Sony STR-DN1060 / STR-DN860 Service Manual ▷ View online
SERVICE MANUAL
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
STR-DN860/DN1060
MULTI CHANNEL AV RECEIVER
9-890-661-03
2015I80-1
©
2015.09
Ver. 1.2 2015.09
US Model
Canadian Model
AEP Model
UK Model
Australian Model
STR-DN860/DN1060
Singapore Model
STR-DN1060
Taiwan Model
STR-DN860
– Continued on next page –
Photo: STR-DN1060
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby Labo-
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby Labo-
ratories. Dolby, Pro Logic, Surround EX, and
the double-D symbol are trademarks of Dolby
Laboratories.
the double-D symbol are trademarks of Dolby
Laboratories.
** For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited. DTS, DTS-HD, the
Symbol, & DTS and the Symbol together are
registered trademarks, and DTS-HD Master
Audio is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
Licensing Limited. DTS, DTS-HD, the
Symbol, & DTS and the Symbol together are
registered trademarks, and DTS-HD Master
Audio is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
This receiver incorporates High-Definition
Multimedia Interface (HDMI™) technology.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Multimedia Interface (HDMI™) technology.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Apple, the Apple logo, AirPlay, iPad, iPhone,
iPod, iPod classic, iPod nano, iPod touch,
and Retina are trademarks of Apple Inc.,
registered in the U.S. and other countries.
iPad Air and iPad mini are trademarks of Apple Inc.
App Store is a service mark of Apple Inc.
iPod, iPod classic, iPod nano, iPod touch,
and Retina are trademarks of Apple Inc.,
registered in the U.S. and other countries.
iPad Air and iPad mini are trademarks of Apple Inc.
App Store is a service mark of Apple Inc.
All other trademarks and registered trademarks
are of their respective holders. In this manual, ™
and ® marks are not specified.
are of their respective holders. In this manual, ™
and ® marks are not specified.
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone,
or iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the use of
this accessory with iPod, iPhone, or iPad may
affect wireless performance.
for iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone,
or iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the use of
this accessory with iPod, iPhone, or iPad may
affect wireless performance.
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
trademark of Microsoft Corporation in the United
States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use
or distribution of such technology outside of
this product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
property rights of Microsoft Corporation. Use
or distribution of such technology outside of
this product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
The LDAC™ name and logo is a trademark of
Sony Corporation.
Sony Corporation.
“DSEE HX” is a trademark of Sony Corporation.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
patents licensed from Fraunhofer IIS and
Thomson.
“x.v.Color (x.v.Colour)” and “x.v.Color
(x.v.Colour)” logo are trademarks of Sony
Corporation.
(x.v.Colour)” logo are trademarks of Sony
Corporation.
“BRAVIA” is a trademark of Sony Corporation.
“PlayStation” is a registered trademark of Sony
Computer Entertainment Inc.
Computer Entertainment Inc.
“WALKMAN” and “WALKMAN” logo are
registered trademarks of Sony Corporation.
registered trademarks of Sony Corporation.
MICROVAULT is a trademark of Sony Corpora-
tion.
tion.
WPA™ and WPA2™ are trademarks of Wi-Fi
Alliance
Alliance
®
.
The Wi-Fi CERTIFIED™ Logo is a certification
mark of Wi-Fi Alliance
mark of Wi-Fi Alliance
®
.
MHL, Mobile High-Definition Link and the
MHL Logo are trademarks or registered trade-
marks of MHL Licensing, LLC.
MHL Logo are trademarks or registered trade-
marks of MHL Licensing, LLC.
The BLUETOOTH
®
word mark and logos
are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
trademark of NFC Forum, Inc. in the United
States and in other countries.
Android™ is a trademark of Google Inc.
Google Play™ is a trademark of Google Inc.
Notice on End User License
Agreement (EULA)
For details of the EULA for this product, see
page 14.
For details of the EULA for network services,
please refer to [License agreement] in options
menu on each network service icon.
