Sony STR-DA5400ES Service Manual ▷ View online
STR-DA5400ES
13
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
Main remote commander
(RM-AAL013/RM-AAL014)
(RM-AAL013/RM-AAL014)
The RM-AAL013 remote is supplied with the
U.S.A./Canadian model only and RM-
AAL014 is supplied with the European model
only. The RM-AAL013 remote is used for
illustration purpose. Any differences in
operation are clearly indicated in the text, for
example, “European model only.”
U.S.A./Canadian model only and RM-
AAL014 is supplied with the European model
only. The RM-AAL013 remote is used for
illustration purpose. Any differences in
operation are clearly indicated in the text, for
example, “European model only.”
Remote commander
Name
Function
" AV / (on/
standby)
Press to turn on or off the audio/
video components that the
remote is assigned to operate.
video components that the
remote is assigned to operate.
If you press
/ () button at
the same time, it will turn off
the receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV
the receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV
/
switch changes automatically
each time you press the input
button (
each time you press the input
button (
).
# / (on/
standby)
Press to turn the receiver on or
off.
If zone 2 or zone 3 is selected,
only the main receiver is turned
on or off with this button. To
turn off all components
including an amplifier in zone 2
or zone 3, press
off.
If zone 2 or zone 3 is selected,
only the main receiver is turned
on or off with this button. To
turn off all components
including an amplifier in zone 2
or zone 3, press
/ and AV /
() at the same time
(SYSTEM STANDBY).
(SYSTEM STANDBY).
Saving the power in
standby mode.
standby mode.
When “Control for HDMI”
and “RS-232C Control” are
set to “OFF.”
and “RS-232C Control” are
set to “OFF.”
& Input
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can program
the remote to control non-Sony
components following the steps
in “Programming the remote”.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can program
the remote to control non-Sony
components following the steps
in “Programming the remote”.
' TV INPUT
Press TV (
XG), then press TV
INPUT to select the input signal
of a TV.
of a TV.
( WIDE
Press TV (
XG), then press
WIDE repeatedly to select the
wide picture mode.
wide picture mode.
) D.TUNING
Press SHIFT (
XH), then press to
enter direct tuning mode.
* CLEAR
Press SHIFT (
XH), then press to
– clear a mistake when you
press the incorrect numeric
button.
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
tuner or DVD player.
+ ENT/MEM
Press SHIFT (
XH), then press
ENT/MEM to enter the value
after selecting a channel, disc,
or track using the numeric
buttons, or to store a station
during tuner operation.
after selecting a channel, disc,
or track using the numeric
buttons, or to store a station
during tuner operation.
, MOVIE
Press to select sound field for
movies.
movies.
- MUSIC
Press to select sound field for
music.
music.
. NIGHT
MODE
Press AMP (
), then press
NIGHT MODE to activate the
NIGHT MODE function.
NIGHT MODE function.
/ HDMI
OUTPUT
Press to select output signal to
the component connected to the
HDMI OUT jacks.
the component connected to the
HDMI OUT jacks.
0 GUI MODE
Press to switch the display
mode of the menu between GUI
MODE (to display the menu on
the TV screen) and DISPLAY
MODE (to display the menu in
the display window).
mode of the menu between GUI
MODE (to display the menu on
the TV screen) and DISPLAY
MODE (to display the menu in
the display window).
1
7W#C
Press
7/W/#/C to select the
menu items. Then press
to
enter the selection.
2 OPTIONS
TOOLS
Press to display and select items
from option menus for receiver,
DVD player, TV, or Blu-ray
Disc Player, etc.
from option menus for receiver,
DVD player, TV, or Blu-ray
Disc Player, etc.
3 MENU
HOME
Press to display the menu used
to operate audio/video
components or a TV.
to operate audio/video
components or a TV.
Name
Function
4 N/.
a)
Y
a)
9
a)
/
a) b)
/
a)
Press to operate the DVD
player, Blu-ray Disc Player, CD
player, MD deck, tape deck, or
component connected to the
DIGITAL MEDIA PORT
adapter etc.
player, Blu-ray Disc Player, CD
player, MD deck, tape deck, or
component connected to the
DIGITAL MEDIA PORT
adapter etc.
