Sony ZS-YN7L Service Manual ▷ View online
5
ZS-YN7L
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
6
GB
Playing a CD
Connect the supplied mains lead.
1
Press OPEN to open the CD lid
(direct power-on) and place the CD
on the CD tray.
(direct power-on) and place the CD
on the CD tray.
Note
Make sure that the CD is placed properly
on the CD tray. Don’t place it under the
CD tray.
on the CD tray. Don’t place it under the
CD tray.
2
Press PUSH CLOSE to close the CD
lid.
lid.
With the label side up
1
3
Basic Operations
2
Basic Operations
7
GB
Playing time
Track number
Playing time
File number
3
Press u (N on the remote).
The player plays all the tracks once.
* When playing an MP3 CD, “MP3”
appears in the display.
continued
Display
Audio CD
Audio CD
u
VOLUME +, –
x
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +*
1
, – (VOL +*
1
, – on the
remote)
stop playback
x
pause playback
u*
1
(X on the remote)
Press the button again to resume play after
pause.
pause.
go to the next track
>
go back to the
.
previous track
*
1
The button has a tactile dot.
Tips
• To listen through
headphones, connect the
headphones to the i
(headphones) jack.
headphones to the i
(headphones) jack.
• Playback starts from the
point you last stopped
playing (Resume play).
During stop, the point to be
played is displayed.
To cancel the resume play
to start play from the
beginning of the first track,
press x in stop mode.
playing (Resume play).
During stop, the point to be
played is displayed.
To cancel the resume play
to start play from the
beginning of the first track,
press x in stop mode.
File name
ATRAC CD/MP3 CD*
OPEN
>
.
+, –
Note
Before playing an ATRAC
CD/MP3 CD, this player
reads all file and group
information on the CD.
Depending on the file
structure, it may take more
than a minute to read them.
During this time, “Reading”
is displayed.
CD/MP3 CD, this player
reads all file and group
information on the CD.
Depending on the file
structure, it may take more
than a minute to read them.
During this time, “Reading”
is displayed.
OPERATE
8
GB
Notes
• If ATRAC3plus/ATRAC3
files and MP3 files are
recorded on the same CD,
this CD player plays the
ATRAC3plus/ATRAC3
only.
recorded on the same CD,
this CD player plays the
ATRAC3plus/ATRAC3
only.
• The playback capability of
this CD player may vary
depending on the quality of
the disc and the condition of
the recording device.
depending on the quality of
the disc and the condition of
the recording device.
• Characters that can be
displayed on this CD player
are listed below.
– A to Z
– a to z
– 0 to 9
– ! " # $ % & ' ( ) * + , - . / :
are listed below.
– A to Z
– a to z
– 0 to 9
– ! " # $ % & ' ( ) * + , - . / :
; < = > ? @ [ \ ] ^ _ ` { | }
~
~
If you use other characters
on you computer using
software such as
SonicStage, they are
displayed as “–” on this CD
player.
on you computer using
software such as
SonicStage, they are
displayed as “–” on this CD
player.
• On a disc that has
ATRAC3plus/ATRAC3/
MP3 files, do not save files
in other formats and do not
make unneccessary groups.
MP3 files, do not save files
in other formats and do not
make unneccessary groups.
ATRAC CD
To
Press
select a group*
2
+ to go forward and – to go
backward
select a file*
2
> to go forward and . to go
backward
backward
remove the CD
OPEN*
3
turn on/off the player
OPERATE
*
2
You can operate during play of ATRAC CDs/MP3 CDs.
*
3
Once you open the CD tray, the track to start play will change to
the beginning of the first track.
the beginning of the first track.
The structure of ATRAC CDs/MP3 CDs
ATRAC CDs/MP3 CDs consist of “files” and “groups.” A
“file” is equivalent to a “track” of an audio CD. A “group”
is a bundle of files and is equivalent to an “album.”
For MP3 CDs, this CD player recognizes an MP3 folder as
a “group” so that ATRAC CDs and MP3 CDs can be
operated in the same way.
“file” is equivalent to a “track” of an audio CD. A “group”
is a bundle of files and is equivalent to an “album.”
For MP3 CDs, this CD player recognizes an MP3 folder as
a “group” so that ATRAC CDs and MP3 CDs can be
operated in the same way.
Playing order of ATRAC CDs and MP3 CDs
For ATRAC CDs, files are played in the order selected in
SonicStage.
