DOWNLOAD Sony DSC-U50 (serv.man3) Service Manual ↓ Size: 2.53 MB | Pages: 95 in PDF or view online for FREE

Model
DSC-U50 (serv.man3)
Pages
95
Size
2.53 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 1
File
dsc-u50-sm3.pdf
Date

Sony DSC-U50 (serv.man3) Service Manual ▷ View online

20
Basic still image shooting — Using auto adjustment mode
,
Set the mode switch to 
, and 
turn on the power.
The name of the folder where the image will 
be recorded appears on the LCD screen for 
approximately five seconds.
[FOCUS] is set to [AUTO] at the factory.
The exposure is automatically adjusted.
This camera can create new folders and select 
folders to be stored in the “Memory Stick Duo” 
(page 25).
,
Hold the camera steadily with 
both hands and position the 
subject in the center of the LCD 
screen.
Do not cover the lens or flash with your 
fingers.
When recording outdoors during clear weather 
or under other intense light, undesired light 
(ghosting) may enter the screen. If this 
happens, shade the lens with your hand or other 
object while recording.
The exposure and focus are adjusted to the 
center of the LCD screen.
,
Press and hold the shutter 
button halfway down.
A beep sounds. When the AE/AF lock 
indicator changes from flashing to light-up, 
the camera is ready for shooting.
If you release the shutter button, the recording 
will be canceled.
When the camera does not beep, the AF 
adjustment is not complete. You can continue to 
shoot, but the focus is not adjusted properly.
This camera employs an auto-macro AF 
function. The minimum focal distance to the 
subject is 10 cm (4 inches).
1
2
3
10
101
2M
2M
2M
AE/AF lock 
indicator
Flashes green
t
 Lights up
21
S
hoo
ting st
ill
 im
ages
,
Press the shutter button fully 
down.
A beep sounds. When “RECORDING” 
disappears from the LCD screen, recording 
is complete. The image will be recorded in 
the “Memory Stick Duo,” and you can 
shoot the next image.
If you do not operate the camera for about three 
minutes during recording or playback, the 
camera turns off automatically to prevent 
wearing down the batteries (page 15). 
Auto Focus
When you try to shoot a subject that is 
difficult to focus on, the AE/AF lock 
indicator changes to flashing slowly.
The Auto Focus function may have 
difficulty working under the following 
conditions. In such cases, release the shutter 
button, then recompose the shot and focus 
again. If the Auto Focus function can still 
not bring the subject into focus, use the 
Focus preset function (page 30).
The subject is distant from the camera and dark.
The contrast between the subject and its 
background is poor.
The subject is seen through glass, such as a 
window.
A fast-moving subject.
The subject reflects or has a lustrous finish, 
such as a mirror or a luminous body.
A flashing subject.
A backlit subject.
LCD light
You can use [LCD LIGHT] under 
 
[
]
 
with MENU and the control buttons v/V to 
turn the LCD light on and off. This is useful 
for extending the battery life.
We recommend that you set [LCD LIGHT] 
to [OFF] when using alkaline batteries.
This camera is equipped with a Hybrid-type 
LCD screen that allows you to see the LCD 
screen even when the LCD light is turned off, 
as long as there is some ambient illumination.
Even if the LCD light setting is [OFF], the LCD 
light will turn on when menu operations are 
being performed. When the menu operation is 
completed, the LCD light will turn off again.
4
2M
2M
2M
22
LCD screen display during 
shooting
You can use [DISPLAY] under 
 
[
]
 with 
MENU and the control buttons v/V to turn 
the display on and off. This is useful when 
recording under conditions where it is 
difficult to check the image on the LCD 
screen.
For detailed descriptions of the indicators, see 
page 86.
Indicators on the LCD screen are not recorded.
Using the self-timer
,
Set the mode switch to 
, and 
press MENU.
The menu appears on the LCD screen.
You can also carry out this operation when the 
mode switch is set to 
.
,
Select [
] with the control 
button 
v
, then press EXEC. 
Select [SELFTIMER] with the 
control buttons 
v
/
V
, then 
press EXEC.
When the mode switch is set to 
, select 
[
] with the control button v.
2M
2M
2M
10
101
When [DISPLAY] is [OFF]
Warning messages, etc. are displayed.
When [DISPLAY] is [ON]
All indicators are displayed.
1
RETURN
FOCUS
SELFTIMER
WHITE BAL
AUTO
OFF
AUTO
SIZE BURST
2M
2M
2M
MENU
2
SIZE BURST
RETURN
FOCUS
SELFTIMER
WHITE BAL
AUTO
OFF
AUTO
2M
2M
2M
EXEC
/
23
S
hoo
ting st
ill
 im
ages
,
Select [ON] with the control 
button 
v
, then press EXEC.
When you press MENU, the menu 
disappears and the 
 (self-timer) indicator 
appears on the LCD screen.
,
Center the subject in the LCD 
screen and press the shutter 
button fully down.
The self-timer lamp flashes red and a 
continuous beep sounds. The image will be 
shot after approximately 10 seconds.
To cancel the self-timer in the middle 
of the operation
Press POWER to turn off the power.
If you press the shutter button while standing in 
front of the camera, the focus and the exposure 
may not be correctly set.
3
10
101
SELFTIMER
O N
O F F
2M
2M
2M
EXEC
/
4
10
101
2M
2M
2M
Self-timer 
lamp
Rotating the lens
,
Adjust the lens section angle.
You can rotate the lens section up to 120 
degrees frontward. When shooting in mirror 
mode, you can rotate it up to 90 degrees 
backwards.
When shooting in mirror mode, the image 
on the LCD screen is a mirror-image. 
However, the image will be normal when 
recorded.
When you look at an image recorded in mirror 
mode on your computer, the image may be 
displayed inverted by 180 degrees, depending 
on the software you use (page 72).
Shooting in 
mirror mode
Image on the 
LCD screen
Recorded image
Page of 95
Display

Click on the first or last page to see other DSC-U50 (serv.man3) service manuals if exist.