Sony CDX-S2210 / CDX-S2210S / CDX-S2210X / CDX-S2250EE / CDX-SW330 Service Manual ▷ View online
5
CDX-S2210/S2210S/S2210X/S2250EE/SW330
Location of controls and basic operations
Main unit
Refer to the pages listed for details.
a
Volume +/– button
To adjust volume.
b
SEL (select) button 4, 7
To select items.
c
SOURCE button
To power on/change the source (Radio/CD).
d
MODE button 6
To select the radio band (FM/AM).
e
Disc slot
Insert the disc (label side up), playback
starts.
starts.
f
Display window
g
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
h
EQ3 (equalizer) button 7
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
i Z
(eject) button
To eject the disc.
j
SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
k
(front panel release) button 4
l
DSPL (display)/DIM (dimmer) button
4
4
To change display items (press); change the
display brightness (press and hold).
display brightness (press and hold).
m
SENS button
To improve weak reception: LOCAL/
MONO.
MONO.
n
RESET button
(located behind the front
panel)
4
o
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2):
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2):
GROUP
* –/+
To skip groups (press); skip groups
continuously (press and hold).
(3):
continuously (press and hold).
(3):
REP 6
(4):
SHUF 6
p
BTM button 6
To start the BTM function (press and hold).
q
OFF button
To power off/stop the source.
r
Receptor for the card remote
commander 8
commander 8
*
When an MP3/ATRAC CD is played.
SENS
BTM
OFF
DSPL
1
2
3
4
5
6
SEL
DIM
SHUF
REP
EQ3
ATT
SOURCE MODE
SEEK
CDX-S2250EE
–
+
GROUP
qa
1
2 3 4
5
6
7 8 9
0
qs qd
qg
qh qj
qk
qf
Location of controls and basic operations
Main unit
Refer to the pages listed for details.
a
Volume +/– button
To adjust volume.
b
SEL (select) button 4, 7
To select items.
c
SOURCE button
To power on/change the source (Radio/CD).
d
MODE button 6
To select the radio band (FM/AM).
e
Disc slot
Insert the disc (label side up), playback
starts.
starts.
f
Display window
g
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
h
EQ3 (equalizer) button 7
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
i Z
(eject) button
To eject the disc.
j
SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
k
(front panel release) button 4
l
DSPL (display)/DIM (dimmer) button
4, 6
4, 6
To change display items (press); change the
display brightness (press and hold).
display brightness (press and hold).
m
SENS button
To improve weak reception: LOCAL/
MONO.
MONO.
n
RESET button
(located behind the front
panel)
4
o
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2):
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2):
GROUP
* –/+
To skip groups (press); skip groups
continuously (press and hold).
(3):
continuously (press and hold).
(3):
REP 6
(4):
SHUF 6
p
BTM button 6
To start the BTM function (press and hold).
q
OFF button
To power off/stop the source.
r
Receptor for the card remote
commander 8
commander 8
*
When an MP3/ATRAC CD is played.
SENS
BTM
OFF
DSPL
1
2
3
4
5
6
SEL
DIM
SHUF
REP
EQ3
ATT
SOURCE MODE
SEEK
CDX-S2210
–
+
GROUP
qa
1
2 3 4
5
6
7 8 9
0
qs qd
qg
qh qj
qk
qf
Location of controls and basic operations
Main unit
Card remote commander RM-X151
(CDX-S2210S only)
)
SENS
BTM
OFF
DSPL
1
2
3
4
5
6
SEL
DIM
SHUF
REP
EQ3
ATT
SOURCE MODE
SEEK
CDX-S2210X
CDX-S2210S
CDX-S2210C
CDX-S2210S
CDX-S2210C
–
+
GROUP
qa
1
2 3 4
5
6
7 8 9
0
qs qd
qg
qh
qj qk
qf
ql
SENS
BTM
OFF
DSPL
1
2
3
4
5
6
SEL
DIM
SHUF
REP
EQ3
ATT
SOURCE MODE
SEEK
CDX-S2210X
CDX-S2210S
CDX-S2210C
CDX-S2210S
CDX-S2210C
–
+
GROUP
qa
1
2 3 4
5
6
7 8 9
0
qs qd
qg
qh
qj qk
qf
ql
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
7
qs
qk
3
4
2
wd
w;
wa
wf
ws
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
a
Volume +/– button
To adjust volume.
b
SEL (select) button 4, 9
To select items.
c
SOURCE button
To power on/change the source (Radio/CD).
d
MODE button 8
To select the radio band (FM/AM).
e
Disc slot
Insert the disc (label side up), playback
starts.
starts.
f
Display window
g
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
h
EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
i Z
(eject) button
To eject the disc.
j
SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
k
(front panel release) button 4
l
DSPL (display)/DIM (dimmer) button
4, 8
4, 8
To change display items (press); change the
display brightness (press and hold).
display brightness (press and hold).
m
SENS button
To improve weak reception: LOCAL/
MONO.
