Sony DSC-P200 (serv.man14) Service Manual ▷ View online
Auto-ADJ
SERVICE MANUAL
DSC-P200
Ver 1.1 2005.11
Sony EMCS Co.
9-876-854-91
2005K0500-1
© 2005.11
Published by DI Technical Support Department
CORRECTION-1
We will inform you that there are printing errors
in the service manual previously issued.
• Correction of the Before starting adjustment
• Correction of the Table 6-1-1
• Correction of the Table 6-1-1
DSC-P200
— 2 —
DSC-P200
!
: Points deleted portion.
SECTION 6
ADJUSTMENTS
Before starting adjustment
(Service Manual Page 6-1)
(The same model of the same destination)
(Machine to be repaired)
PC
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked.)
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 when replacing board.
Perform either procedure 1 or procedure 2 when replacing board.
PC
Procedure 2
When the data cannot be saved due to defective flash memory, or when the flash memory cannot be removed or
installed, save the data from the same model of the same destination, and download it.
installed, save the data from the same model of the same destination, and download it.
PC
Save the EVR data
to a personal computer.
to a personal computer.
Download the saved
data to a machine.
data to a machine.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a board
is replaced.
is replaced.
(Machine after a board is replaced)
(Machine before starting repair)
Download the data.
Save the data.
(Machine to be repaired)
^
— 3 —
DSC-P200
Precaution on Replacing the SY-123 board
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform the adjustment items necessary after SY Board replacement.
&
: Points added portion.
+
— 4 —
DSC-P200
!
: Points deleted portion.
@
1-1. Adjusting items when replacing main parts and boards
(Service Manual Page 6-2)
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data”. Perform it manually.
Note 2:
Use the Color Adjustment Program (P200Adjustment.exe).
Table 6-1-1
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
Back light unit
(CCD imager)
(AF illumination LED)
(T
iming gen., CCD signal process)
(Camera DSP)
(V
ideo amp.)
(LCD dri
v
er)
LCD901
D901
IC101
D104
IC101
IC301
IC302
IC801
(COMPLETE)
(COMPLETE)
(COMPLETE)
Lens block
Flash unit
LCD block
LCD block
CD-517 board
CD-517 board
CH-146 board
SY
-123 board
SY
-123 board
SY
-123 board
CD-517 board
CH-146 board
SY
-123 board
(Note 1)
Initialization of data
z
VIDEO adjustment
Video output level adj.
z
z
z
CAMERA adjustment 1
Flange back adj.
z
z
z
z
CAMERA adjustment 2
Flange back check
z
z
z
z
(Note 2)
Color shading adj.
z
z
z
z
z
z
F No. compensation
Mechanical shutter adj.
Measure gain adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z
z
z
z
z
z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
Strobe adj.
Auto focus illumination check
VCO adj.
Contrast adj.
V-COM adj.
White Balance adj.
z
CAMERA adjustment 4
CAMERA adjustment 3
z
z
z
z
CAMERA adjustment 5
z
z
z
z
z
z
LCD adjustment
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Display