CATEGORY
MODE
(U.S.A./
Canadian
model only)
MODE
(U.S.A./
Canadian
model only)
Press to select the category
mode for satellite tuner.
mode for satellite tuner.
TUNING +/–
Press to select station.
5 PRESET
+
b)
/–
Press to register FM/AM/
satellite tuner stations or to
select preset stations.
satellite tuner stations or to
select preset stations.
TV CH +
b)
/– Press TV (
XG), then press TV
CH + /– to operate the TV,
satellite tuner, VCR, etc.
satellite tuner, VCR, etc.
6 F1/F2
Press BD or DVD (
), then
press F1 or F2 to select a
component to operate.
• HDD/DISC combo
component to operate.
• HDD/DISC combo
F1: HDD
F2: DVD disc, Blu-ray Disc
F2: DVD disc, Blu-ray Disc
• DVD/VHS combo
F1: DVD disc, Blu-ray Disc
F2: VHS
F2: VHS
INPUT
MODE
MODE
Press AMP (
), then press
INPUT MODE to select the
input mode when the same
components are connected to
both digital and analog jacks.
input mode when the same
components are connected to
both digital and analog jacks.
SLEEP
Press AMP (
), then press
SLEEP to activate the sleep
timer function and the duration
which the receiver turns off
automatically.
timer function and the duration
which the receiver turns off
automatically.
7 RM SET UP
Press to set up the remote.
8 THEATER
Press to turn the Theater mode
on and off when connecting the
receiver to products featuring
“BRAVIA” Sync.
on and off when connecting the
receiver to products featuring
“BRAVIA” Sync.
9 TV
Press to enable the TV
operation.
operation.
: SHIFT
Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
changes the remote button
function to activate the buttons
with pink printing.
Name
Function
; Numeric
buttons
Press SHIFT (
XH), then press to
– preset/tune to preset stations.
– select track numbers of the
– select track numbers of the
CD player, DVD player, Blu-
ray Disc Player or MD deck.
Press -/-- (
ray Disc Player or MD deck.
Press -/-- (
XK) to select track
number 10.
– select channel numbers of
the VCR or satellite tuner.
– After pressing TV (
XG),
press the numeric buttons to
select the TV channels.
select the TV channels.
XK -/--
Press to select
– track numbers over 10 of the
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
player or MD deck.
– channel numbers of the
Digital CATV terminal.
XL A.F.D.
Press to select sound field.
XM 2CH/
A.DIRECT
Press to select sound field or to
switch the audio of the selected
input to analog signal without
any adjustment.
switch the audio of the selected
input to analog signal without
any adjustment.
F RESOLUTION Press RESOLUTION
repeatedly to change the
resolution of signals output
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack.
resolution of signals output
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack.
FB PIP
Press PIP to switch the image of
the PIP (Picture in Picture)
window. The image of the PIP
window is the one from the
EXT VIDEO IN jack. You can
swap the position of the main
screen and the PIP window by
pressing
the PIP (Picture in Picture)
window. The image of the PIP
window is the one from the
EXT VIDEO IN jack. You can
swap the position of the main
screen and the PIP window by
pressing
(
RI).
Note
When the HDMI input is
selected on the main screen, you
cannot swap the position of the
main screen and the PIP window.
When the HDMI input is
selected on the main screen, you
cannot swap the position of the
main screen and the PIP window.
FT DISPLAY
Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
$ ZONE
Press to switch the zone 2 or
zone 3 operation.
zone 3 operation.
% AMP
Press to enable the receiver
operation.
operation.
STR-DA5400ES
14
a)
See the table for information on the buttons that
you can use to control each component.
you can use to control each component.
b)
The tactile dot is attached to these buttons (TV/5,
/, PRESET +/TV CH +). Use as a mark of
operation.
/, PRESET +/TV CH +). Use as a mark of
operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
Zone 2/Zone 3 remote
commander (RM-AAP027)
commander (RM-AAP027)
This remote is for zone 2/zone 3 operations.