For details of the GPL, LGPL and other software
licenses, please refer to [Software License
Information] in [System Settings] of the [Setup]
menu on this product.
Agreement (EULA)
For details of the EULA for this product, see
page 14.
For details of the EULA for network services,
please refer to [License agreement] in options
menu on each network service icon.
For details of the GPL, LGPL and other software
licenses, please refer to [Software License
Information] in [System Settings] of the [Setup]
menu on this product.
This product contains software that is subject
to the GNU General Public License (“GPL”) or
GNU Lesser General Public License (“LGPL”).
These establish that customers have the right to
acquire, modify, and redistribute the source code
of said software in accordance with the terms of
the GPL or the LGPL.
to the GNU General Public License (“GPL”) or
GNU Lesser General Public License (“LGPL”).
These establish that customers have the right to
acquire, modify, and redistribute the source code
of said software in accordance with the terms of
the GPL or the LGPL.
The source code for the software used in this
product is subject to the GPL and LGPL, and is
available on the Web.
To download, please access the following:
URL:
http://oss.sony.net/Products/Linux
Please note that Sony cannot answer or respond to
any inquiries regarding the content of this source
code.
product is subject to the GPL and LGPL, and is
available on the Web.
To download, please access the following:
URL:
http://oss.sony.net/Products/Linux
Please note that Sony cannot answer or respond to
any inquiries regarding the content of this source
code.
End User License Information
REAL END USER LICENSE
AGREEMENT (Taiwan models only)
1.
AGREEMENT (Taiwan models only)
1.
End users are prohibited from modifying,
translating, reverse engineering, decompiling,
disassembling or using other means to discover
the software developed by Real or otherwise
replicate the functionality of the software,
except to the extent that this restriction is
expressly prohibited by applicable law.
translating, reverse engineering, decompiling,
disassembling or using other means to discover
the software developed by Real or otherwise
replicate the functionality of the software,
except to the extent that this restriction is
expressly prohibited by applicable law.
2. Real disclaims all warranties and conditions,
express and implied, including implied
warranties or conditions of merchantability
and fitness for a particular purpose; and
effectively exclude all liability for indirect,
special, incidental and consequential damages,
including but not limited to lost profits or
replacement systems.
warranties or conditions of merchantability
and fitness for a particular purpose; and
effectively exclude all liability for indirect,
special, incidental and consequential damages,
including but not limited to lost profits or
replacement systems.
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(US models only)
HARMONIC DISTORTION:
(US models only)
STR-DN1060:
With 6 ohm loads, both channels driven, from
20 Hz – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milli-
watts to rated output.
With 6 ohm loads, both channels driven, from
20 Hz – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milli-
watts to rated output.
STR-DN860:
With 6 ohm loads, both channels driven, from
20 Hz – 20,000 Hz; rated 95 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milli-
watts to rated output.
With 6 ohm loads, both channels driven, from
20 Hz – 20,000 Hz; rated 95 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milli-
watts to rated output.
