN
FOCUS
SELFTIMER
WHITE BAL
SELFTIMER
WHITE BAL
AUTO
OFF
AUTO
2M
2M
2M
EXEC
/
34
,
Select the desired mode with
the control buttons
the control buttons
v
/
V
, then
press EXEC.
When you press MENU, the menu
disappears and the selected mode is
displayed on the LCD screen.
disappears and the selected mode is
displayed on the LCD screen.
To reactivate auto adjustment
Select [AUTO] in step 3.
•
When the flash strobes, the manual setting is
canceled, and the image is recorded in the Auto
mode.
canceled, and the image is recorded in the Auto
mode.
•
The mode you have selected here is maintained
even when the power is turned off.
even when the power is turned off.
z
Shooting techniques
The image is affected by the lighting
conditions. For example, the entire image
appears blue under sunlight in the summer,
and white items gain a reddish tint under
incandescent light bulbs, etc. The human
eye can resolve these problems, but digital
still cameras cannot recognize the correct
colors without adjustments.
Normally, the camera makes these
adjustments automatically, but if recorded
image colors appear unnatural, we
recommend that you adjust the white
balance.
conditions. For example, the entire image
appears blue under sunlight in the summer,
and white items gain a reddish tint under
incandescent light bulbs, etc. The human
eye can resolve these problems, but digital
still cameras cannot recognize the correct
colors without adjustments.
Normally, the camera makes these
adjustments automatically, but if recorded
image colors appear unnatural, we
recommend that you adjust the white
balance.
3
WHITE BALANCE
AUTO
EXEC
/
35
E
n
jo
y
in
g
s
til
l
ima
g
e
s
Viewing still images
on the LCD screen
on the LCD screen
You can view images shot with your camera
almost immediately on the LCD screen.
You can select the following two methods
for viewing images.
almost immediately on the LCD screen.
You can select the following two methods
for viewing images.
Single (single-image) screen
You can view one image at a time,
displayed over the entire screen.
displayed over the entire screen.
Index (four-image) screen
Four images are displayed simultaneously
in separate panels on the screen.
in separate panels on the screen.
•
For detailed descriptions of the screen
indicators, see page 87.
indicators, see page 87.
•
For details on viewing movies, see page 49.
7
/ 8
12:00
PM
101-0007
2003 7 4
2003 7 4
101
2M
2M
2M
Single (single-
image) screen
image) screen
Index (four-image)
screen
screen
Viewing single images
,
Set the mode switch to
, and
turn on the power.
The last image in the selected recording
folder (page 26) appears on the LCD
screen.
folder (page 26) appears on the LCD
screen.
,
Select the desired still image
with the control buttons
with the control buttons
v
/
V
.
v : To display the preceding image
V : To display the next image
V : To display the next image
1
12:00
PM
101-0007
2003 7 4
2003 7 4
7
/ 8
101
2M
2M
2M
2
10:30
AM
101-0006
2003 7 4
2003 7 4
6
/ 8
101
2M
2M
2M
Enjoying still images
Click on the first or last page to see other DSC-U50 (serv.man3) service manuals if exist.