MONO.
n
RESET button
(located behind the front
panel)
4
o
Frequency select switch
(located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
See “Frequency select switch” in the
supplied installation/connections manual.
p
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2):
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2):
GROUP
* –/+
To skip groups (press); skip groups
continuously (press and hold).
(3):
continuously (press and hold).
(3):
REP 8
(4):
SHUF 8
q
BTM button 8
To start the BTM function (press and hold).
r
OFF button
To power off/stop the source.
s
Receptor for the card remote
commander 10
commander 10
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
t <
(
.
)/
,
(
>
) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
u
VOL +/– button
To adjust volume.
v M
(+)/
m
(–) buttons
To control CD, the same as (1)/(2) –/+ on
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
w
SCRL button
To scroll the display item.
x
Number buttons
To receive stored stations (press); store
stations (press and hold).
stations (press and hold).
*
When an MP3/ATRAC CD is played.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
(CDX-S2210)
(CDX-S2250EE)
(CDX-S2210S/S2210X)
6
CDX-S2210/S2210S/S2210X/S2250EE/SW330
Location of controls and basic operations
Main unit
Card remote commander RM-X151
SENS
BTM
OFF
DSPL
1
2
3
4
5
6
SEL
DIM
SHUF
REP
EQ3
ATT
SOURCE MODE
SEEK
CDX-SW330
–
+
GROUP
qa
1
2 3 4
5
6
7 8 9
0
qs qd
qg
qh qj
qf
qk
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
7
qs
qj
3
4
2
ws
ql
w;
wd
wa
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
a
Volume +/– button
To adjust volume.
b
SEL (select) button 4, 9, 9, 9
To select items.
c
SOURCE button
To power on/change the source (Radio/CD).
d
MODE button 8
To select the radio band (FM/AM).
e
Disc slot
Insert the disc (label side up), playback
starts.
starts.
f
Display window
g
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
h
EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
i Z
(eject) button
To eject the disc.
j
SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
k
(front panel release) button 4
l
DSPL (display)/DIM (dimmer) button
4, 8
4, 8
To change display items (press); change the
display brightness (press and hold).
display brightness (press and hold).
m
SENS button
To improve weak reception: LOCAL/
MONO.
MONO.
n
RESET button
(located behind the front
panel)
4
o
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2):
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2):
GROUP
* –/+
To skip groups (press); skip groups
continuously (press and hold).
(3):
continuously (press and hold).
(3):
REP 8
(4):
SHUF 8
p
BTM button 8
To start the BTM function (press and hold).
q
OFF button
To power off/stop the source.
r
Receptor for the card remote
commander
commander
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
s <
(
.
)/
,
(
>
) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
t
VOL +/– button
To adjust volume.
u M
(+)/
m
(–) buttons
To control CD, the same as (1)/(2) –/+ on
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
v
SCRL button
To scroll the display item.
w
Number buttons
To receive stored stations (press); store
stations (press and hold).
stations (press and hold).
*
When an MP3/ATRAC CD is played.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 11.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 11.
(CDX-SW330)
7
CDX-S2210/S2210S/S2210X/S2250EE/SW330
Connections (CDX-S2210)
BUS
AUDIO
IN
L
R
AUDIO
OUT
L
R
AUDIO OUT REAR
*
2
2
4
5
1
3
Schéma de raccordement (3)
1
À un point métallique de la voiture
Branchez d’abord le câble de mise à la masse noir et,
ensuite, les câbles d’entrée d’alimentation jaune et rouge.
ensuite, les câbles d’entrée d’alimentation jaune et rouge.
2
Vers le câble de commande d’antenne
électrique ou le câble d’alimentation de
l’amplifi cateur d’antenne
l’amplifi cateur d’antenne
Remarques
• Il n’est pas nécessaire de raccorder ce câble s’il n'y a pas
• Il n’est pas nécessaire de raccorder ce câble s’il n'y a pas
d’antenne électrique ni d’amplifi cateur d’antenne, ou avec
une antenne télescopique manuelle.
une antenne télescopique manuelle.
