Sony SRS-BTV5 Service Manual ▷ View online
SRS-BTV5
9
2-9. LITHIUM ION BATTERY
:LUHVHWWLQJ
[red]
[red]
[blue]
[white]
[black]
to lithium ion
battery
battery
SUB board
4
Remove the lithium ion battery
in the direction of an arrow.
5
lithium ion battery
1
Remove two solders.
2 screw
(P2
(P2
u 6)
hole
hole
Note 2: When wires has separated,
install correctly with reference
to the following figure.
3
SUB board block
Note 1:
Note 1:
When installing the SUB board block,
align two holes with two bosses.
SRS-BTV5
10
2-10. MAIN BOARD BLOCK
:LUHVHWWLQJ
2
Remove the MAIN board block
in the direction of an arrow.
3
MAIN board block
plate static
MAIN board
microphone unit
[black]
[black]
[blue]
[gray]
[white]
[white]
[red]
Note 1: When wires has separated, install correctly
with reference to the following figure.
1 screw
(P2
(P2
u 6)
1 screw
(P2
(P2
u 6)
±%RWWRPYLHZ±
Note 2: When installing the MAIN board block,
align the switch with the power knob.
power knob
switch
power knob
SRS-BTV5
11
SECTION 3
TEST MODE
Buttons and indicator position:
– Bottom side view –
[BATT/CHG] LED
[VOL +] button
[VOL –] button
[ ] LED
Power switch
INITIALIZE MODE
It returns to setting of factory shipment. Pairing information, mu-
sic volume and telephone call volume are initialized.
It returns to setting of factory shipment. Pairing information, mu-
sic volume and telephone call volume are initialized.
Procedure:
1. Slide the power switch to the [ PAIRING POWER] side to
1. Slide the power switch to the [ PAIRING POWER] side to
turn the power off.
2. Slide and hold the power switch to the [ PAIRING POWER]
side for about 10 seconds (turn the power on).
3. Initialization is completed, then turn the power off.
SOFTWARE VERSION DISPLAY MODE
It returns to setting of factory shipment. Pairing information, mu-
sic volume and telephone call volume are initialized.
It returns to setting of factory shipment. Pairing information, mu-
sic volume and telephone call volume are initialized.
Procedure:
1. Slide the power switch to the [ PAIRING POWER] side to
1. Slide the power switch to the [ PAIRING POWER] side to
turn the power off.
2. Slide and hold the power switch to the [ PAIRING POWER]
side for about 2 seconds (turn the power on).
3. The
[ ] LED fl ashes fast in pairing mode.
4. Press the buttons of [VOL −] and [VOL +] simultaneously.
5. Press within 3 seconds in order of [VOL −] and [VOL +] but-
5. Press within 3 seconds in order of [VOL −] and [VOL +] but-
tons after step 4.
The software version is expressed by the blink display of
[BATT/CHG] and [ ] LED.
[BATT/CHG] and [ ] LED.
6. To release from this mode, slide the power switch to the [
PAIRING POWER] side to turn the power off.
The software version check method
The software version display by LED is repeated during a software
version display mode.
[BATT/CHG] or [ ] LED (or both) blinks in order.
A software version is expressed by the number of times of blinks
of each LED.
The software version display by LED is repeated during a software
version display mode.
[BATT/CHG] or [ ] LED (or both) blinks in order.
A software version is expressed by the number of times of blinks
of each LED.
Software version
X.XX
Minor version (Lower): [ ] LED only
Minor version (Upper): [BATT/CHG] LED only
Major version: [BATT/CHG] and [ ] LED
Minor version (Upper): [BATT/CHG] LED only
Major version: [BATT/CHG] and [ ] LED
Example:
LED turn off
during 2 seconds
during 2 seconds
When the software version is “1.23”.
[BATT/CHG] LED : on
[ ] LED
[ ] LED
: on
Blink 1 time
(1 second cycle)
(1 second cycle)
[BATT/CHG] LED : on
[ ] LED
[ ] LED
: off
Blink 2 times
(1 second cycle)
(1 second cycle)
LED turn off
during 2 seconds
during 2 seconds
[BATT/CHG] LED : off
[ ] LED
[ ] LED
: on
Blink 3 times
(1 second cycle)
(1 second cycle)
LED turn off
during 2 seconds
during 2 seconds
When the software version is “2.01”.
In the part of version “0”, does not blink LED.
In the part of version “0”, does not blink LED.
LED turn off
during 2 seconds
during 2 seconds
[BATT/CHG] LED : on
[ ] LED
[ ] LED
: on
Blink 2 times
(1 second cycle)
(1 second cycle)
[BATT/CHG] LED : off
[ ] LED
[ ] LED
: on
Blink 1 time
(1 second cycle)
(1 second cycle)
LED turn off
during 2 seconds
during 2 seconds
12
SRS-BTV5
SECTION 4
EXPLODED VIEWS
1
A-1902-382-A OVERALL ASSY, MAIN (BLACK: E)
1
A-1902-383-A OVERALL ASSY, MAIN (WHITE: E)
1
A-1902-384-A OVERALL ASSY, MAIN (BLUE: E)
1
A-1902-385-A OVERALL ASSY, MAIN (VIVID PINK: E)
1
A-1902-386-A OVERALL ASSY, MAIN (BLACK: US, CND)
1
A-1902-387-A OVERALL ASSY, MAIN (WHITE: US, CND)
1
A-1902-388-A OVERALL ASSY, MAIN (BLUE: US, CND)
1
A-1902-389-A OVERALL ASSY, MAIN (VIVID PINK: US, CND)
1
A-1918-447-A OVERALL ASSY, MAIN (BLACK: CH)
1
A-1918-448-A OVERALL ASSY, MAIN (WHITE: CH)
1
A-1918-449-A OVERALL ASSY, MAIN (BLACK: RU)
1
A-1944-871-A OVERALL ASSY, MAIN (BLUE: CH)
1
A-1944-937-A OVERALL ASSY, MAIN (VIVID PINK: CH)
1
A-1944-942-A OVERALL ASSY, MAIN (LIGHT PINK: CH)
1
A-1951-445-A OVERALL ASSY, MAIN (WHITE: RU)
1
A-2044-213-A OVERALL ASSY, MAIN (YELLOW: US, CND)
1
A-2044-216-A OVERALL ASSY, MAIN (YELLOW: E)
1
A-2044-219-A OVERALL ASSY, MAIN (YELLOW: CH)
1
A-2054-422-A OVERALL ASSY, MAIN (BLUE: RU)
2
4-434-716-01 TOP, PANEL (BLACK)
2
4-434-716-11 TOP, PANEL (WHITE)
2
4-434-716-21 TOP, PANEL (BLUE)
2
4-434-716-31 TOP, PANEL (VIVID PINK)
2
4-434-716-41 TOP, PANEL (LIGHT PINK)
2
4-434-716-51 TOP, PANEL (YELLOW)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
4-1. OVERALL SECTION
• Refer to “COLOR VARIATION” in the “SER-
VICING NOTES” (page 2) about color vari-
ation of destination.
ation of destination.
• Abbreviation
CH
CH
: Chinese model
CND : Canadian model
RU
RU
: Russian model
• When disassembling this unit, be sure to
disassemble, after wearing a wrist strap
coping with static electricity.
coping with static electricity.
2
1
NFC tag section
not supplied
Ver. 1.4
Click on the first or last page to see other SRS-BTV5 service manuals if exist.