Sony DSC-F828 (serv.man3) Service Manual ▷ View online
78
–
If you perform any invalid operation, the
indicator flashes, and the “Night shot”
indicator lights for about five seconds.
indicator lights for about five seconds.
•
While using the NightShot function, you cannot
use the following functions:
use the following functions:
–
AE LOCK
–
Shooting with hologram AF
–
Shooting with the flash
–
Selecting the color reproduction mode
•
While the camera is in Multi Burst mode, the
NightShot function cannot be used.
NightShot function cannot be used.
•
When [Pop-up Flash] is set to [Manual] in the
SET UP settings, pop up the flash emitter using
the
SET UP settings, pop up the flash emitter using
the
OPEN (FLASH) switch.
•
When attaching the supplied lens hood, infrared
ray may be blocked.
ray may be blocked.
•
Do not use the NightShot function in bright
places (e.g. outdoors in the daytime). This may
cause your camera to malfunction.
places (e.g. outdoors in the daytime). This may
cause your camera to malfunction.
NightFraming
The NightFraming function enables you to
check a subject even at night and then
record with natural colors using the flash.
check a subject even at night and then
record with natural colors using the flash.
a
Set the mode dial to
or P.
b
Press and hold NIGHTSHOT/
NIGHTFRAMING and select
NIGHTFRAMING and select
(Night framing) with the
command dial.
The flash emitter pops up and the
and “Night framing” indicators light
for about five seconds.
for about five seconds.
c
Press and hold the shutter
button halfway down.
button halfway down.
The focus is automatically adjusted.
d
Press the shutter button fully
down.
down.
The shutter sounds, the flash strobes
and the image is recorded.
and the image is recorded.
To cancel the NightFraming function
In Step 2, select [Off].
•
While using the NightFraming function:
–
The white balance is set to Auto.
–
The metering mode is set to multi-pattern
metering.
metering.
–
The AF range finder frame is not displayed.
The centrally-located subject has priority to
focus on.
The centrally-located subject has priority to
focus on.
–
The AE lock cannot be used.
–
If you perform any invalid operation while
using the NightFraming function, the
using the NightFraming function, the
indicator flashes and the “Night framing”
indicator lights for about five seconds.
indicator lights for about five seconds.
•
When [Pop-up Flash] is set to [Manual] in the
SET UP settings, pop up the flash emitter using
the
SET UP settings, pop up the flash emitter using
the
OPEN (FLASH) switch.
•
When attaching the supplied lens hood, flash
light and infrared ray may be blocked.
light and infrared ray may be blocked.
•
When you press the shutter button halfway
down, you will hear a sound, but this is not the
sound of the shutter releasing. The image is not
recorded yet.
down, you will hear a sound, but this is not the
sound of the shutter releasing. The image is not
recorded yet.
•
When [Hologram AF] is set to [Off], you may
not get a clear focus. Setting [Hologram AF] to
[Auto] is recommended (page 35).
not get a clear focus. Setting [Hologram AF] to
[Auto] is recommended (page 35).
•
When using the following functions, you
cannot use the NightFraming function.
cannot use the NightFraming function.
–
Manual focus
–
Exposure Bracket
–
Burst
–
Multi Burst
8M
4
101
"Night framing"
80
min
MAF
79
Ad
vance
vance
d s
til
til
l i
m
ag
e sh
e sh
oot
in
g
Shooting with special
effects
effects
– Picture Effect
Mode dial: P
/
S
/
A
/
M
/
SCN/
You can add special effects to bring out the
contrast in your images.
contrast in your images.
a
Set the mode dial to P, S, A, M,
SCN or
SCN or
.
b
Press MENU.
The menu appears.
c
Select [PFX] (P.Effect) with
b
/
B
, then select the desired
mode with
v
/
V
.
d
Shoot the image.
To cancel Picture Effect
In Step 3, select [Off].
•
You cannot select the color reproduction mode
when using the picture effect.
when using the picture effect.
Shooting still images
in RAW mode
in RAW mode
– RAW
Mode dial:
/
P
/
S
/
A
/
M
/
SCN
Used when you want to record the raw data
directly onto the recording medium as it is.
The data can be reproduced with much less
deterioration in image processing and be
displayed using the exclusive software
provided. A compressed JPEG format
image like that is recorded in normal
shooting is recorded at the same time.
directly onto the recording medium as it is.
The data can be reproduced with much less
deterioration in image processing and be
displayed using the exclusive software
provided. A compressed JPEG format
image like that is recorded in normal
shooting is recorded at the same time.
a
Set the mode dial to
, P, S,
A, M or SCN.
