Sony DSC-F828 (serv.man3) Service Manual ▷ View online
110
P
Disconnecting the USB
cable, removing the recording
medium, or turning off the
camera during a USB
connection
medium, or turning off the
camera during a USB
connection
For Windows 2000, Me, or XP users
1
Double-click
on the tasktray.
2
Click
(Sony DSC), then click [Stop].
3
Confirm the device on the confirmation
window, then click [OK].
window, then click [OK].
4
Click [OK].
Step 4 is unnecessary for Windows XP
users.
Step 4 is unnecessary for Windows XP
users.
5
Disconnect the USB cable, remove the
recording medium, or turn off the
camera.
recording medium, or turn off the
camera.
For Windows 98 or 98SE users
Confirm that the access indicators
(page 109) on the screen are turned white
and carry out only Step 5 above.
(page 109) on the screen are turned white
and carry out only Step 5 above.
Copying images using
“Image Transfer”
“Image Transfer”
– Windows 98/98SE/2000/Me
Connect the camera and your
computer with the USB cable.
computer with the USB cable.
“Image Transfer” launches and the images
are automatically copied to the computer.
When copying is complete, “ImageMixer”
automatically launches and images appear.
are automatically copied to the computer.
When copying is complete, “ImageMixer”
automatically launches and images appear.
•
Normally “Image Transfer” and “Date” folders
are created inside the “My Documents” folder,
and all of the image files recorded with the
camera are copied into these folders.
are created inside the “My Documents” folder,
and all of the image files recorded with the
camera are copied into these folders.
•
You can change the “Image Transfer” settings
(page 111).
(page 111).
– Windows XP
Connect the camera and your
computer with the USB cable.
computer with the USB cable.
“Image Transfer” starts up automatically
and the images are automatically copied to
the computer.
Windows XP is set so that the OS AutoPlay
Wizard activates.
If you want to cancel the setting, follow the
procedure below.
and the images are automatically copied to
the computer.
Windows XP is set so that the OS AutoPlay
Wizard activates.
If you want to cancel the setting, follow the
procedure below.
a
Click [Start], then click [My
Computer].
Computer].
b
Right-click [Sony
MemoryStick], then click
[Properties].
MemoryStick], then click
[Properties].
c
Cancel the setting.
1
Click [AutoPlay].
2
Set [Content type] to [Pictures].
3
Check [Select an action to perform]
under [Actions], select [Take no
action], then click [Apply].
under [Actions], select [Take no
action], then click [Apply].
4
Set [Content type] to [Video files]
and proceed Step 3. Set [Content
type] to [Mixed content] and
proceed Step 3.
and proceed Step 3. Set [Content
type] to [Mixed content] and
proceed Step 3.
5
Click [OK].
The [Properties] screen closes.
The [Properties] screen closes.
The OS AutoPlay Wizard does not
start up automatically even if the
USB connection is made next time.
start up automatically even if the
USB connection is made next time.
Double-click here
111
En
jo
jo
y
in
g
i
m
ages
on
y
y
our
c
o
m
put
er
Changing “Image Transfer”
settings
settings
You can change “Image Transfer” settings.
Right-click the “Image Transfer” icon on
the tasktray, select [Open Settings]. The
settings you can set are as follows: [Basic],
[Copy], and [Delete].
Right-click the “Image Transfer” icon on
the tasktray, select [Open Settings]. The
settings you can set are as follows: [Basic],
[Copy], and [Delete].
When the “Image Transfer” starts, the
below window appears.
below window appears.
When you select [Settings] from the above
window, you can only change the [Basic]
setting.
window, you can only change the [Basic]
setting.
Copying images without
using “Image Transfer”
using “Image Transfer”
– Windows 98/98SE/2000/Me
If you do not set to launch “Image Transfer”
automatically, you can copy images as
following procedure.
automatically, you can copy images as
following procedure.
a
Double-click [My Computer],
then double-click [Removable
Disk].
then double-click [Removable
Disk].
The contents of the recording medium
inserted in your camera appear.
inserted in your camera appear.
•
This section describes an example of copying
images to the “My Documents” folder.
images to the “My Documents” folder.
•
When the “Removable Disk” icon is not shown,
see page 112.
see page 112.
