Sony STR-DA3200ES / STR-DG1000 Service Manual ▷ View online
13
STR-DA3200ES/DG1000
To remove the cover
Press PUSH.
When you remove the cover, keep it out of
reach from children.
When you remove the cover, keep it out of
reach from children.
Front panel
Name
Function
A
POWER
Press to turn the
receiver on or off.
receiver on or off.
B
AUTO CAL MIC
jack
jack
Connects to the
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
Name
Function
C
TONE MODE
Adjusts FRONT BASS
and FRONT TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
and FRONT TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
TONE
E
MEMORY/
ENTER
ENTER
Press to operate a tuner
(FM/AM).
(FM/AM).
TUNING MODE
TUNING
F
DIMMER
Press to adjust
brightness of the
display.
brightness of the
display.
G
DISPLAY
Press to select
information displayed
on the display.
information displayed
on the display.
H
SUR BACK
DECODING
DECODING
Press to activate SB
DECODING
DECODING
L
MULTI CH IN
Press to select the audio
input signal from the
component connected
to the MULTI
CHANNEL INPUT
jack.
input signal from the
component connected
to the MULTI
CHANNEL INPUT
jack.
M
HDMI
Press to select input
source from the
component connected
to the HDMI IN jack.
source from the
component connected
to the HDMI IN jack.
N
PHONES jack
Connects to
headphones.
headphones.
O
SPEAKERS
(OFF/A/B/A+B)
(OFF/A/B/A+B)
Press to select A, B,
A+B, OFF of the front
speakers.
A+B, OFF of the front
speakers.
P
VIDEO 3 IN/
PORTABLE AV
IN jack
PORTABLE AV
IN jack
Connect to a portable
audio/video component
such as a camcorder or
video game.
audio/video component
such as a camcorder or
video game.
Q
MULTI
CHANNEL
DECODING
lamp
CHANNEL
DECODING
lamp
Lights up when multi-
channel audio signals
are decoded.
channel audio signals
are decoded.
R
INPUT
SELECTOR
SELECTOR
Turn to select the input
source to play back.
source to play back.
S
MASTER
VOLUME
VOLUME
Turn to adjust the
volume level of all
speakers at the same
time.
volume level of all
speakers at the same
time.
Name
Function
J
2CH
Press to select sound
field.
field.
A.F.D.
MOVIE
MUSIC
K
POWER
Press POWER (ZONE)
to enable operations in
zone 2. Then press
SELECT, then INPUT
SELECTOR
to enable operations in
zone 2. Then press
SELECT, then INPUT
SELECTOR
(qk)
to
select a source input
into zone 2.
into zone 2.
SELECT
D
Remote sensor
Receives signals from
remote commander.
remote commander.
I
Display
window
window
The current status of
the selected component
or a list of selectable
items appears here.
the selected component
or a list of selectable
items appears here.
Rear panel
A
AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a tape
deck, MD deck or
DAT player, etc.
deck, MD deck or
DAT player, etc.
MULTI
CHANNEL
INPUT jacks
CHANNEL
INPUT jacks
Connects to a Super
Audio CD player or
DVD player with an
analog audio jack for
7.1 channel or 5.1
channel sound.
Audio CD player or
DVD player with an
analog audio jack for
7.1 channel or 5.1
channel sound.
PRE OUT jacks Connects to an
external power
amplifier.
amplifier.
B
DIGITAL INPUT/OUTPUT section
OPTICAL IN/
OUT jacks
OUT jacks
Connects to a DVD
player, Super Audio
CD player, etc. The
COAXIAL jack
provides a better
quality sound.
player, Super Audio
CD player, etc. The
COAXIAL jack
provides a better
quality sound.
COAXIAL IN
jacks
jacks
HDMI IN/OUT
jacks
jacks
Connects to a DVD
player, or a satellite
tuner. An image and
the sound are output
to TV or a projector.
player, or a satellite
tuner. An image and
the sound are output
to TV or a projector.
L
R
C
ANTENNA section
FM ANTENNA
jack
jack
Connects to the FM
wire antenna (aerial)
supplied with this
receiver.
wire antenna (aerial)
supplied with this
receiver.
AM
ANTENNA
jack
ANTENNA
jack
Connects to the AM
loop antenna (aerial)
supplied with this
receiver.
loop antenna (aerial)
supplied with this
receiver.
D
COMPONENT VIDEO INPUT/
OUTPUT section
OUTPUT section
COMPONENT
VIDEO (Y, P
VIDEO (Y, P
B
/
C
B
, P
R
/C
R
)
INPUT/
OUTPUT
jacks*
OUTPUT
jacks*
Connects to a DVD
player, TV, or a
satellite tuner.
player, TV, or a
satellite tuner.
E
RS-232C jack
Used for
maintenance and
service.
maintenance and
service.
* You can watch the selected input image when you
connect the MONITOR OUT jack to a TV.
You can also display certain menu settings and the
You can also display certain menu settings and the
sound field on the monitor when you press ON
SCREEN on the remote
F
Control jack for Sony equipment
and other external components
and other external components
CTRL S IN/
OUT jacks
OUT jacks
Connects to Sony
TV, DVD player or
VCR with
CONTROL S jack.
TV, DVD player or
VCR with
CONTROL S jack.
TRIGGER
OUT jack
OUT jack
Connects to interlock
on/off of the power
supply of other 12V
TRIGGER
compliant
components.
on/off of the power
supply of other 12V
TRIGGER
compliant
components.
IR REMOTE
IN/OUT jacks
IN/OUT jacks
Connects an IR
repeater.
repeater.
G
VIDEO/AUDIO INPUT/OUTPUT
section
section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a VCR
or a DVD player etc.
or a DVD player etc.
VIDEO IN/
OUT jacks*
OUT jacks*
S VIDEO IN/
OUT jacks*
OUT jacks*
H
SPEAKERS section
Connects to speakers
L
R
(DA3200ES: AEP, UK, Taiwan models)
14
STR-DA3200ES/DG1000
You can use the supplied remote RM-AAL004
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate.
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate.
RM-AAL004
Remote commander
Name
Function
A
AV
?
/
1
(on/standby)
Press to turn on or off the audio/
video components that the
remote is assigned to operate.
video components that the
remote is assigned to operate.
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (C).
switch changes automatically
each time you press the input
button (C).
B ?
/
1
(on/standby)
Press to turn the receiver on or
off.
After pressing ZONE 2 (D),
only the receiver in zone 2 is
turned on or off with this button.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
off.
After pressing ZONE 2 (D),
only the receiver in zone 2 is
turned on or off with this button.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C
Input
buttons
buttons
Press one of the buttons to
select the component you want
to use. To utilize the buttons
with names in pink, press
SHIFT (wg), and then press the
button. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can program
select the component you want
to use. To utilize the buttons
with names in pink, press
SHIFT (wg), and then press the
button. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components. You can program
the remote to control non-Sony
components following the steps
components following the steps
in “Programming the remote”.
D
ZONE 2
Press to enable zone 2 operation.
E
SLEEP
Press to activate the Sleep
Timer function and the duration
which the receiver turns off
automatically.
Timer function and the duration
which the receiver turns off
automatically.
F
RECEIVER
Press to enable the receiver
operation.
operation.
G
2CH
Press to select a sound field.
A.F.D.
MOVIE
MUSIC
Name
Function
H
Numeric
buttons
buttons
Press to
– preset/tune to preset stations.
– select track numbers of the
– preset/tune to preset stations.
– select track numbers of the
CD player, DVD player or
MD deck. Press 0/10 to
select track number 10.
MD deck. Press 0/10 to
select track number 10.
– select channel numbers of
the VCR or satellite tuner.
– After pressing TV (wj),
press the numeric buttons to
select the TV channels.
select the TV channels.
I
ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric buttons.
selecting a channel, disc or
track using the numeric buttons.
MEMORY
Press to store a tuner station
during tuner operation.
during tuner operation.
J
DISPLAY
Press to select information
displayed on the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, or MD deck.
displayed on the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, or MD deck.
K
After pressing MENU (qd) or
TOP MENU (qk), press V/v, B
or b to select the settings. Then
press
TOP MENU (qk), press V/v, B
or b to select the settings. Then
press
to enter the selection.
L
TOOLS
Press to display and select items
from the option menus for DVD
player, etc.
from the option menus for DVD
player, etc.
OPTIONS
M
MENU
Press to display the menu of the
receiver, DVD player, or TV,
etc.
receiver, DVD player, or TV,
etc.
N
REPLAY
B
·/
ADVANCE
·
·
b
Press to replay the previous
scene or fast forward the current
scene of the VCR or DVD
player.
scene or fast forward the current
scene of the VCR or DVD
player.
O m
/
M
a)
x
a)
X
a)
H
b)
.
/
>
a)
Press to operate the DVD
player, CD player, MD deck or
tape deck, etc.
player, CD player, MD deck or
tape deck, etc.
TUNING +/–
Press to select stations.
V/v/B/b
Q
F1/F2
Press TV (wj) and then press
F1 or F2 to select a component
to operate.
• Hard disk recorder
F1 or F2 to select a component
to operate.
• Hard disk recorder
F1: HDD
F2: DVD
F2: DVD
• DVD/VHS combo player
F1: DVD
F2: VHS
F2: VHS
TV/VIDEO
Press TV/VIDEO and TV (wj)
at the same time to select the
input signal (TV input or video
input).
at the same time to select the
input signal (TV input or video
input).
WIDE
Press to select the wide picture
mode.
mode.
MACRO1,
MACRO2
MACRO2
Press RECEIVER (6) and
then press MACRO 1 or
MACRO 2 to set up the macro
function.
then press MACRO 1 or
MACRO 2 to set up the macro
function.
R
TOP MENU
Press to display the menu or
on-screen guide of the DVD
player on the TV screen. Then
use V/v/B/b and
on-screen guide of the DVD
player on the TV screen. Then
use V/v/B/b and
to perform
menu operations.
MENU
Press to display the menus of
the DVD player on the TV
screen. Then use V/v/B/b and
the DVD player on the TV
screen. Then use V/v/B/b and
to perform a menu
operations.
NIGHT
MODE
MODE
Press RECEIVER (6) and
then press NIGHT MODE to
activate the NIGHT MODE
function.
then press NIGHT MODE to
activate the NIGHT MODE
function.
INPUT
MODE
MODE
Press RECEIVER (6) and
then press INPUT MODE to
select the input mode when the
same components are
connected to both digital and
analog jacks.
then press INPUT MODE to
select the input mode when the
same components are
connected to both digital and
analog jacks.
S
MUTING
Press to activate the muting
function.
function.
T
MASTER
VOL +/–
VOL +/–
Press to adjust the volume level
of all speakers at the same time.
of all speakers at the same time.
TV VOL +/–
Press TV (wj) and then press
TV VOL +/– to adjust the
volume level of the TV.
TV VOL +/– to adjust the
volume level of the TV.
U
DISC SKIP
Press to skip a disc when using
a multi-disc changer.
a multi-disc changer.
Name
Function
P
PRESET
+
+
b)
/–
Press to register FM/AM Radio
stations or to select preset
stations.
stations or to select preset
stations.
TV CH +/–
Press TV (wj) and then press
TV CH+/– to operate the TV,
satellite tuner, VCR, etc.
TV CH+/– to operate the TV,
satellite tuner, VCR, etc.
15
STR-DA3200ES/DG1000
a)
See the table for information on the buttons that
you can use to control each component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
PRESET+). Use as a mark of operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
component, the above operation may not be
possible or may operate differently than described.
V
RETURN/
EXIT
EXIT
O
Press to return to the previous
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
W
ON SCREEN
Press to display the receiver
status. Then, if you press
MENU (qd), the menus of the
receiver appear.
status. Then, if you press
MENU (qd), the menus of the
receiver appear.
X
CLEAR
Press to
– clear a mistake when you
– clear a mistake when you
press the incorrect numeric
button.
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
tuner or DVD player.
>10
Press to select
– track numbers over 10 of the
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
player or MD deck.
– channel numbers of the
Digital CATV terminal.
D.TUNING
Press to enter direct tuning
mode.
mode.
Y
SHIFT
Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
changes the remote button
function to activate the buttons
with pink printing.
Z
A.DIRECT
Press to switch the audio of the
selected input to analog signal
without any adjustment.
selected input to analog signal
without any adjustment.
wj
TV
Press to enable TV operation.
wk
RM SET UP
Press to set up the remote.
Name
Function
RM-AAU008
This remote is only for zone 2 operations.
You cannot control the main receiver
directly with this remote.
C
MUTING
Press to mute the sound.
D
MASTER
VOL +/–
VOL +/–
Press to adjust the volume level
for multi zone output.
for multi zone output.
E
RM SET UP
Press to change the category of
the buttons.
the buttons.
F
RM SET UP
indicator
indicator
Lights up when data is being
sent or when the remote button
assignment is being preset.
sent or when the remote button
assignment is being preset.
G
ZONE 2
Press to select the command
mode of the remote.
mode of the remote.
Operating the main receiver from
zone 2
zone 2
Name
Function
A ?
/
1
(on/standby)
Press to turn a receiver in zone 2
on or off.
on or off.
B
Input
buttons
buttons
Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You can
change the button assignments
following the steps in
“Changing button assignments
(RM-AAU008 only)”.
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You can
change the button assignments
following the steps in
“Changing button assignments
(RM-AAU008 only)”.
* The setting cannot be changed.
Button
Assigned Sony
component
component
VIDEO 1
VCR (VTR mode 3)
VIDEO 2
VCR (VTR mode 1)
VIDEO 3
VCR (VTR mode 2)
DVD
DVD player
TV/SAT
TV tuner
TAPE/CD-
R
R
Tape deck B
MD/DAT
MD deck
SA-CD/CD Super Audio CD/CD
player
TUNER*
Built-in tuner
SOURCE
The current input
selected for the main
receiver
selected for the main
receiver
Name
Function
Operating the components
connected to the main receiver
from zone 2
connected to the main receiver
from zone 2
*
The function of these buttons switches
automatically each time you press the input
buttons B. The above explanation is intended to
serve as an example only. Therefore, depending
on the component, the above operation may not
be possible or may operate differently than
described.
automatically each time you press the input
buttons B. The above explanation is intended to
serve as an example only. Therefore, depending
on the component, the above operation may not
be possible or may operate differently than
described.
Name
Function
H
Operation
buttons
buttons
*
The following table describes
the function of the buttons.
the function of the buttons.
I
CH/
PRESET/
D.SKIP
+/–
PRESET/
D.SKIP
+/–
*
Press repeatedly to select a
preset station or channel. When
using a multi-disc changer,
press to skip a disc.
preset station or channel. When
using a multi-disc changer,
press to skip a disc.
Button(s) Function
N
Starts play. (Starts play
on the front side of the
cassette.)
on the front side of the
cassette.)
n
Starts play on the
reverse side of the
cassette.
reverse side of the
cassette.
X
Pauses play or
recording, and starts
recording when the
component is in
recording standby.
recording, and starts
recording when the
component is in
recording standby.
x
Stops play.
./>
Skips tracks.
16
STR-DA3200ES/DG1000
To remove the cover
Press PUSH.
When you remove the cover, keep it out of
reach from children.
When you remove the cover, keep it out of
reach from children.
Front panel
Name
Function
A
POWER
Press to turn the
receiver on or off.
receiver on or off.
B
AUTO CAL MIC
jack
jack
Connects to the
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
Name
Function
C
TONE MODE
Adjusts FRONT BASS
and FRONT TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
and FRONT TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then turn TONE to
adjust the level.
TONE
D
Remote sensor
Receives signals from
remote commander.
remote commander.
E
MEMORY/
ENTER
ENTER
Press to operate a tuner
(FM/AM/XM).
(FM/AM/XM).
TUNING MODE
TUNING
F
CATEGORY
MODE
MODE
Used when listening to
XM Radio.
XM Radio.
CATEGORY
+/–
+/–
G
Display
window
window
The current status of
the selected component
or a list of selectable
items appears here.
the selected component
or a list of selectable
items appears here.
H
2CH
Press to select sound
field.
field.
A.F.D.
MOVIE
MUSIC
J
MULTI CH IN
Press to select the audio
input signal from the
component connected
to the MULTI
CHANNEL INPUT
jack.
input signal from the
component connected
to the MULTI
CHANNEL INPUT
jack.