FE RETURN/
EXIT
0
Press to return to the previous
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
FG CATEGORY
+/–
(U.S.A./
Canadian
model only)
(U.S.A./
Canadian
model only)
Press to select the category for
satellite tuner.
satellite tuner.
#·/·C
Press to select an album.
FH DISC SKIP
Press to skip a disc when using
a multi-disc changer.
a multi-disc changer.
FI MASTER
VOL +/–
Press to adjust the volume level
of all speakers at the same time.
of all speakers at the same time.
TV VOL +/–
Press TV (
XG), then press TV
VOL +/– to adjust the volume
level of the TV.
level of the TV.
FK MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
temporarily. Press the button
again to restore the sound.
FL BD/DVD/
TOP MENU,
MENU
MENU
Press to display the menus of
the DVD player on the TV
screen. Then use
the DVD player on the TV
screen. Then use
7/W/#/C and
to perform a menu
operations.
MACRO1,
MACRO2
MACRO2
Press AMP (
), then press
MACRO 1 or MACRO 2 to set
up the macro function.
up the macro function.
Name
Function
Name
Function
" AV / (on/
standby)
Press to turn on or off the audio/
video components that the
remote is assigned to operate.
video components that the
remote is assigned to operate.
Press
/ () at the same time,
to turn off the receivers in the
main zone, zone 2 and zone 3,
and any other Sony components
(SYSTEM STANDBY).
Note
The function of the AV
main zone, zone 2 and zone 3,
and any other Sony components
(SYSTEM STANDBY).
Note
The function of the AV
/
switch changes automatically
each time you press the input
button (
each time you press the input
button (
).
# / (on/
standby)
Press to turn the receiver on or
off in zone 2 or zone 3.
Press AV
off in zone 2 or zone 3.
Press AV
/ () at the same
time to turn off the receivers in
the main zone, zone 2 and
zone 3, and any other Sony
components (SYSTEM
STANDBY).
the main zone, zone 2 and
zone 3, and any other Sony
components (SYSTEM
STANDBY).
$ ZONE
Press to enable the zone 2 or
zone 3 operation.
zone 3 operation.
% Input
buttons
Press one of the buttons to
select the component you want
to use. Press a pink-labeled
button after pressing SHIFT
(
select the component you want
to use. Press a pink-labeled
button after pressing SHIFT
(
RL). When you press any of the
input buttons, the receiver turns
on. The buttons are factory
assigned to control Sony
components. You can program
the remote to control non-Sony
components following the
steps in “Programming the
remote”
on. The buttons are factory
assigned to control Sony
components. You can program
the remote to control non-Sony
components following the
steps in “Programming the
remote”
& ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric buttons.
selecting a channel, disc or
track using the numeric buttons.
' PICTURE
Press repeatedly to cycle
through the available picture
modes of TV.
through the available picture
modes of TV.
( FAVORITES Press once to display the stored
favorite channel list of TV.
) F1/F2
Press BD or DVD (
), then
press F1 or F2 to select a
component to operate.
• HDD/DISC combo
component to operate.
• HDD/DISC combo
F1: HDD
F2: DVD disc, Blu-ray Disc
F2: DVD disc, Blu-ray Disc
• DVD/VHS combo
F1: DVD disc, Blu-ray Disc
F2: VHS
F2: VHS
Note
The F1/F2 function does not
work for video components that
have no recording function.
The F1/F2 function does not
work for video components that
have no recording function.
* GUIDE
Press to display a guide list of
the DVD player or satellite
tuner on the TV screen.
the DVD player or satellite
tuner on the TV screen.
+
7W#C
Press
7/W/#/C to select the
menu items for zone 2/zone 3.
Then press
Then press
to enter the
selection.
, OPTIONS
TOOLS
Press to display and select items
from option menus for receiver,
DVD player, TV, or Blu-ray
Disc Player, etc.
from option menus for receiver,
DVD player, TV, or Blu-ray
Disc Player, etc.
- MENU
HOME
Press to display the menu used
to operate audio/video
components or a TV.
to operate audio/video
components or a TV.
