Sony DSC-P2 (serv.man3) Service Manual ▷ View online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver 1.0 2002. 05
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
US Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
DIGITAL STILL CAMERA
DSC-P2
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
DSC-P2
SPECIFICATIONS
COVER
COVER
System
Image device 6.64 mm (1/2.7 type) color
CCD
Primary color filter
Primary color filter
Total pixels number of camera
Approx. 2 110 000 pixels
Lens
3
×
zoom lens
f=6
−
18.0 mm (
1
/
4
−
23
/
32
inches)
(35 mm camera conversion: 39 to
117mm (1
117mm (1
17
/
32
−
4
19
/
32
inches))
F2.8
−
5.6
Camera
Effective pixels number of camera
Approx. 1 980 000 pixels
Exposure control
Automatic,
Scene selection (three modes)
Scene selection (three modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent
Fluorescent, Incandescent
File format
Still images: DCF conformity
(Exif Ver . 2.2, JPEG conformity
GIF at Clip Motion)
DPOF correspondence
Movies: MPEG1 conformity
(Monaural)
Audio with still image: MPEG1
conformity (Monaural)
(Exif Ver . 2.2, JPEG conformity
GIF at Clip Motion)
DPOF correspondence
Movies: MPEG1 conformity
(Monaural)
Audio with still image: MPEG1
conformity (Monaural)
Recording media
“Memory Stick”
Flash
Recommended distance
0.5 to 3.8 m (1.6 to 12.5 ft) (W)
0.5 to 2.4 m (1.6 to 7.9 ft) (T)
(when ISO sensitivity is set to Auto)
0.5 to 3.8 m (1.6 to 12.5 ft) (W)
0.5 to 2.4 m (1.6 to 7.9 ft) (T)
(when ISO sensitivity is set to Auto)
Output connectors
A/V OUT (MONO) jack
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Ω
, unbalanced,
sync negative
Audio: 327 mV (at a 47 k
Audio: 327 mV (at a 47 k
Ω
load)
Output impedance 2.2 k
Ω
USB jack
mini-B
LCD screen
LCD panel used
3.8 cm (1.5 type) TFT drive
Total number of dots
123 200 (560
×
220 ) dots
Power, general
Used battery pack
NP-FC10
Power requirements
3.6 V
Power consumption (when shooting)
1.7W
Operating temperature range
0
°
to
+
40
°
C (32
°
to
+
104
°
F)
Storage temperature range
−
20
°
to
+
60
°
C (
−
4
°
to
+
140
°
F)
Dimensions
114
×
51.5
×
35.6
mm
(4
1
/
2
×
2
×
1
13
/
32
inches)
(W/H/D, protruding portions not
included)
included)
Mass
206 g (7 oz) (NP-FC10 battery pack,
“Memory Stick” and wrist strap
included)
“Memory Stick” and wrist strap
included)
Microphone
Electret condenser microphone
Speaker
Dynamic speaker
AC-LS1A AC power adaptor
Power requirements
AC 100 – 240 V, 50/60 Hz
Rated output voltage
DC 4.2 V, 1.5 A
Operating temperature range
0
°
to
+
40
°
C (32
°
to
+
104
°
F)
Storage temperature range
−
20
°
to
+
60
°
C (
−
4
°
to
+
140
°
F)
Dimensions
105
×
36
×
56
mm
(4
1
/
4
×
1
7
/
16
×
2
1
/
4
inches) (W/H/D, protruding
parts not included)
Mass
Approx. 180 g (6 oz)
(adaptor only)
(adaptor only)
NP-FC10 battery pack
Used battery Lithium ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity
2.4 Wh (675 mAh)
Accessories
• A/V connecting cable (1)
• NP-FC10 battery pack (1)
• AC-LS1A AC power adaptor (1)
• Power cord (mains lead) (1)
• USB cable (1)
• Wrist strap (1)
• “Memory Stick” (16MB) (1)
• CD-ROM (USB driver: SPVD-008) (1)
• Operating Instructions (1)
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DSC-P2
SELF-DIAGNOSIS FUNCTION
COVER
COVER
[Description on Self-diagnosis Display]
Self-diagnosis display
• C: ss: ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E: ss: ss
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory stick”.
Insert a new “Memory Stick”.
Cause
Trouble with hardware.
Unformatted memory stick is inserted.
Memory stick is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:ss
E:91:ss
Checking of lens drive circuit.
When failed in the focus and zoom
initialization.
initialization.
Abnormality when flash is being
charged.
charged.
Checking of flash unit or replacement
of flash unit.
of flash unit.