For MP3 CDs, the playing order may differ depending on
the method used to record MP3 files on the disc. In the
following example, files are played in order of 1 to 7.
SonicStage.
For MP3 CDs, the playing order may differ depending on
the method used to record MP3 files on the disc. In the
following example, files are played in order of 1 to 7.
File
Group
MP3 CD
Basic Operations
9
GB
Notes on ATRAC CDs
• Maximum number of groups: 255
Maximum number of files: 999
• CD-Rs/CD-RWs recorded in the ATRAC3plus/ATRAC3 format
cannot be played on your computer.
Notes on MP3 CDs
• Maximum number of groups: 100
Maximum number of files: 400
Maximum directory level: 8
Maximum directory level: 8
• A group that does not include an MP3 file is skipped.
• Be sure to add the file extension “mp3” to the file name.
• Be sure to add the file extension “mp3” to the file name.
However, if you add the file extension “mp3” to a file other than
an MP3 file, the player will not be able to recognize the file
properly.
an MP3 file, the player will not be able to recognize the file
properly.
• This player can play bit rates of 16 to 320 kbps, and sampling
frequencies of 32/44.1/ 48 kHz. Variable Bit Rate (VBR) file
can also be played.
can also be played.
• To compress a source in an MP3 file, we recommend setting the
compression parameters to “44.1 kHz,” “128 kbps,” and
“Constant Bit Rate.”
“Constant Bit Rate.”
• To record up to the maximum capacity, set the writing software
to “halting of writing.”
• To record to the maximum capacity at one time up on media that
has nothing recorded on it, set the writing software to “Disc at
Once.”
Once.”
6
ZS-YN7L
10
GB
Listening to the radio
Connect the supplied mains lead (see page 25).
1
Press RADIO•BAND•AUTO
PRESET until the band you want
appears in the display (direct power-
on).
PRESET until the band you want
appears in the display (direct power-
on).
“FM” t “MW” t “LW”
2
Press TUNE + or – and hold it until
the frequency digits begin to change
in the display.
the frequency digits begin to change
in the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
radio frequencies and stops when it
finds a clear station.
If you can’t tune in a station, press
TUNE + or – repeatedly to change
the frequency step by step.
TUNE + or – repeatedly to change
the frequency step by step.
1
2
Display
Indicates an FM
stereo broadcast
stereo broadcast
Basic Operations
11
GB
Use these buttons for additional operations
Tips
• If the FM broadcast is
noisy, press MODE until
“Mono” appears in the
display and radio will play
in monaural.
“Mono” appears in the
display and radio will play
in monaural.
To
Press
adjust the volume
VOLUME +*, – (VOL +*, – on the
remote)
remote)
turn on/off the radio
OPERATE
* The button has a tactile dot.
To improve broadcast reception
Reorient the aerial for FM. Reorient the player itself for
MW/LW.
MW/LW.
VOLUME +, –
MODE
for FM
for AM/MW/LW
OPERATE
7
ZS-YN7L
•
This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SECTION 3
DISASSEMBLY
SET
3-2. CABINET
REAR ASSY
(Page 8)
(Page 8)
3-3. CABINET
(UPPER)
(Page 8)
(Page 8)
3-6. LCD BOARD
(Page 10)
3-4. CHASSIS
SECTION
(Page 9)
(Page 9)
3-5. CD BLOCK
SECTION
(Page 9)
(Page 9)
8
ZS-YN7L
Note:
Follow the disassembly procedure in the numerical order given.
3-2. CABINET REAR ASSY
3-3. CABINET (UPPER)
7
cabinet rear assy
1
battery lid
6
connector
(CN902)
(CN902)
2
three screws
(B2.6)
(B2.6)
3
three screws
(B2.6)
(B2.6)
4
nine screws
(B2.6)
(B2.6)
5
1
three screws
(B2.6)
(B2.6)
2
three screws
(B2.6)
(B2.6)
3
handle (front)
4
flexible flat cable (6core)
(CN804)
(CN804)
6
connector
(CN301)
(CN301)
7
connector
(CN322)
(CN322)
5
flexible flat cable (3core)
(CN802)
(CN802)
8
two screws
(B2.6)
(B2.6)
9
two screws
(B2.6)
(B2.6)
0
cabinet (upper)
Click on the first or last page to see other ZS-YN7L service manuals if exist.