Amplifier section
STR-DN1060
US, Canadian, Australian and Taiwan models
STR-DN1060
US, Canadian, Australian and Taiwan models
1)
:
Minimum RMS Output Power
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W
Stereo Mode Output Power
(6 ohms, 1 kHz, THD 1%)
(6 ohms, 1 kHz, THD 1%)
120 W + 120 W
Surround Mode Output Power
2)
(6 ohms, 1 kHz, THD 0.9%)
165 W per channel
Singapore models
1)
:
Minimum RMS Output Power
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W
Stereo Mode Output Power
(6 ohms, 1 kHz, THD 1%)
(6 ohms, 1 kHz, THD 1%)
120 W + 120 W
Surround Mode Output Power
2)
(6 ohms, 1 kHz, THD 0.9%)
150 W per channel
STR-DN860
Minimum RMS Output Power
Minimum RMS Output Power
1)
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
95 W + 95 W
Stereo Mode Output Power
1)
(6 ohms, 1 kHz, THD 1%)
110 W + 110 W
Surround Mode Output Power
1)2)
(6 ohms, 1 kHz, THD 0.9%)
150 W per channel
1)
Measured under the following conditions:
Area
Power requirements
US, Canadian,
Taiwan
Taiwan
120 V AC, 60 Hz
Australian,
Singapore, AEP, UK
Singapore, AEP, UK
230 V AC, 50 Hz
2)
Reference power output for front, center, sur-
round, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Analog
Analog
10 Hz – 100 kHz, +0.5/–2 dB (with
sound field and equalizer bypassed)
sound field and equalizer bypassed)
Input
Analog
Analog
Sensitivity: 500 mV/50 kilohms
S/N
3)
: 105 dB (A, 500 mV
4)
)
Digital
(Coaxial)
Impedance: 75 ohms
S/N: 100 dB (A, 20 kHz LPF)
Digital
(Optical)
S/N: 100 dB (A, 20 kHz LPF)
Output (Analog)
ZONE
ZONE
2
5)
Voltage: 2 V/1 kilohm
SUBWOOFER
Voltage: 2 V/1 kilohm
Equalizer
Gain
Gain
levels
±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
5)
STR-DN1060 only.
FM tuner section
Tuning range
Tuning range
US and Canadian models:
87.5 MHz – 108.0 MHz (100 kHz step)
Other
models:
87.5 MHz – 108.0 MHz (50 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Video section
Inputs/Outputs
Video:
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
COMPONENT
VIDEO*:
Y: 1 Vp-p, 75 ohms
P
B
: 0.7 Vp-p, 75 ohms
P
R
: 0.7 Vp-p, 75 ohms
80 MHz HD Standby Through
* STR-DN1060 only.
STR-DN860/DN1060
2
HDMI Video
Input/Output (HDMI Repeater block)
STR-DN1060: HDMI IN SAT/CATV (MHL) and HDMI OUT A (TV) jacks support HDCP 2.2 protocol.
STR-DN860: HDMI IN SAT/CATV (MHL) and HDMI TV OUT jacks support HDCP 2.2 protocol.
HDCP 2.2 is newly enhanced copyright protection technology that is used to protect content such as 4K movies.
STR-DN1060: HDMI IN SAT/CATV (MHL) and HDMI OUT A (TV) jacks support HDCP 2.2 protocol.
STR-DN860: HDMI IN SAT/CATV (MHL) and HDMI TV OUT jacks support HDCP 2.2 protocol.
HDCP 2.2 is newly enhanced copyright protection technology that is used to protect content such as 4K movies.
Format
2D
3D
Frame
packing
Side-by-Side
(Half)
Over-Under
(Top-and-Bottom)
4096 × 2160p @ 59.94/60 Hz
a
1)
–
–
–
4096 × 2160p @ 50 Hz
a
1)
–
–
–
3840 × 2160p @ 59.94/60 Hz
a
1)
–
–
–
3840 × 2160p @ 50 Hz
a
1)
–
–
–
4096 × 2160p @ 23.98/24 Hz
a
2)4)
–
–
–
3840 × 2160p @ 29.97/30 Hz
a
2)4)
–
–
–
3840 × 2160p @ 25 Hz
a
2)4)
–
–
–
3840 × 2160p @ 23.98/24 Hz
a
2)4)
–
–
–
1920 × 1080p @ 59.94/60 Hz
a
4)
–
a
4)
a
4)
1920 × 1080p @ 50 Hz
a
4)
–
a
4)
a
4)
1920 × 1080p @ 29.97/30 Hz
a
3)
a
4)
a
3)
a
3)
1920 × 1080p @ 25 Hz
a
3)
a
4)
a
3)
a
3)
1920 × 1080p @ 23.98/24 Hz
a
3)
a
4)
a
3)
a
3)
1920 × 1080i @ 59.94/60 Hz
a
3)
a
a
3)
a
3)
1920 × 1080i @ 50 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 59.94/60 Hz
a
3)
a
4)
a
3)
a
3)
1280 × 720p @ 50 Hz
a
3)
a
4)
a
3)
a
3)
1280 × 720p @ 29.97/30 Hz
a
3)
a
4)
a
3)
a
3)
1280 × 720p @ 23.98/24 Hz
a
3)
a
4)
a
3)
a
3)
720 × 480p @ 59.94/60 Hz
a
3)
–
–
–
720 × 576p @ 50 Hz
a
3)
–
–
–
640 × 480p @ 59.94/60 Hz
a
3)
–
–
–
1)
Supports YUV 4:2:0 / 8 bit format only.
