Sony DSC-F828 (serv.man3) Service Manual ▷ View online
90
g
Press MENU.
h
Select [OK] with
B
, then press
the center of the multi-
selector.
selector.
The - mark turns white and the
selected image is protected.
selected image is protected.
To cancel the protection
In Step 4, select [Cancel], or in Step 8,
select [Exit].
select [Exit].
To release protection
In Step 5, select an image for which you
want to release protection with v/V/b/B
and press the center of the multi-selector.
The - mark turns gray and repeat this
operation for all the images for which you
want to release protection. Then, press
MENU, select [OK], and press the center of
the multi-selector.
want to release protection with v/V/b/B
and press the center of the multi-selector.
The - mark turns gray and repeat this
operation for all the images for which you
want to release protection. Then, press
MENU, select [OK], and press the center of
the multi-selector.
To protect all the images in the
folder
folder
In Step 4, select [All In This Folder], then
press the center of the multi-selector. Next,
select [On], then press the center.
press the center of the multi-selector. Next,
select [On], then press the center.
To release protection of all the
images in the folder
images in the folder
In Step 4, select [All In This Folder], and
press the center of the multi-selector. Then
select [Off], and press the center.
press the center of the multi-selector. Then
select [Off], and press the center.
Changing image size
– Resize
Mode dial:
You can change the image size of a
recorded image, and save it as a new file.
You can resize to the following sizes.
8M, 5M, 3M, 1M and VGA.
The original image is retained even after
resizing.
recorded image, and save it as a new file.
You can resize to the following sizes.
8M, 5M, 3M, 1M and VGA.
The original image is retained even after
resizing.
a
Set the mode dial to
.
b
Display the image you want to
resize with
resize with
b
/
B
.
c
Press MENU.
The menu appears.
Mode dial
Multi-selector (
v
/
V
/
b
/
B
)
MENU
91
S
til
l ima
g
e
e
d
iti
n
g
d
Select
(Resize)
with
b
/
B
,
then press the center of the
multi-selector.
multi-selector.
e
Select the new size with
v
/
V
,
then press the center of the
multi-selector.
multi-selector.
The resized image is recorded in the
recording folder as the newest file.
recording folder as the newest file.
To cancel the resizing
In Step 5, select [Cancel].
•
You cannot change the size of movies, Multi
Burst mode, RAW data file or uncompressed
(TIFF) images.
Burst mode, RAW data file or uncompressed
(TIFF) images.
•
When images are resized from a smaller to a
larger size, the image quality will deteriorate.
larger size, the image quality will deteriorate.
•
You cannot resize to 3:2-sized image.
•
If you resize a 3:2-sized image, black bands
will appear at the top and bottom of the image.
will appear at the top and bottom of the image.
Choosing images to
print
– Print (DPOF) mark
Mode dial:
You can designate certain images to be
printed.
This function is convenient when you want
to print images at a shop or using a printer
that conforms with the DPOF (Digital Print
Order Format) standard or using
PictBridge-compliant printers.
printed.
This function is convenient when you want
to print images at a shop or using a printer
that conforms with the DPOF (Digital Print
Order Format) standard or using
PictBridge-compliant printers.
•
You cannot mark movies or images recorded in
RAW mode.
RAW mode.
•
In E-Mail mode, the print (DPOF) mark is
marked on the normal size image that was
recorded at the same time.
marked on the normal size image that was
recorded at the same time.
•
When you mark images shot in Multi Burst
mode, all the images are printed on one sheet
divided into 16 panels.
mode, all the images are printed on one sheet
divided into 16 panels.
•
If you mark an image shot in TIFF mode with a
print (DPOF) mark, only the uncompressed
(TIFF) image is printed, and the JPEG image
recorded at the same time is not printed.
print (DPOF) mark, only the uncompressed
(TIFF) image is printed, and the JPEG image
recorded at the same time is not printed.
•
You cannot set the number of print sheets.
/
Mode dial
Multi-selector (
v
/
V
/
b
/
B
)
MENU
92
On the single screen
a
Set the mode dial to
.
b
Display the image you want to
print with
print with
b
/
B
.
c
Press MENU.
