Sony MEX-BT5000 Service Manual ▷ View online
5
MEX-BT5000
THE VERSION UP OF THE FIRMWARE
To secure the connectivity with the new cellular phone etc. put on
the market after this machine is put on the market, the upgrade in
service is done.
Procedure:
the market after this machine is put on the market, the upgrade in
service is done.
Procedure:
1. The USB memory is prepared, and the firmware is downloaded
to the USB memory. (The USB memory is a thing to prepare
the one of about 64MB made of SONY POCKET BIT.)
the one of about 64MB made of SONY POCKET BIT.)
2. Power supply of the set is turned off.
3. Press the [4]
3. Press the [4]
t [5] t [6] ([6] is pressed for two seconds)
button of the set sequentially, and enter the service mode.
4. Wait for 1 minute after executing step 3, the set is connected
with the USB memory with connected the USB cable (Part.
No. J-2502-103-1) as shown in Fig.1.
No. J-2502-103-1) as shown in Fig.1.
5. Wait for 1 minute (time untill access LED of USB memory
disappears) after executing step 4, push the joystick for two
seconds of the set, and the version up confirmation screen is
displayed.
seconds of the set, and the version up confirmation screen is
displayed.
6. Select “Yes” by using the UP/DOWN of joystick, and confirm
the displayed version number, and push the joystick.
7. The version up is executed. When the version up ends, reset is
automatically done, and usual screen of power off state is
displayed.
displayed.
Fig.1 Method to connect the set with USB memory
FACTORY SHIPMENT MODE
Even if the set is reset, bluetooth system menu setting, connected
registration equipment, and telephone book function, etc. recorded
in tha flash memory are not initialized. It is necessary to execute
factory shipment mode to initialize them.
Procedure:
registration equipment, and telephone book function, etc. recorded
in tha flash memory are not initialized. It is necessary to execute
factory shipment mode to initialize them.
Procedure:
1. Turn off the setting of the bluetooth signal, and power supply
is turned off.
2. Press the [4]
t [5] t [1] ([1] is pressed for two seconds)
button of the set sequentially, and enter the test mode.
3. Press the [1] button for two seconds of the set, and the DAIG
information is initialized.
4. Press the [6] button for two seconds of the set, and the bluetooth
setting item preserved in NOR FLASH is initialized.
5. Press the [OFF] button of the set, and the test mode is made
clear. At this time, the memory of the tuner is initialized.
6. The power supply code is removed and the power supply is
turned off, and the power supply will be turned on again in
one minute. At this time, the tuner preset, and EQ3 setting
value, etc. are initialized.
one minute. At this time, the tuner preset, and EQ3 setting
value, etc. are initialized.
SUB board
(CN903)
(CN903)
USB memory
USB cable
(Part.No. J-2502-103-1)
(Part.No. J-2502-103-1)
REPLACING THE LITHIUM BATTERY OF THE CARD
REMOTE COMMANDER
REMOTE COMMANDER
Under normal conditions, the battery will last approximately 1 year.
(The service life may be shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the card remote commander
becomes shorter. Replace the battery with a new CR2025 lithium battery.
Use of any other battery may present a risk of fire or explosion.
When the battery becomes weak, the range of the card remote commander
becomes shorter. Replace the battery with a new CR2025 lithium battery.
Use of any other battery may present a risk of fire or explosion.
Notes on the lithium battery
•
Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately consult a doctor.
Should the battery be swallowed, immediately consult a doctor.
•
Wipe the battery with a dry cloth to assure a good contact.
•
Be sure to observe the correct polarity when installing the battery.
•
Do not hold the battery with metallic tweezers, otherwise a short-circuit may
occur.
occur.
c
+ side up
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of in fire.
Do not recharge, disassemble, or dispose of in fire.
RELEASING THE DISC SLOT LOCK
The disc slot lock function for the antitheft of an demonstration
disc in the store is equipped.
Releasing Procedure :
disc in the store is equipped.
Releasing Procedure :
1. Power supply is turned off.
2. Enter the Jog daial to the left, and enter the Jog daial to the
2. Enter the Jog daial to the left, and enter the Jog daial to the
right, and press the [1]
t [2] ([2] is pressed for two seconds)
button of the set sequentially, and disc slot is unlocked.
SECURITY
To lock the personal information in the following menus by setting
a 4-digit password.
“Dialed Calls,” “Received Calls,” “Phonebook,”
“Preset Dial,” “Receive PB”
If you set the security, “Security Locked” appears when the above
menus are operated.
To unlock the security, select “Unlock” and input the password
number.
a 4-digit password.
“Dialed Calls,” “Received Calls,” “Phonebook,”
“Preset Dial,” “Receive PB”
If you set the security, “Security Locked” appears when the above
menus are operated.
