Sony STR-DN1060 / STR-DN860 Service Manual ▷ View online
25
STR-DN860/DN1060
7. Diag (Wireless LAN Test)
This screen performs wireless LAN/Miracast test.
This screen performs wireless LAN/Miracast test.
Screen 1: Selects Wireless LAN Test Category
Operation:
[
Operation:
[
<
]/[
,
] Selects the category
[
m
]/[ ]
Activate the selected category
[RETURN] Returns to service top menu
Screen 2: Selects Wireless LAN Test
Operation:
[1]
Operation:
[1]
Show Wireless LAN module Information (Not used)
[2]
Connect Access Point (Not used)
[3]
Start display RSSI value (Not used)
[4]
Start Ping Test (Not used)
[5]
Write P2P Address to Registry
[6]
P2P Registry Check
[M]/[
m
] Selects
Test
[ ]
Activate and Start Test
[RETURN] Returns to test category selection
Screen 2: Store P2P device address to Registry
Display will show : P2P device address : “xx:xx:xx:xx:xx:xx”
• Viewing the Status display, if
Successful : “Write Successful!”
Fail: “Write Fail!”
Display will show : P2P device address : “xx:xx:xx:xx:xx:xx”
• Viewing the Status display, if
Successful : “Write Successful!”
Fail: “Write Fail!”
Screen 3: P2P Registry Check
Show P2P device address “xx:xx:xx:xx:xx:xx”
Show P2P device address “xx:xx:xx:xx:xx:xx”
Diag
Category:
Wireless LAN Test
Diag
Category: Wireless LAN Test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5] Write P2P address to Registry
[6] P2P Registry Check
P2P device address : xx:xx:xx:xx:xx:xx
Status : Write Successful!
Status : Write Fail!
Status : Write Successful!
Status : Write Fail!
Diag
Category: Wireless LAN Test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5] Write P2P address to Registry
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5] Write P2P address to Registry
[6] P2P Registry Check
P2P device address : xx:xx:xx:xx:xx:xx
HELP: [UP] [DOWN] [ENT] [RET]
(Screen 1)
(Screen 2)
(Screen 3)
8. Diag (MIC Input Test)
This screen performs MIC input test.
This screen performs MIC input test.
Note: Not used for the servicing.
9. Diag (HDMI Input Test)
This screen performs HDMI input test.
This screen performs HDMI input test.
Note: Not used for the servicing.
10. Diag (Transcoder Test)
Note: Not used for the servicing.
11. Diag (Bluetooth Device Test)
This screen performs Bluetooth Device Test.
This screen performs Bluetooth Device Test.
Screen 1: Select Bluetooth Device Test Category
Operation:
[
Operation:
[
<
]/[
,
] Selects the category
[ ]
Activate the selected category
[RETURN] Returns to the service top menu
Screen 2: Select Bluetooth Device Test
Operation:
[1] Bluetooth
Operation:
[1] Bluetooth
Enable
[2] Bluetooth
Disable
[3]
Write Bluetooth device address to Registry.
[4] Bluetooth
Inquiry
Test
[M]/[
m
] Selects
Device
[ ]
Activate and Start Test
[RETURN] Returns to the selection of test category
Screen 2: Select [1] Bluetooth Enable
• Viewing the Status display, if
• Viewing the Status display, if
Successful: “Bluetooth Enable Successful!”
Fail: “Bluetooth Enable Fail!”
Screen 3: Select [2] Bluetooth Disable
• Viewing the Status display, if
• Viewing the Status display, if
Successful: “Bluetooth Disable Successful!”
Fail: “Bluetooth Disable Fail!”
Screen 4: Select [3] Write Bluetooth device address to
Registry
Display will show : Bluetooth device address : “xx:xx:xx:xx:xx:xx”
• Viewing the Status display, if
Registry
Display will show : Bluetooth device address : “xx:xx:xx:xx:xx:xx”
• Viewing the Status display, if
Successful: “Write Successful!”
Fail: “Write Fail!”
Ver. 1.2
STR-DN860/DN1060
26
Diag
Category:
Bluetooth Device Test
Diag
Category: Bluetooth Device Test
[1] Bluetooth Enable
[2] Bluetooth Disable
[3] Write Bluetooth device address to Registry
[4] Bluetooth Inquiry Test (not used)
[3] Write Bluetooth device address to Registry
[4] Bluetooth Inquiry Test (not used)
Status : Bluetooth Enable Successful!
Status : Bluetooth Enable Fail!
HELP: [UP] [DOWN] [ENT] [RET]
(Screen 1)
(Screen 2)
(Screen 3)
Diag
Category: Bluetooth Device Test
[1] Bluetooth Enable
[2] Bluetooth Disable
[3] Write Bluetooth device address to Registry
[4] Bluetooth Inquiry Test (not used)
[4] Bluetooth Inquiry Test (not used)
Status : Bluetooth Disable Successful!
Status : Bluetooth Disable Fail!
HELP: [UP] [DOWN] [ENT] [RET]
(Screen 4)
Diag
Category: Bluetooth Device Test
[1] Bluetooth Enable
[2] Bluetooth Disable
[2] Bluetooth Disable
[3] Write Bluetooth device address to Registry
[4] Bluetooth Inquiry Test (not used)
Bluetooth device address : 00:01:36:23:FD:CF
Status : Write Successful!
Status : Write Fail!
HELP: [UP] [DOWN] [ENT] [RET]
12. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
This screen displays the contents of each log.
