DOWNLOAD Sony DSC-HX60 / DSC-HX60V Service Manual ↓ Size: 6.63 MB | Pages: 46 in PDF or view online for FREE

DSC-HX60/HX60V

4-9

Installation
1.   Fit the four claws and attach the Barrier Assy.

 

Claws

Barrier Assy

Barrier Assy

2.   Attach two Barrier Tapes so that the end of each tape comes to the dent.

Note: Attach Barrier Tapes carefully so that they do not wrinkle.

3.   Attach the Ornamental Ring A and push it gently.

 

Ornamental Ring A

Barrier Tapes

Barrier Tapes

DSC-HX60/HX60V

4-10

Removal
1.   Release the claw to detach the Z Retainer.
2.   Release the boss and the claw to detach the FG Retainer.
3.   Release the claw to detach the FPC Retainer.

 

Claw

Claw

Boss

FG Retainer

FPC Retainer

Z Retainer

Claw

4.   Unsolder the DC Motor Worm Assy at two locations shown below.
5.   Disconnect the flexible board from the connector on the LF-2038 Flexible Board.

 

Solders

Connector

Disconnect the flexible board.

DC Motor Worm Assy

LF-2038 Flexible Board

6.   Disconnect the three sensors on the LF-2038 Flexible Board.
7.   Remove the five screws to detach the Rear Lens Assy.

 

Sensor

Screws

LF-2038 Flexible Board

Screws

Sensors

Rear Lens Assy

DSC-HX60/HX60V

4-11

8.   Remove the Gear B.
9.   Remove the Gear A.
10.  Remove the Gear WH.
11.  Remove the two screws to detach the DC Motor Worm Assy.

 

Screws

DC Motor Worm Assy

Gear B

Gear A

Gear WH

12.  Insert the Gear B and turn it clockwise to set the lens unit in the TELE end state.

Note: Turn the Gear B to the maximum.

13.  Release the flexible board from the boss and pull the Flexible Board out of the hole.

 

Boss

Flexible Board

Hole

Flexible Board

Gear B

DSC-HX60/HX60V

4-12

14.  Turn the Gear B counterclockwise to set the lens unit in the retracted state, and then remove the Gear B.

Note: Turn the Gear B to the maximum.

 

Gear B

Gear B

15.  Remove the 3 Group Frame Block Assy and the Core Unit_1 from the Fixed Barrel.

 

3 Group Frame Block Assy

Core Unit_1

Fixed Barrel 
Core Unit_1

Fixed Barrel