To unlock the security, select “Unlock” and input the password
number.
TEST DISCS
Use following TEST DISC whan this set confirms the operation
and checks it.
and checks it.
3-702-101-01 YEDS-18 (for CD)
4-225-203-01 PATD-012 (for CD)
J-2502-063-1
4-225-203-01 PATD-012 (for CD)
J-2502-063-1
TCD-R082LMT (for CD-R)
6
MEX-BT5000
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
Location of controls and basic operations
Audio function
Main unit
Front panel removed
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/Bluetooth AUDIO/AUX/SAT*
2
).
B
Joystick/LIST button
Rotate to: Adjust the volume.
Push up/down/left/right to: Select a menu
item.
Press to: Apply a setting.
CD/MD*
Push up/down/left/right to: Select a menu
item.
Press to: Apply a setting.
CD/MD*
1
:
Push up/down to*
3
:
−Skip groups*
4
/albums*
5
(push).
−Skip groups*
4
/albums*
5
continuously
(push and hold).
Push left/right to:
−Skip tracks (push).
−Skip tracks continuously (push, then push
again within about 2 seconds and hold).
−Reverse/fast-forward a track (push and
hold).
Radio:
Push up/down to:
Push up/down to:
− Receive stored station.
Push left/right to:
Push left/right to:
− Tune in stations automatically (push).
− Find a station manually (push and hold).
Press to:
Press to:
− Display the list.
− Display the category list*
2
.
C
MODE button
To select the radio band (FM/AM)/select the
SAT tuner band (mode)*
SAT tuner band (mode)*
2
/select the unit*
6
.
D
MENU button
To enter menu.
E
Display window
F
OPEN button
G
OFF button
To power off; stop the source.
H
Receptor for the card remote
commander
commander
MEX-BT5000
1
7
9
qa
0
8
3
5
6
2
4
RESET
qf
qd
qs
Card remote commander RM-X301
I
SCRL (scroll) button
To scroll the display item.
J
Number buttons
CD/MD*
1
:
(1):
REP
(2):
SHUF
(5):
BBE MP
*
7
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
“BBE MP on.” To cancel, set “BBE MP
off.”
(6):
PAUSE
*
7
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
K
DSPL (display) button
To change display items.
L
Disc slot
To insert the disc.
M
RESET button
N Z
(eject) button
To eject the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
qg
ENTER button
To apply a setting.
qh
LIST/CAT
*
2
button
To list up.
qj
Number buttons
Buttons 1 to 6 share the same functions as
the number buttons on the unit.
the number buttons on the unit.
qk M
(+)/
m
(–) buttons
The same as pushing the joystick up/down.
ql <
(
.
)/
,
(
>
) buttons
The same as pushing the joystick left/right.
w;
SOUND button
To select sound items.
wa
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
ws
VOL (volume) +/– buttons
To adjust volume.
*1
When an MD changer is connected.
*2
When the SAT tuner is connected.
*3
If the changer is connected, the operation is
different.
different.
*4
When an ATRAC CD is played.
*5
When an MP3/WMA is played.
*6
When a CD/MD changer is connected.
*7
When playing back on this unit.
Note
If the unit is turned off and the display
disappears, it cannot be operated with the card
remote commander unless
If the unit is turned off and the display
disappears, it cannot be operated with the card
remote commander unless
(SOURCE)
on the unit
is pressed, or a disc is inserted to activate the unit
first.
first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander”.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander”.
7
ql
qk
9
wa
ws
w;
1
qg
3
4
qh
qa
qa
qj
(US, Canadian)
7
MEX-BT5000
Bluetooth function
Main unit
Front panel removed
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/Bluetooth AUDIO/AUX/SAT*
2
).
B
Joystick
Rotate to: Adjust the volume.
Push up/down/left/right to: Select a menu
item.
Press to: Apply a setting.
Bluetooth audio device*
Push up/down/left/right to: Select a menu
item.
Press to: Apply a setting.
Bluetooth audio device*
3
:
Push left/right to:
−Skip tracks (push).
−Reverse/fast-forward a track (push and
hold).
C
Bluetooth button
To access the Bluetooth functions; receive a
call.
call.
D
MENU button
To enter menu; receive a call.
E
Display window
F
OFF button
To power off; stop the source; end or reject a
call.
call.
G
CALL button
To access the telephone functions; receive a
call.
call.
H
Receptor for the card remote
commander
commander
I
Number buttons
To call stored dials.
Bluetooth audio device*
Bluetooth audio device*
3
:
(6):
PAUSE
To pause playback.
J
Bluetooth indicator
Lights up when the Bluetooth signal is input/
output. Goes off when the Bluetooth signal is
off.
output. Goes off when the Bluetooth signal is
off.
