DOWNLOAD Sony CDX-GT575UE / CDX-GT575UI / CDX-GT575UP / CDX-GT625UI / CDX-GT627UV Service Manual ↓ Size: 3.95 MB | Pages: 52 in PDF or view online for FREE

Model
CDX-GT575UE CDX-GT575UI CDX-GT575UP CDX-GT625UI CDX-GT627UV
Pages
52
Size
3.95 MB
Type
PDF
Document
Service Manual
Brand
Device
Car Audio
File
cdx-gt575ue-cdx-gt575ui-cdx-gt575up-cdx-gt625ui-cd.pdf
Date
PREV: Sony CDX-GT570UE / CDX-GT570UI / CDX-GT570UP / CDX-GT574UI / CDX-GT57UPW / CDX-GT620UI / CDX-GT626UI / CDX-GT62UMI Service Manual

Sony CDX-GT575UE / CDX-GT575UI / CDX-GT575UP / CDX-GT625UI / CDX-GT627UV Service Manual ▷ View online

CDX-GT575UE/GT575UI/GT575UP/GT625UI/GT627UV
13
3-5.  MAIN  BOARD
1 three ground point screws
 (PTT2.6 
u 6)
2 screw
 (PTT2.6 
u 8)
2 screw
 (PTT2.6 
u 8)
3 MAIN board
3-6.  SERVO  BOARD
6 SERVO board 
3 claw
4 claw
SERVO board 
2 toothed lock screw
 (M1.7 
u 2.5)
2 toothed lock screw
 (M1.7 
u 2.5)
1 Remove the eleven solders.
GRY
YEL
BLU
ORG
RED
BLK
RED
WHT
BLK
RED
WHT
5 optical pick-up (16 core)
 (CN101)
CD mechanism deck
–
 CD mechanism deck bottom side view 
–
Note: When the complete MAIN board is replaced, the destination 
setting is necessary. Refer to “NOTE THE MAIN BOARD OR 
SYSTEM CONTROLLER (IC501) REPLACING” on page 4.
CDX-GT575UE/GT575UI/GT575UP/GT625UI/GT627UV
14
3-7.  CHASSIS (T)  SUB  ASSY
3-8.  ROLLER  ARM  ASSY
3 chassis (T) sub assy
2 claw
1 two screws
 (M1.7 
u 2.5)
1 two screws
 (M1.7 
u 2.5)
3 washer
5 roller arm assy
1 spring (RAL)
2 spring (RAR)
4 gear (HRA)
CDX-GT575UE/GT575UI/GT575UP/GT625UI/GT627UV
15
3-9.  CHASSIS (OP)  ASSY
3-10.  CHUCKING  ARM  SUB  ASSY
6 two coil springs (damper) (natural)
7 coil spring (damper) (blue)
8 chassis (OP) assy
5
1 tension spring (KF)
2 gear (LE1)
3 lever (D)
4 slider (R)
3 chucking arm sub assy
2
1 spring
Note 1: Have this portion receive the chassis.
Note 1: Have this portion receive the chassis.
Note 2: Be careful not to touch the turn table.
CDX-GT575UE/GT575UI/GT575UP/GT625UI/GT627UV
16
3-11.  SLED  MOTOR  ASSY
3 sled motor assy
sled motor assy
1 spring
spring
stand
stand
turn table
2 three serration screws
 (M2 
u 3)
 three 
serration 
screws
 (M2 
u 3)
bearing (F)
bearing (R)
Note 1: Place the stand with care not to touch the turn table.
Note 2: Never remove these parts since they were adjusted.
Note 3: Take care to prevent the chassis from being bent
 
when tightening the three machine screws.
‡1RWHIRU$VVHPEO\
–
ERWWRPVLGHYLHZ
–
–
ERWWRPVLGHYLHZ
–
–
ERWWRPVLGHYLHZ
–
Page of 52
Display

Click on the first or last page to see other CDX-GT575UE / CDX-GT575UI / CDX-GT575UP / CDX-GT625UI / CDX-GT627UV service manuals if exist.

RANDOM: