Sony SRS-BTV5 Service Manual ▷ View online
SRS-BTV5
5
2-4. PILLAR
2-5. ESCUTCHEON
$GKHVLYHVKHHWWRSSDQHODQGZLUHVHWWLQJ
boss
boss
boss
boss
2 screw (P2 u 8)
3 pillar
2 screw (P2 u 8)
1 adhesive sheet (top panel)
Note: When peeling off the adhesive sheet (top panel), do not damage the pillar.
Note: When peeling off the adhesive sheet (top panel), do not damage the pillar.
Furthermore, do not give a crack to the cabinet side.
adhesive sheet (top panel)
±7RSYLHZ±
2 Remove the escutcheon block
in the direction of an arrow.
4 escutcheon
escutcheon
3 cushion (duct)
guide line
Make extra part
to double.
to double.
Fold.
3 cushion (duct)
cushion (duct)
cushion (duct)
10 ± 2 mm
Note 2: To look at the upper side of the hole,
more than half of the space is required.
1 Peel off the adhesive sheet
(escutcheon).
Note 1:
Note 1:
When peeling off the adhesive
sheet (escutcheon), do not
damage the escutcheon.
Furthermore, do not give a crack
to the cabinet side.
OK
Note 3: To look at the upper side of the hole,
do not fill more than half of the space
in the wrinkled and peeling.
NG
&XVKLRQGXFWVHWWLQJ
SRS-BTV5
6
2-6. LOUDSPEAKER (3.4 cm) (SP1), UPPER CABINET
1 screw
(P2
(P2
u 6)
1 two screws
(P2
(P2
u 6)
3 two screws
(P2
(P2
u 6)
1 screw
(P2
(P2
u 6)
2 Remove the upper cabinet block
in the direction of an arrow.
7 Draw out two wires.
8 upper cabinet
5 Remove two solders.
4 Remove the loudspeaker (3.4 cm)
in the direction of an arrow.
6 loudspeaker (3.4 cm) (SP1)
Note 1: When installing the loudspeaker
(3.4 cm) (SP1), turn terminals to
the
“SONY” logo side.
“SONY” logo
[red]
[white]
loudspeaker
(3.4 cm) (SP1)
(3.4 cm) (SP1)
front side
Note 2: Insert twos wire in
an correct hole.
NG
OK
:LUHVHWWLQJ
±%RWWRPVLGHYLHZ8SSHUFDELQHWEORFN±
SRS-BTV5
7
2-7. PARTITION
ASSY
$FRXVWLFDEVRUEHQWVHWWLQJ
±7RSYLHZ±
1 acoustic absorbent
3 partition assy
partition assy
long side
short side
acoustic absorbent
cushion (speaker code)
speaker wire
[red]
[red]
speaker wire
[white]
[white]
2 screw
(P2
(P2
u 6)
2 screw
(P2
(P2
u 6)
2 screw
(P2
(P2
u 6)
2 screw
(P2
(P2
u 6)
front side
:LUHVHWWLQJ
±7RSYLHZ±
front side
SRS-BTV5
8
2-8. BATTERY HOLDER BLOCK
1
plate static
2
microphone unit
3 screw
(P2
(P2
u 6)
3 two screws
(P2
(P2
u 6)
4 Remove the battery
holder block in the
direction of an arrow.
6 battery holder block
5 connector
(CN004)
(CN004)
NG
OK
:LUHVHWWLQJ
Note 3: Wires must not cover the battery.
Note 2: Wires must not cover
the SUB board.
Note 4: Arrange the speaker wire
next to the screw hole.
battery
screw hole
SUB Board
SUB Board
screw hole
speaker wire
NG
OK
NG
Note 1: Wires must not cover
the
the
screw.
NG
OK
battery
battery
plate static
microphone unit
0LFURSKRQHXQLWDQGSODWHVWDWLFVHWWLQJ
outside
inner side
microphone unit
wire
–
,QQHUVLGHYLHZ
–
–
OXWVLGHYLHZ
–
–7RSYLHZ–
Click on the first or last page to see other SRS-BTV5 service manuals if exist.