Sony STR-DA1800ES Service Manual ▷ View online
STR-DA1800ES
5
2. Checking method of wired LAN operation
Check that access point is recognized surely.
Check that access point is recognized surely.
Necessary machinery and materials:
• PC (Windows XP/Vista)
• Router
• PC (Windows XP/Vista)
• Router
(Transmission rate is 100 Mbps or more, built-in DHCP server
function)
function)
• Two LAN cables
(Category 5 cable, normal type or shield type)
• Monitor
• Supplied multifunction remote commander (RM-AAP080)
• Supplied multifunction remote commander (RM-AAP080)
Connection:
(The router need not be connected with the internet)
(The router need not be connected with the internet)
LAN cable
router
PC
STR-
DA1800ES
monitor
D-VIDEO NW board
jack (CN7002)
D-VIDEO NW board
HDMI OUT A ARC connector
(CN3706)
HDMI OUT A ARC connector
(CN3706)
HDMI cable
Procedure:
1. The setting of LAN of PC is setting to the automatic IP address
1. The setting of LAN of PC is setting to the automatic IP address
assignment.
It changes to the setting that displays the image on the monitor.
2. Perform connection with reference to connection fi gure.
3. The power supply of the router is turn on, next, the power sup-
3. The power supply of the router is turn on, next, the power sup-
ply of PC and this unit is turn on.
4. Press the [MENU] button of the remote commander, the menu
is displayed on the monitor.
5. Press the [
V
]/[
v
] buttons of the remote commander to select
the “
Settings” on the menu, and press the [ ] button or [
b
]
button of remote commander.
6. Press
the
[
V
]/[
v
] buttons of the remote commander to select the
“Network”, and press the [ ] button or [
b
] button of remote
commander.
7. Press
the
[
V
]/[
v
] buttons of the remote commander to select the
“Settings”, and press the [ ] button of remote commander.
8. Press
the
[
V
]/[
v
] buttons of the remote commander to select the
“Wireless LAN Settings”, and press the [ ] button of remote
commander.
commander.
(If the “Change Settings?” appears on the monitor, select the
“OK”, and press the [ ] button of remote commander)
“OK”, and press the [ ] button of remote commander)
9. Press
the
[
V
]/[
v
] buttons of the remote commander to select the
“Auto”, and press the [ ] button of remote commander.
The proxy setting display appears on the monitor.
10. Press the [
V
]/[
v
] buttons of the remote commander to select the
“Do Not Use”, and press the [ ] button of remote commander.
The
confi rmation display appears on the monitor.
11. Press the [
V
]/[
v
] buttons of the remote commander to select the
“OK”, and press the [ ] button of remote commander.
“Connecting” appears on the monitor.
12. Check that the“Complete!” appears after the network settings
are completed. Press the [ ] button of remote commander.
13. Press the [\/1] button to turn off the main power.
Note: Refer to the instruction manual about details of the setting method.
CHECKING METHOD OF NETWORK OPERATION
It is necessary to check the network operation, when replacing the
network module (NW1) or the complete D-VIDEO NW board.
Check the operation of wireless and wired LAN, according to the
following method.
It is necessary to check the network operation, when replacing the
network module (NW1) or the complete D-VIDEO NW board.
Check the operation of wireless and wired LAN, according to the
following method.
Note: When this confi rmation is executed, IP address is changed.
1. Checking Method of Wireless LAN Operation
Check that access point is recognized surely.
Check that access point is recognized surely.
Necessary machinery and materials:
• PC (Windows XP/Vista)
• Wireless LAN router/access point
• Monitor
• Supplied multifunction remote commander (RM-AAP080)
• PC (Windows XP/Vista)
• Wireless LAN router/access point
• Monitor
• Supplied multifunction remote commander (RM-AAP080)
Connection:
Wireless
LAN router/
access point
PC
STR-
DA1800ES
monitor
D-VIDEO NW board
HDMI OUT A ARC connector
(CN3706)
HDMI OUT A ARC connector
(CN3706)
HDMI cable
Procedure:
1. The setting of LAN of PC is setting to the automatic IP address
1. The setting of LAN of PC is setting to the automatic IP address
assignment.
It changes to the setting that displays the image on the monitor.
2. Perform connection with reference to connection fi gure.
3. The power supply of the wireless LAN router/access point is
3. The power supply of the wireless LAN router/access point is
turn on, next, the power supply of PC and this unit is turn on.
4. Press the [MENU] button of the remote commander, the menu
is displayed on the monitor.
5. Press the [
V
]/[
v
] buttons of the remote commander to select
the “
Settings” on the menu, and press the [ ] button or [
b
]
button of remote commander.
6. Press
the
[
V
]/[
v
] buttons of the remote commander to select the
“Network”, and press the [ ] button or [
b
] button of remote
commander.
7. Press
the
[
V
]/[
v
] buttons of the remote commander to select the
“Settings”, and press the [ ] button of remote commander.
8. Press
the
[
V
]/[
v
] buttons of the remote commander to select the
“Wireless LAN Settings”, and press the [ ] button of remote
commander.
commander.
(If the “Change Settings?” appears on the monitor, select the
“OK”, and press the [ ] button of remote commander)
“OK”, and press the [ ] button of remote commander)
9. Press the [
V
]/[
v
] buttons of the remote commander to select
the “Access Point Scan”, and press the [ ] button of remote
commander.
commander.
10. This unit starts searching for access points, and displays a list
of up to 30 available network name (SSID).
11. Check that access point (SSID) is displayed on the searching
result.
12. Press the [\/1] button to turn off the main power.
Note: Refer to the instruction manual about details of the setting method.