2)
Supports 8 bit format only.
3)
These formats are also supported by MHL 2 and MHL 3
connection.
4)
These formats are also supported by an MHL 3 connection.
MHL section
Supported MHL version
Supported MHL version
Incorporates MHL 2 (front)*, MHL 3 (rear)
Maximum current
900
900
mA
* STR-DN1060 only.
iPhone/iPad/iPod section
DC 5V 1.0 A MAX
USB works with iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c,
iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G, iPod
touch (2nd through 5th generation), iPod classic, and iPod nano
(3rd through 7th generation).
iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G, iPod
touch (2nd through 5th generation), iPod classic, and iPod nano
(3rd through 7th generation).
BLUETOOTH technology works with iPhone 6, iPhone 6 Plus,
iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone
3GS, and iPod touch (4th and 5th generation).
iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone
3GS, and iPod touch (4th and 5th generation).
AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3
or later, Mac with OS X Mountain Lion or later, and PC with
iTunes 10.2.2 or later.
or later, Mac with OS X Mountain Lion or later, and PC with
iTunes 10.2.2 or later.
You can use “SongPal” app with this receiver via BLUETOOTH
or network connection.
or network connection.
You can only charge the iPhone/iPod when they are connected to
the USB port while the receiver is turned on.
the USB port while the receiver is turned on.
USB section
(USB) port:
Type A (For connecting USB memory)
NETWORK section
Ethernet LAN
100BASE-TX
Wireless LAN
Compatible
Ethernet LAN
100BASE-TX
Wireless LAN
Compatible
standards:
IEEE 802.11 a/b/g/n
Security:
WPA/WPA2-PSK,
WPA/WPA2-PSK,
WEP
Radio
frequency:
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH
Communication system
BLUETOOTH
Specifi cation version 3.0
Output
BLUETOOTH
BLUETOOTH
Specifi cation Power
Class
1
Maximum communication range
Line of sight approx. 30 m (98.4 feet)
1)
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profi les
2)
A2DP 1.2 (Advanced Audio Distribution Profi le)
AVRCP 1.5 (Audio Video Remote Control Profi le)
SPP (Serial Port Profi le)
Supported Codecs
3)
SBC
4)
, AAC, LDAC
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz, 48 Hz,
88.2 kHz, 96 kHz)
88.2 kHz, 96 kHz)
1)
The actual range will vary depending on factors such as
obstacles between devices, magnetic fi elds around a microwave
oven, static electricity, cordless phone, reception sensitivity,
antenna’s performance, operating system, software application,
etc.
oven, static electricity, cordless phone, reception sensitivity,
antenna’s performance, operating system, software application,
etc.
2)
BLUETOOTH standard profi les indicate the purpose of BLUE-
TOOTH communication between devices.
3)
Codec: Audio signal compression and conversion format
4)
Subband Codec
General
Power requirements
Power requirements
Area
Power requirements
US, Canadian,
Taiwan
Taiwan
120 V AC, 60 Hz
Australian
230 V AC, 50 Hz
Singapore
220 V ‒ 240 V AC, 50/60 Hz
AEP, UK
230 V AC, 50/60 Hz
Power consumption
240
240
W
Power consumption (during standby mode)
STR-DN1060:
STR-DN1060:
0.3 W (When [Control for HDMI], [Standby Through],
[Remote Start], [Bluetooth Standby] and all zone power
are set to [Off].)
