Sony DSC-T77 (serv.man2) Service Manual ▷ View online
DSC-T77_L2
HELP
BT Hinge Shaft (210)
BT Hinge Shaft (210)
BT Hinge
Shaft (210)
Shaft (210)
BT Hinge
Shaft (210)
Shaft (210)
1.3 mm within
1.3 mm within
BT Lid Assy (210)
Set
BT Lid Assy (210)
Press the flat surface.
(Do not press the other.)
(Do not press the other.)
Press the flat surface.
(Do not press the other.)
(Do not press the other.)
In the condition BT lid assy (210) has removed from the set surely,
insert BT hinge shaft (210).
insert BT hinge shaft (210).
BT Lid Assy (210)
Do not touch the tip
of BT hinge plate.
of BT hinge plate.
In case of BT hinge shaft (210) is coming out, insert it with care of followings.
NOTES ON ATTACHING BT HINGE SHAFT (210)
HELP13
DSC-T77_L2
HELP
Claw A
Control Switch Block
(RL61210)
(RL61210)
Front Block
Cabinet Rear Block
Claw A
Spot-welded point
Bend Claw A to the spot-welded point
in the arrow direction.
in the arrow direction.
Bend Claw B to the edge of Cabinet Rear
Block in the arrow direction.
Block in the arrow direction.
Claw B
In case of assembling front block, bend two claws on the cabinet rear block as shown below.
(Once front block is removed causes the engagement of two claws on the cabinet rear block and two bosses
on the control switch block (RL61210) becomes loose.)
(Once front block is removed causes the engagement of two claws on the cabinet rear block and two bosses
on the control switch block (RL61210) becomes loose.)
NOTES ON ASSEMBILING FRONT BLOCK
Boss
Boss
Claw B
Edge of Cabinet Rear Block
HELP14
DSC-T77_L2
HELP
RADIATION SHEET (K)
PUTTING POSITION
PUTTING POSITION
0 3mm
Radiation Sheet (K)
HELP15
DSC-T77_L2
Link
Link
3. BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM (2/2)
OVERALL BLOCK DIAGRAM (1/2)
POWER BLOCK DIAGRAM (1/2)
POWER BLOCK DIAGRAM (2/2)
Click on the first or last page to see other DSC-T77 (serv.man2) service manuals if exist.