•
When using Windows XP, see page 112.
b
Double-click [DCIM], then
double-click the folder that the
image files you want to copy
are stored.
double-click the folder that the
image files you want to copy
are stored.
c
Right-click the image file to
display the menu, then select
[Copy] from the menu.
display the menu, then select
[Copy] from the menu.
d
Double-click the “My
Documents” folder and right-
click on the “My Documents”
window to display the menu,
then select [Paste] from the
menu.
Documents” folder and right-
click on the “My Documents”
window to display the menu,
then select [Paste] from the
menu.
The image files are copied to the “My
Documents” folder.
Documents” folder.
Right-click here
112
When an image with the same
file name exists in the copy
destination folder
file name exists in the copy
destination folder
The overwrite confirmation message
appears. When you overwrite the existing
image with the new one, the original file
data is deleted.
appears. When you overwrite the existing
image with the new one, the original file
data is deleted.
To change the file name
To copy an image file to the computer
without overwriting, change the file name
to the desired name. However, note that if
you change the file name, you may not be
able to play back that image with your
camera. To play back images with the
camera, perform the operation on page 116.
without overwriting, change the file name
to the desired name. However, note that if
you change the file name, you may not be
able to play back that image with your
camera. To play back images with the
camera, perform the operation on page 116.
When a removable disk icon is
not shown
not shown
1
Right-click [My Computer] to display
the menu, then click [Properties].
The “System Properties” screen appears.
the menu, then click [Properties].
The “System Properties” screen appears.
2
Display [Device Manager].
1
Click [Hardware].
2
Click [Device Manager].
• For Windows 98, 98SE, Me users,
Step 1 is unnecessary. Click the
[Device Manager] tab.
[Device Manager] tab.
3
If [
Sony DSC] is displayed, delete it.
1
Right-click [
Sony DSC].
2
Click [Uninstall].
The “Confirm Device Removal”
screen appears.
The “Confirm Device Removal”
screen appears.
• For Windows 98, 98SE, Me users,
click [Remove].
3
Click [OK].
The device is deleted.
The device is deleted.
Try the USB driver installation again using
the supplied CD-ROM (page 106).
the supplied CD-ROM (page 106).
– Windows XP
Copying images using the
Windows XP AutoPlay wizard
Windows XP AutoPlay wizard
a
Make a USB connection
(page 109). Click [Copy
pictures to a folder on my
computer using Microsoft
Scanner and Camera Wizard],
then click [OK].
(page 109). Click [Copy
pictures to a folder on my
computer using Microsoft
Scanner and Camera Wizard],
then click [OK].
The “Scanner and Camera Wizard”
screen appears.
screen appears.
b
Click [Next].
The images stored on the recording
medium are displayed.
medium are displayed.
c
Click the checkbox of images
that you do not want to copy to
your computer to remove the
checkmark, then click [Next].
that you do not want to copy to
your computer to remove the
checkmark, then click [Next].
The “Picture Name and Destination”
screen appears.
screen appears.
d
Select a name and destination
for your pictures, then click
[Next].
for your pictures, then click
[Next].
Image copying starts. When the
copying is completed, the “Other
Options” screen appears.
copying is completed, the “Other
Options” screen appears.
113
En
jo
jo
y
in
g
i
m
ages
on
y
y
our
c
o
m
put
er
e
Select [Nothing. I’m finished
working with these pictures],
then click [Next].
working with these pictures],
then click [Next].
The “Completing the Scanner and
Camera Wizard” screen appears.
Camera Wizard” screen appears.
f
Click [Finish].
The wizard closes.
•
To continue copying other images, follow the
procedure given under P on page 110 to
disconnect the USB cable and reconnect it.
Then, perform the procedure from Step 1
again.
procedure given under P on page 110 to
disconnect the USB cable and reconnect it.
Then, perform the procedure from Step 1
again.
Viewing the images on your
computer
computer
a
Click [Start], then click [My
Documents].
Documents].
The “My Documents” folder contents
are displayed.
are displayed.
•
This section describes the procedure for
viewing copied images in the “My Documents”
folder.
viewing copied images in the “My Documents”
folder.
•
When not using Windows XP, double-click
[My Documents] on the desktop.
[My Documents] on the desktop.
•
You can use the “ImageMixer Ver. 1.5 for
Sony” software to view and edit images on your
computer. For details, see the software’s help
files.
Sony” software to view and edit images on your
computer. For details, see the software’s help
files.
b
Double-click the desired image
file.
file.
The image is displayed.
Click on the first or last page to see other DSC-F828 (serv.man3) service manuals if exist.