0.8 W (When [Control for HDMI] is set to [On],
and [Standby Through], [Remote Start], [Bluetooth
Standby] and all zone power are set to [Off].)
1.7 W (When [Control for HDMI] and [Bluetooth
Standby] are set to [On], and [Standby Through],
[Remote Start] and all zone power are set to [Off].)
[Remote Start], [Bluetooth Standby] and all zone power
are set to [Off].)
0.8 W (When [Control for HDMI] is set to [On],
and [Standby Through], [Remote Start], [Bluetooth
Standby] and all zone power are set to [Off].)
1.7 W (When [Control for HDMI] and [Bluetooth
Standby] are set to [On], and [Standby Through],
[Remote Start] and all zone power are set to [Off].)
STR-DN860:
0.3 W (When [Control for HDMI], [Standby Through],
[Remote Start] and [Bluetooth Standby] are set to
[Off].)
[Remote Start] and [Bluetooth Standby] are set to
[Off].)
0.5 W (When [Control for HDMI] is set to [On], and
[Standby Through], [Remote Start] and [Bluetooth
Standby] are set to [Off].)
[Standby Through], [Remote Start] and [Bluetooth
Standby] are set to [Off].)
1.7 W (When [Control for HDMI] and [Bluetooth
Standby] are set to [On], and [Standby Through] and
[Remote Start] are set to [Off].)
Standby] are set to [On], and [Standby Through] and
[Remote Start] are set to [Off].)
Dimensions (width/height/depth)
(Approx.)
STR-DN1060:
(Approx.)
STR-DN1060:
430 mm × 172 mm × 329.4 mm
(17 in × 6 7/8 in × 13 in)
including projecting parts and controls
STR-DN860:
430 mm × 156 mm × 329.4 mm
(17 in × 6 1/4 in × 13 in)
including projecting parts and controls
Mass (Approx.)
STR-DN1060:
STR-DN1060:
10.4 kg (22 lb 15 oz)
STR-DN860:
8.3 kg (18 lb 5 oz)
Design and specifi cations are subject to change without notice.
Supplied accessories
• Startup
Guide
• Reference Guide (specifications and precautions)
• Remote control (1)
• R03 (size-AAA) batteries (2)
• Optimizer microphone (1)
• FM wire antenna (aerial) (1)
Ver. 1.2
STR-DN860/DN1060
3
NOTES ON CHIP COMPONENT REPLACEMENT
•
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be damaged
by heat.
by heat.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
After correcting the original service problem, perform the following
safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2 V AC range are suitable. (See
Fig. A)
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2 V AC range are suitable. (See
Fig. A)
1.5 k
Ω
0.15
μF
AC
voltmeter
(0.75 V)
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Parts on Set
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
STR-DN860/DN1060
4
1.
SERVICING NOTES
............................................. 5
2. DISASSEMBLY
2-1. Disassembly
Flow
........................................................... 9
2-2. Case (Entry) (DN860) ..................................................... 10
2-3. Case (Stepup) (DN1060) ................................................ 10
2-4. Card WLAN/BT COMBO (DN860)............................... 11
2-5. Card WLAN/BT COMBO (DN1060)............................. 12
2-6. MB-1409 Board (DN860) ............................................... 13
2-7. MB-1409 Board (DN1060) ............................................. 14
2-8. Front Panel Section ......................................................... 15
2-9. Back Panel Section (DN860) .......................................... 16
2-10. Back Panel Section (DN1060) ........................................ 17
2-11. STANDBY Board, MAIN Board Section ....................... 18
2-12. MAIN Board ................................................................... 19
2-3. Case (Stepup) (DN1060) ................................................ 10
2-4. Card WLAN/BT COMBO (DN860)............................... 11
2-5. Card WLAN/BT COMBO (DN1060)............................. 12
2-6. MB-1409 Board (DN860) ............................................... 13
2-7. MB-1409 Board (DN1060) ............................................. 14
2-8. Front Panel Section ......................................................... 15
2-9. Back Panel Section (DN860) .......................................... 16
2-10. Back Panel Section (DN1060) ........................................ 17
2-11. STANDBY Board, MAIN Board Section ....................... 18
2-12. MAIN Board ................................................................... 19
3.
