Sony ZS-SN10 Service Manual ▷ View online
5
ZS-SN10
Listening to the radio
Connect the supplied AC power cord.
1
Press RADIO•BAND•AUTO
PRESET repeatedly until the band
you want appears in the display
(direct power-on).
PRESET repeatedly until the band
you want appears in the display
(direct power-on).
2
Hold down TUNE + or – until the
frequency digits begin to change in
the display.
frequency digits begin to change in
the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
radio frequencies and stops when it
finds a clear station.
If you can’t tune in a station, press
TUNE + or – repeatedly to change
the frequency step by step.
TUNE + or – repeatedly to change
the frequency step by step.
1
2
Display
Indicates an FM
stereo broadcast
stereo broadcast
Use these buttons for additional operations
Tip
If the FM broadcast is noisy,
press MODE repeatedly until
“Mono” appears in the
display and radio will play in
monaural.
press MODE repeatedly until
“Mono” appears in the
display and radio will play in
monaural.
To
Press
adjust the volume
VOLUME +*, – (VOL +*, – on the
remote)
remote)
turn on/off the radio
POWER
* The button has a tactile dot.
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for
AM.
AM.
VOLUME –, +
MODE
for FM
for AM
POWER
6
ZS-SN10
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
SECTION 3
DISASSEMBLY
3-2. CABINET TOP ASSY
(Page 6)
3-6. CD BLOCK ASSY
(Page 8)
3-8. CD LID
(Page 9)
3-7. OPTICAL PICK-UP
(KSS-213C)
(Page 9)
(Page 9)
3-3. MAIN BOARD
(Page 7)
3-4. CABINET FRONT ASSY
(Page 7)
3-5. LCD BOARD
(Page 8)
SET
qa
flexible flat cable (4 core)
(CN403)
(CN403)
qs
cabinet top assy
8
6
two screws
(B3)
(B3)
1
screw (M3)
2
telescopic antenna (ANT1)
4
three screws
(B3)
(B3)
3
Open the CD lid.
5
Lift the handle.
7
three screws
(B3)
(B3)
0
wire (flat type) (23 core)
(CN102)
(CN102)
9
connector
Note:
Follow the disassembly procedure in the numerical order given.
3-2. CABINET TOP ASSY
7
ZS-SN10
3-3. MAIN BOARD
3-4. CABINET FRONT ASSY
1
connector (CN302)
6
flexible flat cable
(11 core) (CN801)
(11 core) (CN801)
7
two screws
(B2.6)
(B2.6)
2
connector (CN301)
3
connector (CN901)
5
flexible flat cable
(11 core) (CN807)
(11 core) (CN807)
4
flexible flat cable
(11 core) (CN806)
(11 core) (CN806)
8
MAIN board
4
five screws
(B3)
(B3)
5
screw (B3)
6
cabinet front assy
1
connector
(CN323)
(CN323)
2
two screws
(B3)
(B3)
3
two screws
(B3)
(B3)
8
ZS-SN10
3-5. LCD BOARD
1
four screws
(B3)
(B3)
3
four screws
(B3)
(B3)
2
speaker box (L)
4
speaker box (R)
8
LCD board
6
two screws
(B2.6)
(B2.6)
5
four screws
(B2.6)
(B2.6)
7
two screws
(B2.6)
(B2.6)
3-6. CD BLOCK ASSY
1
four screws
2
CD block assy
Click on the first or last page to see other ZS-SN10 service manuals if exist.