K
Microphone
MEX-BT5000
1
6
9
7
8
3
5
2
4
RESET
qa
0
Card remote commander RM-X301
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
qs
ENTER button
To apply a setting.
qd
Number buttons
To input numbers (phone number, passcode,
etc.).
Buttons 1 to 6 share the same functions as
the number buttons on the unit.
etc.).
Buttons 1 to 6 share the same functions as
the number buttons on the unit.
qf
button
qg M
(+)/
m
(–) buttons
The same as pushing the joystick up/down.
qh <
(
.
)/
,
(
>
) buttons
The same as pushing the joystick left/right.
qj
VOL (volume) +/– buttons
To adjust volume.
qk
button
*1
When an MD changer is connected.
*2
When the SAT tuner is connected.
*3
When a Bluetooth audio device (supports AVRCP
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
Note
If the unit is turned off and the display
disappears, it cannot be operated with the card
remote commander unless
If the unit is turned off and the display
disappears, it cannot be operated with the card
remote commander unless
(SOURCE)
unit is pressed, or a disc is inserted to activate
the unit first.
the unit first.
Tip
For details on how to replace the battery, see
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander”.
7
3
6
qh
qg
qj
qk
1
qs
4
qd
qf
on the
8
MEX-BT5000
(AEP, UK)
Location of controls and basic operations
Audio function
Main unit
Front panel removed
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
SOURCE button
To power on; change the source (Radio/CD/
MD*
MD*
1
/Bluetooth AUDIO/AUX).
B
Joystick/LIST button
Rotate to: Adjust the volume.
Push up/down/left/right to: Select a menu
item.
Press to: Apply a setting.
CD/MD*
Push up/down/left/right to: Select a menu
item.
Press to: Apply a setting.
CD/MD*
1
:
Push up/down to*
2
:
−Skip groups*
3
/albums*
4
(push).
−Skip groups*
3
/albums*
4
continuously
(push and hold).
Push left/right to:
−Skip tracks (push).
−Skip tracks continuously (push, then push
again within about 2 seconds and hold).
−Reverse/fast-forward a track (push and
hold).
Radio:
Push up/down to:
Push up/down to:
− Receive stored station.
Push left/right to:
Push left/right to:
− Tune in stations automatically (push).
− Find a station manually (push and hold).
Press to:
Press to:
− Display the list.
C
MODE button
To select the radio band (FM/MW/LW)/
select the unit*
select the unit*
5
.
D
MENU button
To enter menu.
E
Display window
F
OPEN button
OFF button
To power off; stop the source.
H
Receptor for the card remote
commander
commander
MEX-BT5000
1
7
9
qa
0
8
3
5
6
2
4
RESET
qf
qd
qs
Card remote commander RM-X302
I
AF (Alternative Frequencies)/TA
(Traffic Announcement) button
(Traffic Announcement) button
To set AF and TA in RDS.
J
Number buttons
CD/MD*
1
:
(1):
REP
(2):
SHUF
(5):
BBE MP
*
6
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
“BBE MP on.” To cancel, set “BBE MP
off.”
(6):
PAUSE
*
6
To pause playback. To cancel, press
again.
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
To receive stored stations (press); store
stations (press and hold).
K
DSPL (display)/PTY (Programme
Type) button
Type) button
To change display items; select PTY in RDS.
L
Disc slot
To insert the disc.
M
RESET button
N Z
(eject) button
To eject the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
qg
ENTER button
To apply a setting.
qh
LIST button
To list up.
qj
Number buttons
Buttons 1 to 6 share the same functions as
the number buttons on the unit.
the number buttons on the unit.
qk M
(+)/
m
(–) buttons
The same as pushing the joystick up/down.
ql <
(
.
)/
,
(
>
) buttons
The same as pushing the joystick left/right.
w;
SCRL (scroll) button
To scroll display item.
wa
SOUND button
To select sound items.
ws
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
wd
VOL (volume) +/– buttons
To adjust volume.
*1
When an MD changer is connected.
*2
If the changer is connected, the operation is
different.
different.
*3
When an ATRAC CD is played.
*4
When an MP3/WMA is played.
*5
When a CD/MD changer is connected.
*6
When playing back on this unit.
Note
If the unit is turned off and the display
disappears, it cannot be operated with the
card remote commander unless
If the unit is turned off and the display
disappears, it cannot be operated with the
card remote commander unless
(SOURCE)
on the unit is pressed, or a disc is inserted
to activate the unit first.
to activate the unit first.
Tip
For details on how to replace the battery,
see “Replacing the lithium battery of the
card remote commander”.
For details on how to replace the battery,
see “Replacing the lithium battery of the
card remote commander”.
7
ql
qk
w;
ws
wd
wa
1
qg
3
4
qh
qa
qa
qj
Click on the first or last page to see other MEX-BT5000 service manuals if exist.