TEST MODE
............................................................ 20
4.
FM TUNER CHECK
............................................. 28
5. TROUBLESHOOTING
.......................................... 29
6. DIAGRAMS
6-1. Block Diagram - ANALOG AUDIO Section - ............... 35
6-2. Block Diagram - DIGITAL Section (1/2) - ..................... 36
6-3. Block Diagram - DIGITAL Section (2/2) - ..................... 37
6-4. Block Diagram - AMP Section - ..................................... 38
6-5. Block Diagram - ANALOG VIDEO/USB Section - ...... 39
6-6. Block Diagram - DIGITAL VIDEO Section - ................ 40
6-7. Block Diagram - DISPLAY/POWER Section - .............. 41
6-8. Printed
6-2. Block Diagram - DIGITAL Section (1/2) - ..................... 36
6-3. Block Diagram - DIGITAL Section (2/2) - ..................... 37
6-4. Block Diagram - AMP Section - ..................................... 38
6-5. Block Diagram - ANALOG VIDEO/USB Section - ...... 39
6-6. Block Diagram - DIGITAL VIDEO Section - ................ 40
6-7. Block Diagram - DISPLAY/POWER Section - .............. 41
6-8. Printed
Wiring
Board
- MB-1409 Board - (Component side) - ......................... 43
6-9. Printed
Wiring
Board
- MB-1409 Board - (Conductor side) - ........................... 44
6-10. Schematic Diagram - MB-1409 Board (1/18) - .............. 45
6-11. Schematic Diagram - MB-1409 Board (2/18) - .............. 46
6-12. Schematic Diagram - MB-1409 Board (3/18) - .............. 47
6-13. Schematic Diagram - MB-1409 Board (4/18) - .............. 48
6-14. Schematic Diagram - MB-1409 Board (5/18) - .............. 49
6-15. Schematic Diagram - MB-1409 Board (6/18) - .............. 50
6-16. Schematic Diagram - MB-1409 Board (7/18) - .............. 51
6-17. Schematic Diagram - MB-1409 Board (8/18) - .............. 52
6-18. Schematic Diagram - MB-1409 Board (9/18) - .............. 53
6-19. Schematic Diagram - MB-1409 Board (10/18) - ............ 54
6-20. Schematic Diagram - MB-1409 Board (11/18) - ............ 55
6-21. Schematic Diagram - MB-1409 Board (12/18) - ............ 56
6-22. Schematic Diagram - MB-1409 Board (13/18) - ............ 57
6-23. Schematic Diagram - MB-1409 Board (14/18) - ............ 58
6-24. Schematic Diagram - MB-1409 Board (15/18) - ............ 59
6-25. Schematic Diagram - MB-1409 Board (16/18) - ............ 60
6-26. Schematic Diagram - MB-1409 Board (17/18) - ............ 61
6-27. Schematic Diagram - MB-1409 Board (18/18) - ............ 62
6-28. Printed Wiring Board
6-11. Schematic Diagram - MB-1409 Board (2/18) - .............. 46
6-12. Schematic Diagram - MB-1409 Board (3/18) - .............. 47
6-13. Schematic Diagram - MB-1409 Board (4/18) - .............. 48
6-14. Schematic Diagram - MB-1409 Board (5/18) - .............. 49
6-15. Schematic Diagram - MB-1409 Board (6/18) - .............. 50
6-16. Schematic Diagram - MB-1409 Board (7/18) - .............. 51
6-17. Schematic Diagram - MB-1409 Board (8/18) - .............. 52
6-18. Schematic Diagram - MB-1409 Board (9/18) - .............. 53
6-19. Schematic Diagram - MB-1409 Board (10/18) - ............ 54
6-20. Schematic Diagram - MB-1409 Board (11/18) - ............ 55
6-21. Schematic Diagram - MB-1409 Board (12/18) - ............ 56
6-22. Schematic Diagram - MB-1409 Board (13/18) - ............ 57
6-23. Schematic Diagram - MB-1409 Board (14/18) - ............ 58
6-24. Schematic Diagram - MB-1409 Board (15/18) - ............ 59
6-25. Schematic Diagram - MB-1409 Board (16/18) - ............ 60
6-26. Schematic Diagram - MB-1409 Board (17/18) - ............ 61
6-27. Schematic Diagram - MB-1409 Board (18/18) - ............ 62
