Sony CDX-GT56UI Service Manual ▷ View online
CDX-GT56UI/GT56UIW
13
3-7. CHASSIS (OP) ASSY
3-8. CHUCKING ARM SUB ASSY
7 two coil springs (damper) (natural)
6 coil spring (damper) (blue)
8 chassis (OP) assy
5
1 tension spring (KF)
2 gear (LE1)
3 lever (D)
4 slider (R)
3 chucking arm sub assy
2
1 spring
Note: Have this portion receive the chassis.
Note: Have this portion receive the chassis.
Note: Be careful not to touch the turn table.
CDX-GT56UI/GT56UIW
14
3-9. SLED MOTOR ASSY
3 sled motor assy
sled motor assy
1 spring
spring
stand
stand
turn table
2 three serration screws
(M
2
u 3)
three serration screws
(M 2
(M 2
u 3)
Note: Place the stand with care not to touch the turn table.
Note:
Never remove these parts since they were adjusted.
Never remove these parts since they were adjusted.
bearing (R)
bearing (F)
Note for Assembly
Note: Take care to prevent the chassis from being bent
when tightening the three machine screws.
CDX-GT56UI/GT56UIW
15
3-10. OPTICAL PICK-UP SECTION
3-11. OPTICAL PICK-UP
1
2 optical pick-up section
Note: Be careful not to touch the lens and hologram
terminal when removing the optical pick-up section.
There is space at the end of the
leaf spring (OPS) to avoid
contact with the slide.
leaf spring (OPS) to avoid
contact with the slide.
5 optical pick-up
4 lead screw assy
Prevent the end of the
leaf spring (OPS) from being
in contact with the OP slide base.
leaf spring (OPS) from being
in contact with the OP slide base.
Prevent the end of the
leaf spring (OPS) from being
in contact with the OP slide base.
leaf spring (OPS) from being
in contact with the OP slide base.
1 tapping screw
(P
1.4)
2 leaf spring (OPS)
3 rack
–
bottom side view
–
Notes for Assembly
CDX-GT56UI/GT56UIW
16
MEMO
Click on the first or last page to see other CDX-GT56UI service manuals if exist.