Sony MEX-BT2800 / MEX-BT2807E / MEX-BT2850 Service Manual ▷ View online
MEX-BT2800/BT2807E/BT2850
17
3-9. CHASSIS (OP) ASSY
3-10. CHUCKING ARM SUB ASSY
6 two coil springs (damper) (natural)
7 coil spring (damper) (green)
8 chassis (OP) assy
5
1 tension spring (KF)
2 gear (LE1)
3 lever (D)
4 slider (R)
3 chucking arm sub assy
2
1 spring
Note 1: Have this portion receive the chassis.
Note 1: Have this portion receive the chassis.
Note 2: Be careful not to touch the turn table.
MEX-BT2800/BT2807E/BT2850
18
3-11. SLED MOTOR ASSY
3 sled motor assy
sled motor assy
1 spring
spring
stand
stand
turn table
2 three serration screws
(M
2
u 3)
three
serration
screws
(M
2
u 3)
Note 1: Place the stand with care not to touch the turn table.
Note 2:
Never remove these parts since they were adjusted.
Never remove these parts since they were adjusted.
Note for Assembly
Note 3: Take care to prevent the chassis from being bent
when tightening the three machine screws.
bearing (F)
bearing (R)
MEX-BT2800/BT2807E/BT2850
19
3-12. OPTICAL PICK-UP SECTION
3-13. OPTICAL PICK-UP
1
2 optical pick-up section
Note: Be careful not to touch the lens and hologram
terminal when removing the optical pick-up section.
There is space at the end of the
leaf spring (sub guide) to avoid
contact with the slide.
leaf spring (sub guide) to avoid
contact with the slide.
1 pan tapping screw
(M
1.4
u 2.5)
2 leaf spring (sub guide)
3 leaf spring (OP)
5 optical pick-up
4 lead screw assy
Notes for Assembly
Prevent the end of the
leaf spring (sub guide) from being
in contact with the OP slide base.
leaf spring (sub guide) from being
in contact with the OP slide base.
Prevent the end of the
leaf spring (sub guide) from being
in contact with the OP slide base.
leaf spring (sub guide) from being
in contact with the OP slide base.
MEX-BT2800/BT2807E/BT2850
20
MEMO
Click on the first or last page to see other MEX-BT2800 / MEX-BT2807E / MEX-BT2850 service manuals if exist.