6-28. Printed Wiring Board
- MAIN Board - (Component side) - .............................. 63
6-29. Printed Wiring Board
- MAIN Board - (Conductor side) - ................................ 64
6-30. Schematic Diagram - MAIN Board (1/5) - ..................... 65
6-31. Schematic Diagram - MAIN Board (2/5) - ..................... 66
6-32. Schematic Diagram - MAIN Board (3/5) - ..................... 67
6-33. Schematic Diagram - MAIN Board (4/5) - ..................... 68
6-34. Schematic Diagram - MAIN Board (5/5) - ..................... 69
6-31. Schematic Diagram - MAIN Board (2/5) - ..................... 66
6-32. Schematic Diagram - MAIN Board (3/5) - ..................... 67
6-33. Schematic Diagram - MAIN Board (4/5) - ..................... 68
6-34. Schematic Diagram - MAIN Board (5/5) - ..................... 69
TABLE OF CONTENTS
6-35. Printed Wiring Boards - PANEL Section - ..................... 70
6-36. Schematic Diagram - PANEL Section - .......................... 71
6-37. Printed Wiring Board - DCDC Board - .......................... 72
6-38. Schematic Diagram - DCDC Board - ............................. 73
6-39. Printed Wiring Board - STANDBY Board - ................... 74
6-40. Schematic Diagram - STANDBY Board - ...................... 75
6-41. Printed Wiring Board - FRONTJACK Board - .............. 76
6-42. Schematic Diagram - FRONTJACK Board - ................. 76
6-43. Printed Wiring Board
6-36. Schematic Diagram - PANEL Section - .......................... 71
6-37. Printed Wiring Board - DCDC Board - .......................... 72
6-38. Schematic Diagram - DCDC Board - ............................. 73
6-39. Printed Wiring Board - STANDBY Board - ................... 74
6-40. Schematic Diagram - STANDBY Board - ...................... 75
6-41. Printed Wiring Board - FRONTJACK Board - .............. 76
6-42. Schematic Diagram - FRONTJACK Board - ................. 76
6-43. Printed Wiring Board
- FRONT HDMI Board (DN1060) - ............................... 76
6-44. Schematic Diagram
- FRONT HDMI Board (DN1060) - ............................... 77
6-45. Printed Wiring Board - POWERKEY Board -................ 77
6-46. Schematic Diagram - POWERKEY Board - .................. 77
6-47. Printed Wiring Board - HP Board - ................................. 78
6-48. Schematic Diagram - HP Board - ................................... 78
6-46. Schematic Diagram - POWERKEY Board - .................. 77
6-47. Printed Wiring Board - HP Board - ................................. 78
6-48. Schematic Diagram - HP Board - ................................... 78
7.
EXPLODED VIEWS
7-1. Case
Section
....................................................................
120
7-2. MB-1409 Board (DN860) ............................................... 121
7-3. MB-1409 Board (DN1060) ............................................. 122
7-4. Front Panel Section ......................................................... 123
7-5. Back Panel Section ......................................................... 124
7-6. Chassis Section (DN860) ................................................ 125
7-7. Chassis Section (DN1060) .............................................. 126
7-3. MB-1409 Board (DN1060) ............................................. 122
7-4. Front Panel Section ......................................................... 123
7-5. Back Panel Section ......................................................... 124
7-6. Chassis Section (DN860) ................................................ 125
7-7. Chassis Section (DN1060) .............................................. 126
8.
ELECTRICAL PARTS LIST
.............................. 127