Note: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[1]/[ ]
Operation:
[1]/[ ]
Moves to the Error Log output screen
[RETURN] Returns to the top menu of the service mode
Screen 2: Displays the Error Log
Operation:
[
Operation:
[
<
]
Returns to the previous page
[
,
]
Moves to the next page
[RETURN] Returns to the screen (Screen 1) that selects the log
type
[RED]
Writes the log contents to an USB memory device
• Viewing the log display
Error Log:
Error Log:
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[Index number] [Date] [Time] [Error code]
About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Note: Please do not press the [RED] button immediately after USB
memory is inserted.
Please do not pull out USB memory immediately after the [RED]
button was pressed.
button was pressed.
Error Log:
When
When
“getErrLogFile.trm
fi le” exists in the USB memory
device, errlog.log fi le is output.
Select Log
HELP : [DOWN][ENT][(NUM)]
Error Log
02]
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[175] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[176] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[177] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[178] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[179] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[180] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[181] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[175] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[176] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[177] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[178] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[179] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[180] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[181] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[182] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[183] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[184] 2010/01/01 00:00:07 [ErrCode:0902A4053002]
[185] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[186] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[183] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[184] 2010/01/01 00:00:07 [ErrCode:0902A4053002]
[185] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[186] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
<Page 1/20>
HELP : Press [RED] key to store log to Udisc.
[1] Error Log
(Screen 1)
(Screen 2)
Ver. 1.2
27
STR-DN860/DN1060
13. Factory Initialize (Factory Settings)
Return all of the unit setting to their factory defaults.
Operation:
1. Press the [
Return all of the unit setting to their factory defaults.
Operation:
1. Press the [
?/1
] button to turn the power on.
2. While pressing [DISPLAY MODE] button, press and release
the [MUSIC], [A.F.D/2CH], [MOVIE] button in order, the
message “SERVICE IN” appears.
message “SERVICE IN” appears.
3. Enter the SVC service mode. The OSD menu on TV monitor
can be operated by remote commander.
4. Select Factory Initialize. (go to Screen 1).
5. The set will turn off automatically.
5. The set will turn off automatically.
Service Mode Menu
[1] Diag
[2] Log
[2] Log
[3] Factory Initialize
[4] Network --> Not Support In This Model
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive --> Not Support In This Model
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive --> Not Support In This Model
[9] HDD mode
[10] RF Test Mode
HELP: [DOWN] [ENT]
(Screen 1)
14. Network (Network Test Diagnosis Screen: Ifconfi g)
Network menu for the wired ethernet.
Network menu for the wired ethernet.
Note: Not used for the servicing.
15. Network (Network Test Diagnosis Screen: Ping)
Ping test for the wired ethernet.
Ping test for the wired ethernet.
Note: Not used for the servicing.
16. Version Up Test (Disc Update)
This screen performs version update test.
This screen performs version update test.
Note: Not used for the servicing.
17. System Information (System Information Display)
This screen displays system information.
This screen displays system information.
Screen 1: Basic Information
Operation:
[,]
Operation:
[,]
Basic Information displayed (go to Screen 2)
[RETURN] Returns to service top menu
Screen 2: Basic Information (continue)
Operation:
[
Operation:
[
<
]
Basic Information displayed (go to Screen 1)
[RETURN] Returns to service top menu
When delta IOP is measured, it becomes impossible to use the
Version Up function.
Version Up function.
Contents List:
Main LSIname
Model
Destination
Sequence Number
MAC
IP
IF-con Main Version
IFCon ADSP Coeff Version
Bootloader Version
Host Main Version
MicroBE Version
Host Sub Version
Middleware Version
ADSP Version
ADSP Coeff Version
2nd DSP Version
ADSP Version
Main LSIname
Model
Destination
Sequence Number
MAC
IP
IF-con Main Version
IFCon ADSP Coeff Version
Bootloader Version
Host Main Version
MicroBE Version
Host Sub Version
Middleware Version
ADSP Version
ADSP Coeff Version
2nd DSP Version
ADSP Version
IF_MODEL
IF_DEST
WLAN module Serial
WLAN module hw version
WLAN module MAC Address
Drive Firm Revision
IF_DEST
WLAN module Serial
WLAN module hw version
WLAN module MAC Address
Drive Firm Revision
System Information
Sequence Number:
MAC:
MAC:
Model:
Destination:
Destination:
Main LSIname:
IP:
IFCon ADSP Coeff Version:
IF-con Main Version:
Host Main Version:
Bootloader Version:
MicroBE Version:
Host Sub Version:
Middleware Version:
ADSP Version:
Host Sub Version:
Middleware Version:
ADSP Version:
ADSP Coeff Version:
2nd DSP Version:
ADSP Version:
2nd DSP Version:
ADSP Version:
HELP: [RET] [RIGHT]
(Screen 1)
System Information
Drive Firm Revision:
WLAN module MAC Address:
WLAN module Serial:
WLAN module hw version:
WLAN module hw version:
IF_MODEL:
IF_DEST:
IF_DEST:
Bluetooth Device Address:
HELP: [RET] [LEFT]
(Screen 2)
18. Drive
This menu is used to operate the drive using drive-related diagnos-
tic and tools.
This menu is used to operate the drive using drive-related diagnos-
tic and tools.
Note: Not used for the servicing.
Ver. 1.2
STR-DN860/DN1060
28
SECTION 4
FM TUNER CHECK
FM AUTO STOP CHECK
signal
generator
set
Procedure:
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
input directly.
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation
Deviation
: 75 kHz
Modulation
: 1 kHz
ANT input
: 35 dBu (EMF)
Note:
Use 75 ohm coaxial cable to connect signal generator and the
set. You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and scan the input FM signal with
automatic scanning.
4. Confi rm that input frequency of A, B and C are detected and
automatic scanning stops.
When the station signal is received in good condition, automatic
scanning stops.
scanning stops.
Click on the first or last page to see other STR-DN1060 / STR-DN860 service manuals if exist.