Solarize
Like an illustration
with clearly delineated
bright and dark
portions
with clearly delineated
bright and dark
portions
Sepia
Neg.Art
Colored to look like an
old photograph
old photograph
Made to look like a
negative image
negative image
Mode dial
Multi-selector (
v
/
V
/
b
/
B
)
MENU
Shutter button
Shutter button
Mode dial
MENU
Multi-selector
(
(
v
/
V
/
b
/
B
)
80
b
Press MENU.
The menu appears.
c
Select [Mode] (REC Mode) with
b
/
B
, then select [RAW] with
v
.
d
Shoot the image.
You can do the next shooting after
“Recording” disappears from the
screen.
“Recording” disappears from the
screen.
To return to normal mode
In Step 3, select [Normal].
•
To reproduce the RAW data file using a
computer, the exclusive software is required.
Install the exclusive software on the supplied
CD-ROM to your computer. Since the RAW
data file is a special kind of file, general
software cannot open the RAW data file.
computer, the exclusive software is required.
Install the exclusive software on the supplied
CD-ROM to your computer. Since the RAW
data file is a special kind of file, general
software cannot open the RAW data file.
•
The JPEG image is also recorded in the image
size selected by the Image Size setup (page 24).
(However, [3:2] cannot be selected.) RAW data
images are recorded in [8M] size.
size selected by the Image Size setup (page 24).
(However, [3:2] cannot be selected.) RAW data
images are recorded in [8M] size.
•
Writing data takes more time than in normal
recording mode.
recording mode.
•
Digital zoom cannot be used.
•
For the number of images that can be recorded,
see pages 134, 136.
see pages 134, 136.
Shooting still images
in TIFF mode
in TIFF mode
– TIFF
Mode dial:
/
P
/
S
/
A
/
M
/
SCN
Used when you record an image in
uncompressed file format. The image
quality does not deteriorate. Images
recorded in this mode are suitable for fine
printing. A compressed JPEG format image
like that recorded in normal shooting is
recorded at the same time.
uncompressed file format. The image
quality does not deteriorate. Images
recorded in this mode are suitable for fine
printing. A compressed JPEG format image
like that recorded in normal shooting is
recorded at the same time.
a
Set the mode dial to
, P, S,
A, M or SCN.
b
Press MENU.
The menu appears.
c
Select [Mode] (REC Mode) with
b
/
B
, then select [TIFF] with
v
/
V
.
d
Shoot the image.
You can do the next shooting after
“Recording” disappears from the
screen.
“Recording” disappears from the
screen.
To return to normal mode
In Step 3, select [Normal].
•
JPEG images are also recorded in the image
size selected by the Image Size setup (page 24).
Uncompressed (TIFF) images are recorded in
[8M] size except when [3:2] is selected.
size selected by the Image Size setup (page 24).
Uncompressed (TIFF) images are recorded in
[8M] size except when [3:2] is selected.
•
Writing data takes more time than in normal
recording mode.
recording mode.
•
For the number of images that can be recorded,
see pages 134, 136.
see pages 134, 136.
Shutter button
Mode dial
MENU
Multi-selector
(
(
v
/
V
/
b
/
B
)
81
Ad
vance
vance
d s
til
til
l i
m
ag
e sh
e sh
oot
in
g
Shooting still images
for e-mail
for e-mail
– E-Mail
Mode dial:
/
P
/
S
/
A
/
M
/
SCN
You can shoot images and save them in a
file that is small enough (320×240) to attach
to an e-mail message. The normal mode
image that was selected using the Image
Size item (page 24) is also recorded.
file that is small enough (320×240) to attach
to an e-mail message. The normal mode
image that was selected using the Image
Size item (page 24) is also recorded.
a
Set the mode dial to
, P, S,
A, M or SCN.
b
Press MENU.
The menu appears.
c
Select [Mode] (REC Mode) with
b
/
B
, then select [E-Mail] with
v
/
V
.
d
Shoot the image.
You can do the next shooting after
“Recording” disappears from the
screen.
“Recording” disappears from the
screen.
To return to normal mode
In Step 3, select [Normal].
•
For instructions on how to attach your images
to an e-mail message, refer to the Help files of
the e-mail software you are using.
to an e-mail message, refer to the Help files of
the e-mail software you are using.
•
For the number of images that can be recorded,
see pages 135, 136.
see pages 135, 136.
Shooting still images
with audio files
with audio files
– Voice
Mode dial:
/
P
/
S
/
A
/
M
/
SCN
You can record still images with audio files.
a
Set the mode dial to
, P, S,
A, M or SCN.
b
Press MENU.
The menu appears.
c
Select [Mode] (REC Mode) with
b
/
B
, then select [Voice] with
v
/
V
.
Shutter button
Mode dial
MENU
Multi-selector
(
(
v
/
V
/
b
/
B
)
Shutter button
Mode dial
MENU
Multi-selector
(
(
v
/
V
/
b
/
B
)
Click on the first or last page to see other DSC-F828 (serv.man3) service manuals if exist.