The menu appears.
d
Select [DPOF] (DPOF) with
b
/
B
, then press the center of the
multi-selector.
The
mark is indicated on this
image.
e
To mark other images, display
the image you want to mark
with
the image you want to mark
with
b
/
B
, then press the center
of the multi-selector.
To delete the
mark
In Step 4 or 5, press the center of the
multi-selector again. The
multi-selector again. The
mark
disappears.
On the Index screen
a
Set the mode dial to
and
press
/
(index) to switch
to the Index screen.
b
Press MENU.
The menu appears.
c
Select [DPOF] (DPOF) with
B
,
then press the center of the
multi-selector.
multi-selector.
d
Select [Select] with
b
/
B
, then
press the center of the multi-
selector.
selector.
•
You cannot mark using the [All In This
Folder] option.
Folder] option.
e
Select the images you want to
mark with
mark with
v
/
V
/
b
/
B
, then press
the center of the multi-
selector.
selector.
The green
mark is indicated on the
selected image.
f
To mark other images, repeat
Step
Step
5
for each of them.
g
Press MENU.
h
Select [OK] with
B
, then press
the center of the multi-
selector.
selector.
The
mark turns white and the
setting is completed.
To delete the
mark
In Step 5, select the image you want to
delete the
delete the
mark with v/V/b/B, and
press the center of the multi-selector.
To delete all the
marks from
the images in the folder
In Step 4, select [All In This Folder], then
press the center of the multi-selector. Next,
select [Off], then press the center.
press the center of the multi-selector. Next,
select [Off], then press the center.
To cancel the marking
In Step 4, select [Cancel], or in Step 8,
select [Exit].
select [Exit].
DPOF
Exit
VGA
101
2/9
BACK/NEXT
80
min
TO NEXT
MENU
SELECT
93
S
till
ima
g
e
p
rin
tin
g
(P
ic
tB
rid
g
rid
g
e
p
rin
te
r)
Connecting to a
PictBridge printer
PictBridge printer
Even if you do not have a computer, you
can easily print images shot using your
camera by connecting the camera to a
PictBridge-compliant printer. For
preparation, you only need to select the
USB connection in the SET UP settings and
connect the camera to the printer.
Using a PictBridge-compliant printer
allows you to easily print the Index prints
can easily print images shot using your
camera by connecting the camera to a
PictBridge-compliant printer. For
preparation, you only need to select the
USB connection in the SET UP settings and
connect the camera to the printer.
Using a PictBridge-compliant printer
allows you to easily print the Index prints
*
.
*
An Index print function may not be provided
depending on the printer.
depending on the printer.
•
When printing images, we recommend that you
use the AC Adaptor to prevent the camera
turning off.
use the AC Adaptor to prevent the camera
turning off.
Preparing the camera
Set the USB mode on the camera to connect
the camera with a printer.
the camera with a printer.
a
Set the mode dial to SET UP
.
b
Select
(Setup 2) with
V
, then
select [USB Connect] with
B
/
v
/
V
.
c
Select [PictBridge] with
B
/
v
,
then press the center of the
multi-selector.
multi-selector.
The USB mode is set.
Connecting the camera to
the printer
the printer
Connect the (USB) jack on the camera
and the USB connector on the printer using
a USB cable. The connection can be made
regardless of whether the camera is turned
on or off.
When the camera is turned on, the camera
turns to playback mode regardless of the
mode dial position and the newest image in
the selected recording folder is displayed on
the screen.
and the USB connector on the printer using
a USB cable. The connection can be made
regardless of whether the camera is turned
on or off.
When the camera is turned on, the camera
turns to playback mode regardless of the
mode dial position and the newest image in
the selected recording folder is displayed on
the screen.
Mode dial
Multi-selector (
v
/
V
/
b
/
B
)
Setup 2
File Number:
USB Connect:
Video Out:
Clock Set:
Clock Set:
PTP
Normal
Normal
PictBridge
2
/
9
101
8M
BACK/NEXT
VOLUME
10:30
AM
2004 1 1
101-0002
After the connection
is made, the
is made, the
mark is indicated on
the screen.
the screen.
Printer
Still image printing (PictBridge printer)
Click on the first or last page to see other DSC-F828 (serv.man3) service manuals if exist.