Sony DSC-U50 (serv.man3) Service Manual ▷ View online
24
Selecting a flash mode
,
Set the mode switch to
, and
press the control button
v
( )
repeatedly to select a flash
mode.
mode.
Each time you press v ( ), the indicator
changes as follows.
changes as follows.
No indicator (Auto):
Based on the
lighting conditions, the camera will decide
if there is enough light, and will use the
flash accordingly.
if there is enough light, and will use the
flash accordingly.
(Red-eye reduction):
Flash mode is
set to Auto, and the red-eye reduction
operates if the flash strobes.
operates if the flash strobes.
(Forced flash):
The flash strobes
regardless of the surrounding brightness.
(No flash):
The flash does not strobe.
10
101
2M
2M
2M
•
You cannot use the flash in the Burst mode.
•
If the menu is currently displayed, press MENU
first so that the menu disappears.
first so that the menu disappears.
•
The recommended shooting distance using the
flash is approximately 0.5 m to 1.8 m (1 foot
7 3/4 inches to 5 feet 10 3/4 inches). The
recommended shooting distance for
flash is approximately 0.5 m to 1.8 m (1 foot
7 3/4 inches to 5 feet 10 3/4 inches). The
recommended shooting distance for
(Red-
eye reduction) is approximately 0.5 m to 1.5 m
(1 foot 7 3/4 inches to 4 feet 11 inches).
(1 foot 7 3/4 inches to 4 feet 11 inches).
•
When using the Auto,
(Red-eye reduction)
or
(Forced flash) mode, you may notice
some noise in the image when you look at the
LCD screen in a dark place, but this will have
no effect on the shot image.
LCD screen in a dark place, but this will have
no effect on the shot image.
•
While you are using
(No flash) mode, the
shutter speed is slower in a dark place. Be
careful not to allow your hand to shake while
holding the unit.
careful not to allow your hand to shake while
holding the unit.
•
While charging the flash, the
(
Flash charge)
lamp flashes. After the charging is complete,
the lamp goes out.
the lamp goes out.
•
This setting is maintained even when the power
is turned off.
is turned off.
Red-eye reduction
The flash pre-strobes before shooting to
reduce the red-eye phenomenon.
reduce the red-eye phenomenon.
•
Red-eye reduction may not produce the desired
effects depending on individual differences, the
distance to the subject, if the subject does not
see the pre-strobe, or other conditions.
effects depending on individual differences, the
distance to the subject, if the subject does not
see the pre-strobe, or other conditions.
25
S
hoo
ting st
ill
im
ages
Creating or
selecting a folder
selecting a folder
Your camera can create multiple folders in
a “Memory Stick Duo.” Also, you can
select the folder used to store images.
When not creating a new folder,
“101MSDCF” folder is selected as the
recording folder.
You can create folders up to “999MSDCF.”
a “Memory Stick Duo.” Also, you can
select the folder used to store images.
When not creating a new folder,
“101MSDCF” folder is selected as the
recording folder.
You can create folders up to “999MSDCF.”
•
Up to 4,000 images can be stored in one folder.
When the folder capacity is exceeded, a new
folder is automatically created.
When the folder capacity is exceeded, a new
folder is automatically created.
Creating a new folder
,
Set the mode switch to
, and
turn on the power, then press
MENU.
MENU.
The menu appears on the LCD screen.
•
You can also carry out this operation when the
mode switch is set to
mode switch is set to
.
•
You cannot specify the number of a new folder
that you create.
that you create.
1
RETURN
FOCUS
SELFTIMER
WHITE BAL
SELFTIMER
WHITE BAL
AUTO
OFF
AUTO
SIZE BURST
•
2M
2M
2M
MENU
,
Select [
] with the control
button
V
, then press EXEC.
Select [CREATE FOLDER] with
the control buttons
the control buttons
v
/
V
, then
press EXEC.
The CREATE REC. FOLDER screen
appears.
appears.
•
Once you create a new folder, you cannot delete
the new folder with the camera.
the new folder with the camera.
•
Images are recorded in the newly created folder
until a different folder is created or selected.
until a different folder is created or selected.
2
RETURN
FORMAT
CREATE FOLDER
CHANGE FOLDER
CREATE FOLDER
CHANGE FOLDER
101
EXEC
/
26
,
Select [OK] with the control
button
button
v
, then press EXEC.
A new folder is created with a number one
higher than the largest number in the
“Memory Stick Duo,” and the folder
becomes the recording folder.
When you press MENU, the menu
disappears and the created folder is
displayed.
higher than the largest number in the
“Memory Stick Duo,” and the folder
becomes the recording folder.
When you press MENU, the menu
disappears and the created folder is
displayed.
To cancel folder creation
Select [CANCEL] in step 3.
3
O K
C A N C E L
CREATE REC.FOLDER
102MSDCF
CREATING
EXEC
/
Selecting the recording folder
,
Set the mode switch to
,
then press MENU.
The menu appears on the LCD screen.
•
You can also carry out this operation when the
mode switch is set to
mode switch is set to
.
,
Select [
] with the control
button
V
, then press EXEC.
Select [CHANGE FOLDER]
with the control button
with the control button
V
, then
press EXEC.
The CHANGE REC. FOLDER screen
appears.
appears.
1
RETURN
FOCUS
SELFTIMER
WHITE BAL
SELFTIMER
WHITE BAL
AUTO
OFF
AUTO
SIZE BURST
•
2M
2M
2M
MENU
2
RETURN
FORMAT
CREATE FOLDER
CHANGE FOLDER
CREATE FOLDER
CHANGE FOLDER
101
EXEC
/
27
S
hoo
ting st
ill
im
ages
,
Select the desired folder with
the control buttons
the control buttons
v
/
V
, then
press EXEC.
•
You cannot select the “100MSDCF” folder as a
recording folder.
recording folder.
•
The image is stored in the newly selected
folder. You cannot move recorded images to a
different folder with this camera.
folder. You cannot move recorded images to a
different folder with this camera.
,
Select [OK] with the control
button
button
v
, then press EXEC.
When you press MENU, the menu
disappears and the selected folder is
displayed.
disappears and the selected folder is
displayed.
To cancel changing the recording
folder
folder
Select [CANCEL] in step 4.
3
CHANGE REC. FOLDER
: 102MSDCF
0
IMAGE
CREATED:
1:05
PM
2003 7 4
:
EXEC
/
4
O K
C A N C E L
CHANGE REC. FOLDER
: 102MSDCF
EXEC
/
Click on the first or last page to see other DSC-U50 (serv.man3) service manuals if exist.