• Si votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, voir « Remarques
sur les câbles de commande et d’alimentation ».
sur les câbles de commande et d’alimentation ».
3
Au niveau de AMP REMOTE IN de
l’amplifi cateur de puissance en option
Ce raccordement s’applique uniquement aux amplifi cateurs.
Le branchement de tout autre système risque
d’endommager l’appareil.
Le branchement de tout autre système risque
d’endommager l’appareil.
4
À la borne +12 V qui est alimentée quand la
clé de contact est sur la position accessoires
Remarques
• S’il n’y a pas de position accessoires, raccordez la borne
• S’il n’y a pas de position accessoires, raccordez la borne
d’alimentation (batterie) +12 V qui est alimentée en
permanence. Raccordez d’abord le câble de mise à la
masse noir à un point métallique du véhicule.
permanence. Raccordez d’abord le câble de mise à la
masse noir à un point métallique du véhicule.
• Si votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, voir « Remarques
sur les câbles de commande et d’alimentation ».
sur les câbles de commande et d’alimentation ».
5
À la borne +12 V qui est alimentée en
permanence
Raccordez d’abord le câble de mise à la masse noir à un
point métallique du véhicule.
point métallique du véhicule.
Connection diagram (3)
1
To a metal surface of the car
First connect the black ground lead, then connect the yellow
and red power input leads.
and red power input leads.
2
To the power antenna control lead or power
supply lead of antenna booster amplifi er
Notes
• It is not necessary to connect this lead if there is no power
• It is not necessary to connect this lead if there is no power
antenna or antenna booster, or with a manually-operated
telescopic antenna.
telescopic antenna.
• When your car has a built-in FM/AM antenna in the rear/
side glass, see “Notes on the control and power supply
leads.”
leads.”
3
To AMP REMOTE IN of an optional power
amplifi er
This connection is only for amplifi ers. Connecting any other
system may damage the unit.
system may damage the unit.
4
To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch
ignition key switch
Notes
• If there is no accessory position, connect to the +12 V
• If there is no accessory position, connect to the +12 V
power (battery) terminal which is energized at all times.
Be sure to connect the black ground lead to a metal
surface of the car fi rst.
• When your car has a built-in FM/AM antenna in the rear/
side glass, see “Notes on the control and power supply
leads.”
leads.”
5
To the +12 V power terminal which is
energized at all times
Be sure to connect the black ground lead to a metal surface
of the car fi rst.
of the car fi rst.
AMP REM
Max. supply current 0.3 A
Courant max. fourni 0,3 A
Courant max. fourni 0,3 A
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
Blue/white striped
Rayé bleu/blanc
Rayé bleu/blanc
from car antenna
à partir de l’antenne de la voiture
à partir de l’antenne de la voiture
ANT REM
2
*
1
Red
Rouge
Rouge
Yellow
Jaune
Jaune
Black
Noir
Noir
Blue
Bleu
Bleu
White
Blanc
Blanc
Green
Vert
Vert
Purple
Mauve
Mauve
White/black striped
Rayé blanc/noir
Rayé blanc/noir
Gray/black striped
Rayé gris/noir
Rayé gris/noir
Green/black striped
Rayé vert/noir
Rayé vert/noir
Gray
Gris
Gris
Left
Gauche
Gauche
Right
Droit
Droit
Left
Gauche
Gauche
Right
Droit
Droit
Max. supply current 0.1 A
Courant max. fourni 0,1 A
Courant max. fourni 0,1 A
*
1
RCA pin cord (not supplied)
*
2
AUDIO OUT can be switched to SUB
or REAR.
or REAR.
For details, see the supplied
operating instructions.
*
1
Cordon à broche RCA (non fourni)
*
2
AUDIO OUT peut être commuté sur
SUB ou REAR.
SUB ou REAR.
Pour obtenir plus de détails, reportez-
vous au mode d’emploi fourni.
Purple/black striped
Rayé mauve/noir
Rayé mauve/noir
Remarques sur les câbles de commande et d’alimentation
• Le câble de commande d’antenne électrique (bleu) fournit une
• Le câble de commande d’antenne électrique (bleu) fournit une
alimentation de + 12 V CC lorsque vous mettez la radio sous
tension.
tension.