K
HDMI
Press to select input
source from the
component connected
to the HDMI IN jack.
source from the
component connected
to the HDMI IN jack.
L
PHONES jack
Connects to
headphones.
headphones.
M
SPEAKERS
(OFF/A/B/A+B)
(OFF/A/B/A+B)
Press to select A, B
A+B, OFF of the front
speakers.
A+B, OFF of the front
speakers.
N
VIDEO 3 IN/
PORTABLE AV
IN jack
PORTABLE AV
IN jack
Connect to a portable
audio/video component
such as a camcorder or
video game.
audio/video component
such as a camcorder or
video game.
O
MULTI
CHANNEL
DECODING
lamp
CHANNEL
DECODING
lamp
Lights up when multi-
channel audio signals
are decoded.
channel audio signals
are decoded.
P
INPUT
SELECTOR
SELECTOR
Turn to select the input
source to play back.
source to play back.
Q
MASTER
VOLUME
VOLUME
Turn to adjust the
volume level of all
speakers at the same
time.
volume level of all
speakers at the same
time.
Name
Function
I
POWER
Press POWER (ZONE)
to enable operations in
zone 2. Then press
SELECT, then INPUT
SELECTOR
to enable operations in
zone 2. Then press
SELECT, then INPUT
SELECTOR
(qh)
to
select a source input
into zone 2.
into zone 2.
SELECT
Rear panel
A
AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a tape
deck, MD deck or
DAT player, etc.
deck, MD deck or
DAT player, etc.
MULTI
CHANNEL
INPUT jacks
CHANNEL
INPUT jacks
Connects to a Super
Audio CD player or
DVD player with an
analog audio jack for
7.1 channel or 5.1
channel sound.
Audio CD player or
DVD player with an
analog audio jack for
7.1 channel or 5.1
channel sound.
PRE OUT jacks Connects to an
external power
amplifier.
amplifier.
B
DIGITAL INPUT/OUTPUT section
OPTICAL IN/
OUT jacks
OUT jacks
Connects to a DVD
player, Super Audio
CD player, etc. The
COAXIAL jack
provides a better
quality sound.
player, Super Audio
CD player, etc. The
COAXIAL jack
provides a better
quality sound.
COAXIAL IN
jacks
jacks
L
R
C
ANTENNA section
FM ANTENNA
jack
jack
Connects to the FM
wire antenna (aerial)
supplied with this
receiver.
wire antenna (aerial)
supplied with this
receiver.
AM
ANTENNA
jack
ANTENNA
jack
Connects to the AM
loop antenna (aerial)
supplied with this
receiver.
loop antenna (aerial)
supplied with this
receiver.
XM
ANTENNA
jack
ANTENNA
jack
Connects to the XM
connect-and-Play
antenna (aerial) (not
supplied).
connect-and-Play
antenna (aerial) (not
supplied).
* You can watch the selected input image when you
connect the MONITOR OUT jack to a TV.
You can also display certain menu settings and
the sound field on the monitor when you press ON
SCREEN on the remote.
SCREEN on the remote.
E
VIDEO/AUDIO INPUT/OUTPUT
section
section
AUDIO IN/
OUT jacks
OUT jacks
Connects to a VCR
or a DVD player etc.
or a DVD player etc.
VIDEO IN/
OUT jacks*
OUT jacks*
S VIDEO IN/
OUT jacks*
OUT jacks*
F
SPEAKERS section
Connects to speakers.
L
R
D
COMPONENT VIDEO INPUT/
OUTPUT section
OUTPUT section
COMPONENT
VIDEO (Y, P
VIDEO (Y, P
B
/
C
B
, P
R
/C
R
)
INPUT/
OUTPUT
jacks*
OUTPUT
jacks*
Connects to a DVD
player, TV, or a
satellite tuner.
player, TV, or a
satellite tuner.
HDMI IN/OUT
jacks
jacks
Connects to a DVD
player, or a satellite
tuner. An image and
the sound are output
to TV or a projector .
player, or a satellite
tuner. An image and
the sound are output
to TV or a projector .
(DG1000)
Click on the first or last page to see other STR-DA3200ES / STR-DG1000 service manuals if exist.