Sony SA-NS410 Service Manual ▷ View online
SA-NS410
13
2-14. TOP PANEL BLOCK
• JIG
When disassembling the set, use the following jig (for speaker
When disassembling the set, use the following jig (for speaker
removal).
Part
No.
Description
J-2501-238-A
JIG FOR SPEAKER REMOVAL
L
L
3 top panel block
Note
2: When installing the top panel block,
remove the used bond and use a new
bond to fix the top panel block.
(No specific bond is designated for
this
purpose)
1 Insert the jig into a space and raise
top panel block.
Note 1: When using a jig, please work so
as not to injure top panel block.
1 Insert the jig into a space and raise
top panel block.
Note
1: When using a jig, please work so
as not to injure top panel block.
1 Insert the jig into a space and raise
top panel block.
Note
1: When using a jig, please work so
as not to injure top panel block.
2
All bosses are removed while
moving jig, and top panel block
is
removed.
total five bosses
– Left side view –
SA-NS410
14
2-15. TWEETER BLOCK
R
1 screw
(3.5
u 12)
1 three screws
(3.5
u 12)
1 three screws
(3.5
u 12)
1 four screws
(3.5
u 12)
1 screw
(3.5
u 12)
2 tweeter block
boss
boss
boss
boss
boss
boss
boss
boss
SP1
SP3
SP4
SP2
6SHDNHUZLUHVHWWLQJ
Note 1: When installing the tweeter block, match each two holes of
SP1, SP2, SP3 and SP4 to bosses.
Note 2: Speaker wire must not cover a hole.
speaker wire
speaker wire
SP1
SP3
SP4
SP2
–WRSVLGHYLHZ–
)URQW
5HDU
–WRSVLGHYLHZ–
–IURQWVLGHYLHZ–
)URQW
5HDU
SA-NS410
15
2-16. LOUDSPEAKER (3 cm) (SP1, SP2, SP3, SP4)
R
4 black
8 black
5 red
9 red
5 red
6 gray
0 gray
7 blue
qa blue
6 gray
0 gray
7 blue
qa blue
4 black
SP2
SP1
SP4
SP3
narrow terminal
narrow terminal
wide terminal
wide terminal
wide terminal
wide terminal
narrow terminal
narrow
terminal
terminal
6SHDNHUZLUHVHWWLQJ
1 Pile up black terminal
with red terminal.
2 Pile up gray terminal
with blue terminal.
3 Put red and black terminals
on blue and gray terminals.
8 black
“L” mark
“R” mark
“L” mark
“R” mark
9 red
3 loudspeaker (3 cm)
(SP3)
6 loudspeaker (3 cm)
(SP4)
9 loudspeaker (3 cm)
(SP1)
qs loudspeaker (3 cm)
(SP2)
qa
terminal
(black)
5
terminal
(black)
4
terminal
(red)
7
terminal
(blue)
2
terminal
(gray)
1
terminal
(blue)
8
terminal
(gray)
0
terminal
(red)
SA-NS410
16
SECTION 3
TEST MODE
VERSION DISPLAY MODE
It can display the system version.
It can display the system version.
Procedure:
1. Press the [
1. Press the [
?/1
] key to turn the power on.
2. Press two keys of the [AUDIO IN] and [VOL−] simultane-
ously for three seconds.
3. [PARTY] LED (green color), [UPDATE] LED (green color)
and [AUDIO IN] LED blink, and enter the version display
mode.
mode.
4. Press the [AUDIO IN] key to enter the wireless LAN module
version display mode.
X . X X: wireless LAN module version
It is shown by the blinking frequency of the [AUDIO
IN] LED.
IN] LED.
It is shown by the blinking frequency of the [UPDATE]
LED (green color).
LED (green color).
It is shown by the blinking frequency of the [PARTY]
LED (green color).
LED (green color).
5. Press
the
[VOL
−] key to enter the microprocessor version dis-
play mode.
X . X X: microprocessor version
It is shown by the blinking frequency of the [AUDIO
IN] LED.
IN] LED.
It is shown by the blinking frequency of the [UPDATE]
LED (green color).
LED (green color).
It is shown by the blinking frequency of the [PARTY]
LED (green color).
LED (green color).
Releasing method:
Press the [
Press the [
?/1
] key to turn the power off, or press two keys of the
[AUDIO IN] and [VOL−] simultaneously for three seconds.
FACTORY SHIPMENT SETTING
It can be returned to the state at the time of factory shipment.
It can be returned to the state at the time of factory shipment.
Procedure:
1. Press the [
1. Press the [
?/1
] key to turn the power on.
2. Press the [ALL RESET] key for three seconds.
3. All setting is returned to the factory shipment state, then it re-
3. All setting is returned to the factory shipment state, then it re-
boots, and become the power on state.
SOUND QUALITY Gp AND Wi-Fi FREQUENCY CHAN-
NEL DISPLAY MODE
It can display the sound quality Gp and WiFi frequency channel.
NEL DISPLAY MODE
It can display the sound quality Gp and WiFi frequency channel.
Procedure:
1. Press the [
1. Press the [
?/1
] key to turn the power on.
2. Press three keys of the [AUDIO IN], [VOL−] and [VOL+] si-
multaneously for three seconds.
3. Sound quality Gp and Wi-Fi frequency channel is shown by
the blinking of LEDs.
Sound Quality Gp
Blinking LED
Destination
3
PARTY (Green color)
US, Canadian,
Australian
Australian
4
PARTY (Red color)
AEP, UK
Wi-Fi frequency
Channel
Blinking LED
Destination
1–11 ch
Illumination (Blue color)
US, Canadian
1–13 ch
Illumination (White color)
AEP, UK,
Australian
Australian
Releasing method:
Press the [
Press the [
?/1
] key to turn the power off, or press three keys of
the [AUDIO IN], [VOL−] and [VOL+] simultaneously for three
seconds.
seconds.
KEY LED TEST
It can test the keys and LEDs.
It can test the keys and LEDs.
Procedure:
1. Press the [
1. Press the [
?/1
] key to turn the power on.
2. Press three keys of the [PARTY], [WPS] and [VOL−] simul-
taneously for three seconds.
3. All LEDs light up, and enter the key LED test mode.
4. Each time a key is pressed or a switch is slide, state of LEDs
4. Each time a key is pressed or a switch is slide, state of LEDs
changes as follows.
5. When all key is pressed and all switch is slide, all LEDs blink.
Releasing method:
Disconnect the AC adaptor to turn the AC off, or three keys of the
[PARTY], [WPS] and [VOL−] simultaneously for three seconds.
Disconnect the AC adaptor to turn the AC off, or three keys of the
[PARTY], [WPS] and [VOL−] simultaneously for three seconds.
?/1
LED
PARTY LED
UPDATE LED
LINK LED
AUDIO IN
LED
ILLUMINATION
LED
Red
Green
Red
Green
Red
Green
Red
Green
Green
Blue
White
?/1
key
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
PARTY key
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
UPDATE key
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
WPS key
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
AUDIO IN key
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
OFF
OFF
VOL− key
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
VOL+ key
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ALL RESET key
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
STANDBY MODE
switch
(NETWORK
STANDBY)
switch
(NETWORK
STANDBY)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
STANDBY MODE
switch
(STANDBY)
switch
(STANDBY)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
Click on the first or last page to see other SA-NS410 service manuals if exist.