• Lorsque votre voiture est équipée d’une antenne FM/AM
intégrée dans la vitre arrière/latérale, raccordez le câble de
commande d’antenne (bleu) ou l’entrée d’alimentation des
accessoires (rouge) à la borne d’alimentation de l’amplifi cateur
d’antenne existant. Pour plus de détails, consultez votre
détaillant.
commande d’antenne (bleu) ou l’entrée d’alimentation des
accessoires (rouge) à la borne d’alimentation de l’amplifi cateur
d’antenne existant. Pour plus de détails, consultez votre
détaillant.
• Une antenne électrique sans boîtier de relais ne peut pas être
utilisée avec cet appareil.
Raccordement pour la conservation de la mémoire
Lorsque le câble d’entrée d’alimentation jaune est raccordé, le
circuit de la mémoire est alimenté en permanence même si la clé
de contact est sur la position d’arrêt.
Lorsque le câble d’entrée d’alimentation jaune est raccordé, le
circuit de la mémoire est alimenté en permanence même si la clé
de contact est sur la position d’arrêt.
Remarques sur le raccordement des haut-parleurs
• Avant de raccorder les haut-parleurs, mettez l’appareil hors
• Avant de raccorder les haut-parleurs, mettez l’appareil hors
tension.
• Utilisez des haut-parleurs ayant une impédance de 4 à 8 ohms
avec une capacité électrique adéquate pour éviter de les
endommager.
endommager.
• Ne raccordez pas les bornes du système de haut-parleurs au
châssis de la voiture et ne raccordez pas les bornes des haut-
parleurs droit à celles du haut-parleur gauche.
parleurs droit à celles du haut-parleur gauche.
• Ne raccordez pas le câble de mise à la masse de cet appareil
à la borne négative (–) du haut-parleur.
• N’essayez pas de raccorder les haut-parleurs en parallèle.
• Raccordez uniquement des haut-parleurs passifs. Le
• Raccordez uniquement des haut-parleurs passifs. Le
raccordement de haut-parleurs actifs (avec amplifi cateurs
intégrés) aux bornes des haut-parleurs peut endommager
l’appareil.
intégrés) aux bornes des haut-parleurs peut endommager
l’appareil.
• Pour éviter tout dysfonctionnement, n’utilisez pas les câbles
des haut-parleurs intégrés installés dans votre voiture si
l’appareil partage un câble négatif commun (–) pour les haut-
parleurs droit et gauche.
l’appareil partage un câble négatif commun (–) pour les haut-
parleurs droit et gauche.
• Ne raccordez pas entre eux les cordons des haut-parleurs de
l’appareil.
Remarque sur le raccordement
Si les haut-parleurs et l’amplifi cateur ne sont pas raccordés
correctement, le message « FAILURE » s’affi che. Dans ce cas,
assurez-vous que les haut-parleurs et l’amplifi cateur sont bien
raccordés.
Si les haut-parleurs et l’amplifi cateur ne sont pas raccordés
correctement, le message « FAILURE » s’affi che. Dans ce cas,
assurez-vous que les haut-parleurs et l’amplifi cateur sont bien
raccordés.
Notes on the control and power supply leads
• The power antenna control lead (blue) supplies +12 V DC
• The power antenna control lead (blue) supplies +12 V DC
when you turn on the tuner.
• When your car has built-in FM/AM antenna in the rear/side
glass, connect the power antenna control lead (blue) or the
accessory power input lead (red) to the power terminal of the
existing antenna booster. For details, consult your dealer.
accessory power input lead (red) to the power terminal of the
existing antenna booster. For details, consult your dealer.
• A power antenna without a relay box cannot be used with this
unit.
Memory hold connection
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
When the yellow power input lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
• Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
left speaker.
• Do not connect the ground lead of this unit to the negative (–)
terminal of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active speakers
• Connect only passive speakers. Connecting active speakers
(with built-in amplifi ers) to the speaker terminals may damage
the unit.
the unit.
• To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
lead for the right and left speakers.
• Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
If speaker and amplifi er are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifi er are connected correctly.
8
CDX-S2210/S2210S/S2210X/S2250EE/SW330
Connections (CDX-S2210S/S2210X)
Click on the first or last page to see other CDX-S2210 / CDX-S2210S / CDX-S2210X / CDX-S2250EE / CDX-SW330 service manuals if exist.