—
1. MAIN PARTS
DSC-P2
— 4 —
1. ORNAMENTAL PARTS
Note:
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The parts numbers of such as a cabinet are also appeared in this section.
Refer to the parts number mentioned below the name of parts to order.
• Glossless black, cosmic blue and glossy black models are only for Japanese.
• Abbreviation
• Abbreviation
AUS : Australian model
CH : Chinese model
CH : Chinese model
The components identified by mark
0
or dotted
line with mark
0
are critical for safety.
Replace only with part number specified.
COVER
COVER
Sony EMCS Co.
2002E0500-1
©2002.5
Published by DI Customer Center
9-929-974-41
A/V connecting cable (1)
1-824-111-11
1-824-111-11
Checking supplied accessories.
Wrist strap (1)
3-076-646-01
CD-ROM
(SPVD-008 USB driver) (1)
3-072-414-01 (EXCEPT US, J)
3-072-654-01 (US, J)
(SPVD-008 USB driver) (1)
3-072-414-01 (EXCEPT US, J)
3-072-654-01 (US, J)
USB cable (1)
1-823-932-11
1-823-932-11
Power cord (1)
0
1-575-131-11 (AEP, E)
0
1-696-819-11 (AUS)
0
1-696-819-21 (AUS)
0
1-769-608-11 (AEP, E)
0
1-776-985-11 (KR)
0
1-782-476-11 (CH)
0
1-783-374-11 (UK, HK)
0
1-790-107-22 (US)
0
1-790-732-11 (JE, J)
AC adaptor
AC-LS1 (1)
AC-LS1 (1)
0
1-476-332-13 (US, JE, J)
0
1-476-332-23 (CH)
0
1-476-332-33 (KR)
0
1-476-332-43
(AEP, UK, E, AUS, HK)
"Memory Stick" (16MB) (1)
Other accessories
0 1-569-007-11 ADAPTOR, CONVERSION (E, JE)
0 1-569-008-21 ADAPTOR, CONVERSION 2P (E)
0 1-569-008-21 ADAPTOR, CONVERSION 2P (E)
3-065-665-01 MANUAL, INSTRUCTION (JAPANESE) (J)
3-075-509-01 MANUAL, INSTRUCTION (JAPANESE) (J)
3-075-509-11 MANUAL, INSTRUCTION (ENGLISH)
3-075-509-01 MANUAL, INSTRUCTION (JAPANESE) (J)
3-075-509-11 MANUAL, INSTRUCTION (ENGLISH)
(US, AEP, UK, E, AUS, CH, HK, JE)
3-075-509-21 MANUAL, INSTRUCTION (FRENCH, GERMAN)
(AEP)
3-075-509-31 MANUAL, INSTRUCTION
(SPANISH, PORTUGUESE) (AEP, E, JE)
3-075-509-41 MANUAL, INSTRUCTION (ITALIAN, DUTCH)
(AEP)
3-075-509-51 MANUAL, INSTRUCTION
(TRADITIONAL CHINESE,
SIMPLIFIED CHINESE)
(E, CH, HK, JE)
3-075-509-61 MANUAL, INSTRUCTION
(RUSSIAN, SWEDISH) (AEP)
3-075-509-71 MANUAL, INSTRUCTION (ARABIC) (E)
3-075-509-81 MANUAL, INSTRUCTION (KOREAN) (KR)
3-075-509-81 MANUAL, INSTRUCTION (KOREAN) (KR)
3-075-510-01 MANUAL, INSTRUCTION (JAPANESE) (J)
NC-NF10 battery pack (1)
3-070-841-01
HK : Hong Kong model
KR
KR
: Korean model
JE
: Tourist model
J
: Japanese model
DC cover
3-075-831-11 (SILVER)
3-075-831-11 (SILVER)
3-075-831-21 (WHITE)
3-075-831-31 (BLUE)
3-075-831-41 (PINK)
3-075-831-51 (GLOSSY BLACK) (J)
3-075-831-61 (COSMIC BLUE) (J)
3-075-831-71 (GLOSSLESS BLACK) (J)
(When change it, need dismantle the set.)
3-075-831-61 (COSMIC BLUE) (J)
3-075-831-71 (GLOSSLESS BLACK) (J)
(When change it, need dismantle the set.)
LCD window
3-075-821-01
3-075-821-01
Adhesive sheet (1.5)
3-075-822-01
3-075-822-01
CPC lid
3-064-225-01
3-064-225-01
(SILVER, BLUE,
WHITE, PINK)
WHITE, PINK)
3-064-225-11
(COSMIC BLUE,
GLOSSY BLACK,
GLOSSLESS BLACK) (J)
GLOSSY BLACK,
GLOSSLESS BLACK) (J)