Sony SRS-BTV5 Service Manual ▷ View online
SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
SRS-BTV5
SPECIFICATIONS
WIRELESS SPEAKER SYSTEM
9-893-645-05
2014D33-1
©
2014.04
US Model
Canadian Model
E Model
Chinese Model
Russian Model
Ver. 1.4 2014.04
On Copyrights
The
Bluetooth
®
word mark and logos are owned by the Bluetooth SIG,
Inc. and any use of such marks by Sony Corporation is under license.
The N Mark is a trademark or registered trademark of NFC Forum, Inc.
in the United States and in other countries.
Microsoft, Windows and Windows Vista are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
Other trademarks and trade names are those of their respective owners.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Speaker section
Speaker system: 34 mm (1 3/8 in.) dia. / Impedance: 6 Ω
Amplifier section (Except Chinese model)
Reference output power: 1.2 W (10% T.H.D., 1 kHz, 6 Ω) /
Amplifier section (Chinese model)
Input: Stereo mini jack × 1
Input: Stereo mini jack × 1
Bluetooth
Communication System:
Bluetooth Specification version 3.0 /
Output:
Bluetooth Specification Power Class 2 / Maximum communication
range: Line of sight approx. 10 m (30 ft)*
1
/ Frequency band: 2.4 GHz band
(2.4000 GHz - 2.4835 GHz) / Modulation method: FHSS /
Compatible
Compatible
Bluetooth Profiles*
2
: A2DP (Advanced Audio Distribution
Profile), AVRCP (Audio Video Remote Control Profile), HFP (Hands-free
Profile), HSP (Headset Profile) / Supported Codec*
Profile), HSP (Headset Profile) / Supported Codec*
3
: SBC*
4
/
Supported content protection method: SCMS-T
*
1
The actual range will vary depending on factors such as obstacles
between devices, magnetic fields around a microwave oven, static
electricity, reception sensitivity, antenna’s performance, operating
system, software application, etc.
electricity, reception sensitivity, antenna’s performance, operating
system, software application, etc.
*
2
Bluetooth standard profiles indicate the purpose of Bluetooth
communication between devices.
communication between devices.
*
3
Codec: Audio signal compression and conversion format
*
4
Subband Codec
General (Except Chinese model)
Power: DC 5 V / Rated power consumption: 1.7 W / Battery life (when
using
using
Bluetooth connection): Approx. 5 hours*
5
/ Charging time: Approx.
3 hours*
5
/ Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) /
Dimensions: Approx. 65 mm × 67.6 mm × 65 mm (2 5/8 in. × 2 3/4 in. ×
2 5/8 in.) (w/h/d) / Mass: Approx. 135 g (5 oz.) including the rechargeable
2 5/8 in.) (w/h/d) / Mass: Approx. 135 g (5 oz.) including the rechargeable
Power: DC 5 V / Rated power consumption: 1.7 W / Operating
temperature: 5 °C to 35 °C / Dimensions: Approx. 65 mm × 67.6 mm ×
65 mm (w/h/d) / Mass: Approx. 135 g including the rechargeable battery /
temperature: 5 °C to 35 °C / Dimensions: Approx. 65 mm × 67.6 mm ×
65 mm (w/h/d) / Mass: Approx. 135 g including the rechargeable battery /
Supplied accessories: Micro-USB cable (1), Carrying pouch (1), Quick Start
Guide (1), Reference Guide (1)
Guide (1), Reference Guide (1)
Design and specifications are subject to change without notice.
battery / Supplied accessories: Micro-USB cable (1), Carrying pouch (1),
Quick Start Guide (1), Reference Guide (1)
Quick Start Guide (1), Reference Guide (1)
*
5
Time may vary, depending on the temperature or conditions of use.
General (Chinese model)
SRS-BTV5
2
SECTION 1
SERVICING NOTES
ABOUT THE REPAIRING OF BOARD
Repair of each boards cannot be performed. When boards installed
by this unit are defective, replace the MAIN OVERALL ASSY.
Repair of each boards cannot be performed. When boards installed
by this unit are defective, replace the MAIN OVERALL ASSY.
CHECKING OF OPERATIONS AFTER REPAIR
After the completion of repair, execute initialization. The volume
settings etc. are returned to setting of factory shipment, and all the
pairing information is deleted.
After the completion of repair, execute initialization. The volume
settings etc. are returned to setting of factory shipment, and all the
pairing information is deleted.
The method of initialization:
1. Slide the power switch to the “PAIRING POWER” side to turn
1. Slide the power switch to the “PAIRING POWER” side to turn
the power off.
2. Slide and hold the power switch to the [ PAIRING POWER]
side for about 10 seconds (turn the power on).
3. Initialization is completed, then turn the power off.
– Bottom side view –
Power switch
• Color variations
Color
(B) Black
(W) White
(L) Blue
(P) Vivid pink
(PI) Light pink
(Y) Yellow
Destination
All models
All models
All models
US model
Canadian model
E model
Chinese model
Canadian model
E model
Chinese model
Chinese model
US model
Canadian model
E model
Chinese model
Canadian model
E model
Chinese model
Ver. 1.4
SRS-BTV5
3
SECTION 2
DISASSEMBLY
Note: When disassembling this unit, be sure to disassemble, after wearing a wrist strap coping with static electricity.
•
This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
SET
2-3. NFC
TAG
(Page
4)
2-4. PILLAR
(Page
(Page
5)
2-5. ESCUTCHEON
(Page
(Page
5)
2-6. LOUDSPEAKER (3.4 cm) (SP1),
UPPER
UPPER
CABINET
(Page
6)
2-7. PARTITION
ASSY
(Page
7)
2-2. PANEL
TOP
(Page
4)
2-8. BATTERY HOLDER BLOCK
(Page
(Page
8)
2-9. LITHIUM ION BATTERY
(Page
(Page
9)
2-10. MAIN BOARD BLOCK
(Page
(Page
10)
SRS-BTV5
4
Note: Follow the disassembly procedure in the numerical order given.
2-2. PANEL TOP
1 boss
solder side
1 boss
3 panel top
Note 2: When installing the panel top,
turn the rib to the solder side.
2 Peel off the adhesive sheet (top panel).
Note 1: When peeling off the adhesive sheet (top panel),
do not damage the top panel.
Furthermore, do not give a crack to the cabinet
side.
2-3. NFC TAG
2 Peel off the adhesive sheet (top panel).
Note
Note
2:
When peeling off the adhesive
sheet (top panel), do not damage
the NFC tag.
Furthermore, do not give a crack
to the cabinet side.
3 NFC tag
Note 3:
When installing the NFC tag,
check direction of “SONY” logo and
install
correctly.
“SONY” logo
1 Remove two solders.
Note
Note
1:
When removing solders, do not
damage the NFC tag.
:LUHVHWWLQJ
NFC tag
boss
boss
boss
boss
[blue]
[gray]
front side
ditch
Note 4: Wire must not plug
up the screw hole.
NG
OK
±7RSYLHZ±