. N/.
a)
Y
a)
9
a)
/
a) b)
/
a)
Press to operate the DVD
player, Blu-ray Disc Player, CD
player, MD deck, tape deck, or
component connected to the
DIGITAL MEDIA PORT
adapter etc.
player, Blu-ray Disc Player, CD
player, MD deck, tape deck, or
component connected to the
DIGITAL MEDIA PORT
adapter etc.
/ PRESET
+
b)
/–
Press to register FM/AM/
satellite tuner stations or to
select preset stations.
satellite tuner stations or to
select preset stations.
TV CH +
b)
/– Press TV (
RK), then press TV
CH + /– to operate the TV,
satellite tuner, VCR, etc.
satellite tuner, VCR, etc.
0 RM SET UP Press to set up the remote.
1 TV /
Press to turn the TV on or off.
2 TV
Press to enable the TV
operation.
operation.
3 SHIFT
Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
changes the remote button
function to activate the buttons
with pink printing.
4 WIDE
Press repeatedly to select the
wide picture mode.
wide picture mode.
Name
Function
a)
See the table for information on the buttons that
you can use to control each component.
you can use to control each component.
b)
The tactile dot is attached to these buttons (SAT/5,
/, PRESET +/TV CH +). Use as a mark of
operation.
/, PRESET +/TV CH +). Use as a mark of
operation.
5 TV INPUT
Press TV (
RK), then press TV
INPUT to select the input signal
of a TV.
of a TV.
6 BD/DVD
TOP MENU,
MENU
MENU
Press to display the menus of
the DVD player on the TV
screen. Then use
the DVD player on the TV
screen. Then use
7/W/#/C and
to perform a menu
operations.
7 DISPLAY
Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the GUI mode, press the
button to display the menu on
the TV screen.
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the GUI mode, press the
button to display the menu on
the TV screen.
8 RETURN/
EXIT
0
Press to return to the previous
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
9 #·/·C
Press to select an album.
: DISC SKIP
Press to skip a disc when using
a multi-disc changer.
a multi-disc changer.
; MASTER
VOL +/–
Press to adjust the volume level
of all speakers in zone 2/zone 3
at the same time.
of all speakers in zone 2/zone 3
at the same time.
TV VOL +/–
Press TV (
RK), then press TV
VOL +/– to adjust the volume
level of the TV in zone 2/
zone 3.
level of the TV in zone 2/
zone 3.
XK MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
temporarily. Press the button
again to restore the sound.
STR-DA5400ES
15
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-2. CASE
(Page
(Page
16)
3-4. DSP/DIGITAL/CIS/CONTROL
BOARDS
(Page
17)
3-5. D VIDEO/DMPORT BOARDS,
BRACKET
BRACKET
(DM-HD)
(Page
17)
3-6. FRONT PANEL BLOCK
(Page
(Page
18)
3-9. HEAT SINK BLOCK
(Page
(Page
19)
3-10. POWER TRANSFORMER (T1),
E-VOL/MAIN
E-VOL/MAIN
BOARDS
(Page
20)
3-7. A-VIDEO
BOARD
(Page
18)
3-8. ANALOG
BOARD
(Page
19)
SET
3-3. TUNER
(FM/AM),
SPTM
BOARD
(Page
16)
STR-DA5400ES
16
3-3. TUNER (FM/AM), SPTM BOARD
Note: Follow the disassembly procedure in the numerical order given.
3-2. CASE
flat head screw
(TP)
(TP)
case
two flat head screws
(TP)
(TP)
two spacers (case)
two screws
(
BVST4
×
8
)
two screws
(
BVST4
×
8
)
tuner (FM/AM)
wire (flat type) (9 core)
(US,
(US,
Canadian
models)
wire (flat type) (11 core)
(except US, Canadian models)
(tuner
(FM/AM))
SPTM board
two screws (BV/ring)
three connectors
(CX4101, CX4102, CX4103)
Cut the binding band (taiton).
two screws
(
BVTT2.6
×
6
)
Click on the first or last page to see other STR-DA5400ES service manuals if exist.