Sony DSC-U20 (serv.man3) Service Manual ▷ View online
73
Co
py
ing
py
ing
ima
g
e
s
When a removable disk icon is not
shown
shown
1
Right-click [My Computer], then click [Properties].
The “System Properties” screen appears.
• When using Windows 2000, click [Hardware] on
The “System Properties” screen appears.
• When using Windows 2000, click [Hardware] on
the “System Properties” screen.
2
Confirm if other devices are already installed.
1
1
Click [Device Manager].
2
Double-click [
Other Devices].
3
Confirm if there is a “
Sony DSC” or “
Sony Handycam” with a
mark.
3
If you find either of the devices above, follow the
steps below to delete them.
1
steps below to delete them.
1
Click [
Sony DSC] or [
Sony Handycam].
2
Click [Remove]. (When using Windows 2000,
click [Uninstall].)
The “Confirm Device Removal” screen appears.
click [Uninstall].)
The “Confirm Device Removal” screen appears.
3
Click [OK].
The device is deleted.
The device is deleted.
Try the USB driver installation again using the supplied
CD-ROM (page 59).
CD-ROM (page 59).
74
4
Copying images
Copying images using “Image Transfer”
a
Connect the camera and your computer
with a USB cable (page 69).
with a USB cable (page 69).
When the USB connection is made, “Image
Transfer” and the OS AutoPlay Wizard both
activate. To set the system so that the OS AutoPlay
Wizard does not activate, continue and follow the
procedure below to cancel the setting.
Transfer” and the OS AutoPlay Wizard both
activate. To set the system so that the OS AutoPlay
Wizard does not activate, continue and follow the
procedure below to cancel the setting.
b
Click [Start], then click [My Computer].
c
Right-click [Sony MemoryStick], then
click [Properties].
click [Properties].
d
Cancel the setting.
1
Click [AutoPlay].
2
Set [Content type] to [Pictures].
3
Check [Select an action to perform] under
[Actions], select [Take no action], then click
[Apply].
[Actions], select [Take no action], then click
[Apply].
4
Set [Content type] to [Video files] and [Mixed
content] in step 2, and repeat step 3.
content] in step 2, and repeat step 3.
5
Click [OK].
The [Properties] screen closes.
The [Properties] screen closes.
• The OS AutoPlay Wizard does not activate
automatically the next time the USB connection is
made.
made.
75
Co
py
ing
py
ing
ima
g
e
s
Copying images using the Windows XP
OS AutoPlay Wizard
OS AutoPlay Wizard
a
Connect the camera and your computer
with a USB cable (page 69).
with a USB cable (page 69).
b
Click [Copy pictures to a folder on my
computer using Microsoft Scanner and
Camera Wizard], then click [OK].
computer using Microsoft Scanner and
Camera Wizard], then click [OK].
The “Scanner and Camera Wizard” screen
appears.
appears.
c
Click [Next].
The images stored on the “Memory Stick” are
displayed.
displayed.
d
Click the checkbox of images that you
do not want to copy to your computer
and remove the checkmark, then click
[Next].
do not want to copy to your computer
and remove the checkmark, then click
[Next].
The “Picture Name and Destination” screen
appears.
appears.
e
Specify the image group names to be
copied and the copy destination, then
click [Next].
copied and the copy destination, then
click [Next].
Image copying starts. When the copying is
completed, the “Other Options” screen appears.
completed, the “Other Options” screen appears.
f
Select [Nothing. I’m finished working
with these pictures], then click [Next].
with these pictures], then click [Next].
The “Completing the Scanner and Camera
Wizard” screen appears.
Wizard” screen appears.
g
Click [Finish].
The wizard closes.
• To continue copying other images, follow the
• To continue copying other images, follow the
procedure on page 70 to disconnect the USB
cable and reconnect it. Then, perform the
procedure from step 1 again.
cable and reconnect it. Then, perform the
procedure from step 1 again.
76
Changing “Image Transfer” settings
You can change “Image Transfer” settings. Right-click
the “Image Transfer” icon on the task tray, select [Open
Settings]. The settings you can set are as follows:
[Basic], [Copy], and [Delete].
the “Image Transfer” icon on the task tray, select [Open
Settings]. The settings you can set are as follows:
[Basic], [Copy], and [Delete].
When the “Image Transfer” starts, the below window
appears.
appears.
When you select [Settings] from the above window,
you can only change the [Basic] setting.
you can only change the [Basic] setting.
Right-click here
Click on the first or last page to see other DSC-U20 (serv.man3) service manuals if exist.