STR-DA1800ES
6
MAIN BOARD SERVICE POSITION
– Rear side view –
MAIN board
alligator clip
Note: Connect altogether the metal part
Note: Connect altogether the metal part
on the boards connected with the
chassis using the alligator clip.
DIGITAL BOARD SERVICE POSITION
alligator clip
Note: Connect altogether the metal part
Note: Connect altogether the metal part
on the boards connected with the
chassis using the alligator clip.
Connect extension cable to the
DIGITAL board (CN2105)
and MAIN board (CNP410).
DIGITAL board (CN2105)
and MAIN board (CNP410).
Connect extension cable to the
DIGITAL board (CN2608)
and DSP board (CN2006).
DIGITAL board (CN2608)
and DSP board (CN2006).
DSP board
(CN2006)
(CN2006)
Connect extension cable to the
DIGITAL board (CN2114)
and MAIN board (CNP411).
DIGITAL board (CN2114)
and MAIN board (CNP411).
DIGITAL board
(CN2114)
(CN2114)
DIGITAL board
(CN2105)
(CN2105)
DIGITAL board
(CN2608)
(CN2608)
MAIN board
(CNP411)
(CNP411)
MAIN board
(CNP410)
(CNP410)
Connect extension cable to the
DIGITAL board (CN2103)
and AVIDEO board (CN271).
DIGITAL board (CN2103)
and AVIDEO board (CN271).
D-VIDEO NW board
(CN3005)
(CN3005)
AVIDEO board
(CN271)
(CN271)
Connect extension cable to the
DIGITAL board (CN2513)
and D-VIDEO NW board (CN3005).
DIGITAL board (CN2513)
and D-VIDEO NW board (CN3005).
DIGITAL board (CN2103)
DIGITAL board (CN2513)
• JIG
Part
Part
No.
Description
A-1891-150-A
SERVICE JIG COMBINED PCB ASSY
STR-DA1800ES
7
D-VIDEO NW BOARD SERVICE POSITION
insulating sheet
alligator clip
D-VIDEO NW board
(CN3005)
(CN3005)
Connect extension cable to the
DIGITAL board (CN2513)
and D-VIDEO NW board (CN3005).
DIGITAL board (CN2513)
and D-VIDEO NW board (CN3005).
DIGITAL board (CN2513)
to D-VIDEO NW board (CN7003)
to D-VIDEO NW board (CN3011)
to D-VIDEO NW board (CN3008)
to D-VIDEO NW board
(CN3007)
(CN3007)
to D-VIDEO NW board (CN3012)
to D-VIDEO NW board (CN3200)
to D-VIDEO NW board (CN3010)
to D-VIDEO NW board (CN3009)
Note 2: Connect altogether the metal part
on the boards connected with the
chassis using the alligator clip.
Note 1: Connect all the connectors.
AVIDEO BOARD, HAT BOARD SERVICE POSITION
Connect extension cable to the
DIGITAL board (CN2103)
and AVIDEO board (CN271).
DIGITAL board (CN2103)
and AVIDEO board (CN271).
AVIDEO board
(CN271)
(CN271)
DIGITAL board (CN2103)
insulating sheet
alligator clip
D-VIDEO NW board
(CN3005)
(CN3005)
HAT board
Connect extension cable to the
DIGITAL board (CN2513)
and D-VIDEO NW board (CN3005).
DIGITAL board (CN2513)
and D-VIDEO NW board (CN3005).
DIGITAL board (CN2513)
to D-VIDEO NW board (CN7003)
to D-VIDEO NW board (CN3011)
to D-VIDEO NW board (CN3008)
to D-VIDEO NW board
(CN3007)
(CN3007)
to D-VIDEO NW board (CN3012)
to D-VIDEO NW board (CN3010)
to D-VIDEO NW board (CN3009)
Note 1: Connect all the connectors.
Note 2: Connect altogether the metal part
on the boards connected with the
chassis using the alligator clip.
alligator clip
Note 2: Connect altogether the metal
Note 2: Connect altogether the metal
part on the boards connected
with the chassis using the
alligator
clip.
to D-VIDEO NW board (CN3200)
to DCDC board (CN1500)
to STANDBY board
(CN908)
(CN908)
• JIG
Part
Part
No.
Description
A-1891-150-A
SERVICE JIG COMBINED PCB ASSY
• JIG
Part
Part
No.
Description
A-1891-150-A
SERVICE JIG COMBINED PCB ASSY
STR-DA1800ES
8
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
2-2. CASE, FUSE (F901)
(Page
(Page
9)
2-3. FRONT PANEL BLOCK
(Page
(Page
10)
2-9. TUNER1AMF
ASSY
(TU1)
(Page
15)
2-17. HOW TO BEND WIRE (FLAT TYPE)
(Page
(Page
20)
SET
2-5. D-VIDEO NW BOARD
(Page
(Page
12)
2-4. D-VIDEO NW BOARD BLOCK
(Page
(Page
11)
2-6. STANDBY
BOARD
(Page
13)
2-7. DCDC
BOARD,
DCDC2
BOARD
(Page
14)
2-8. HAT
BOARD
(Page
15)
2-14. DIGITAL BOARD
(Page
(Page
18)
2-10. BACK PANEL BLOCK
(Page
(Page
16)
2-11. CENTER BRACKET BLOCK
(Page
(Page
16)
2-12. AVIDEO BOARD
(Page
(Page
17)
2-13. DIGITAL BOARD BLOCK
(Page
(Page
18)
2-15. MAIN BOARD BLOCK
(Page
(Page
19)
2-16. MAIN BOARD
(Page
(Page
20)
Click on the first or last page to see other STR-DA1800ES service manuals if exist.