Sony DSC-QX100 Service Manual ▷ View online
DSC-QX100
4-12
19. Match the marks of the Cam Tube and the Linear Guide Tube (B).
20. Detach the Linear Guide Tube (B) from the Cam Tube.
20. Detach the Linear Guide Tube (B) from the Cam Tube.
Cam Tube
Cam Tube
Linear Guide Tube (B)
Linear Guide Tube (B)
17. Set the mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
18. Remove the 3 Group Frame Block Assy and the 2 Group Frame Block Assy.
18. Remove the 3 Group Frame Block Assy and the 2 Group Frame Block Assy.
2 Group Frame Block Assy
3 Group Frame Block Assy
Linear Guide Tube (B)
Cam Tube
15. Turn the Cam Tube in the arrow direction to detach the 1 Group Frame Block Assy and Straight Tube (A) Block Assy.
16. Detach the 1 Group Frame Block Assy from the Straight Tube (A) Block Assy.
16. Detach the 1 Group Frame Block Assy from the Straight Tube (A) Block Assy.
1 Group Frame Block Assy,
Straight Tube (A) Block Assy
Straight Tube (A) Block Assy
Straight Tube (A)
Block Assy
Block Assy
1 Group Frame
Block Assy
Block Assy
Cam Tube
Mark
Mark
Mark
DSC-QX100
4-13
Linear Guide Tube (B)
Cam Tube
CAV No.
Linear Guide Tube (B)
Installation
1. While matching the marks of the Linear Guide Tube (B) and the Cam Tube, assemble these parts.
1. While matching the marks of the Linear Guide Tube (B) and the Cam Tube, assemble these parts.
2. Set the mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
3. Install the 2 Group Frame Block Assy at a position where the mark of the Linear Guide Tube (B) matches CAV No. of
the 2 Group Frame Block Assy.
4. Install the 3 Group Frame Block Assy at a position where the mark of the Linear Guide Tube (B) matches the hole of the
3 Group Frame Block Assy.
3. Install the 2 Group Frame Block Assy at a position where the mark of the Linear Guide Tube (B) matches CAV No. of
the 2 Group Frame Block Assy.
4. Install the 3 Group Frame Block Assy at a position where the mark of the Linear Guide Tube (B) matches the hole of the
3 Group Frame Block Assy.
5. Set the mark of the Linear Guide Tube (B) at the first gear tooth of the Cam Tube.
6. Match the mark of the Cam Tube with the concave portion of the 1 Group Frame Block Assy.
7. Install the Cam Tube to the 1 Group Frame Block Assy, and turn the Cam Tube.
6. Match the mark of the Cam Tube with the concave portion of the 1 Group Frame Block Assy.
7. Install the Cam Tube to the 1 Group Frame Block Assy, and turn the Cam Tube.
2 Group Frame Block Assy
3 Group Frame Block Assy
1 Group Frame
Block Assy
Block Assy
Cam Tube
Cam Tube
Cam Tube
Linear Guide Tube (B)
Cam Tube
Linear Guide Tube (B)
Mark
Mark
Concave
portion
portion
Mark
Mark
Hole
DSC-QX100
4-14
8.
9.
10. Turn the Cam Tube counterclockwise to the maximum extent.
11.
12. Check that the five Helicoids are engaged with the grooves.
Cam Tube
Straight Tube (A)
Block Assy
Block Assy
Stationary Tube
Near the
Naruto Gear
Naruto Gear
Concave
portion
portion
CAV No.
Straight Tube (A)
Block Assy
Block Assy
Match CAV No. inside the Straight Tube (A) Block Assy with the concave portion of the 1 Group Frame
Block Assy.
Block Assy.
Push the Straight Tube (A) Block Assy in the arrow direction with the Cam Tube turned clockwise to the
maximum extent.
maximum extent.
While matching the Helicoid near the mark with the groove near the Naruto Gear of the Stationary
Tube, assemble the Stationary Tube.
Tube, assemble the Stationary Tube.
Helicoid
Groove
Mark
DSC-QX100
4-15
13. Install the Naruto Gear.
14. Turn the Naruto Gear in the arrow direction to extend the Lens Barrel to the center of TELE and WIDE.
14. Turn the Naruto Gear in the arrow direction to extend the Lens Barrel to the center of TELE and WIDE.
15. Pull the flexible boards out of the Lens Barrel and fix the flexible boards with the boss and the ribs.
16. Turn the Naruto Gear in the arrow direction to return the lens to the previous position.
16. Turn the Naruto Gear in the arrow direction to return the lens to the previous position.
17. Install the LF-2049 Flexible Boards.
18. Connect the two flexible boards to the connectors.
18. Connect the two flexible boards to the connectors.
19. Install the Rear Tube Mirror Block.
20. Connect the flexible board (focus) to the connector.
20. Connect the flexible board (focus) to the connector.
Rear Tube Mirror Block
Flexible board (focus)
LF-2049 Flexible Board
Boss
Rib
Rib
Rib
Rib
Rib
Rear Tube Mirror Block
Naruto Gear
Naruto Gear
Naruto Gear
Flexible
boards
boards
Hook
Boss
Connectors
Flexible
boards
boards
Connector
Click on the first or last page to see other DSC-QX100 service manuals if exist.