Sony NWZ-E463 / NWZ-E463HK / NWZ-E463K / NWZ-E464 / NWZ-E464K / NWZ-E465 Service Manual ▷ View online
NWZ-E463/E463HK/E463K/E464/E464K/E465
17
4-1-3. Standby current check (DSVCHK)
This mode is used in case standby current is checked.
This mode is used in case standby current is checked.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “POWER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “DSVCHK”.
4. Press the [
u
] key, enter the state of the deep sleep.
5. Press the [BACK] key, release the state of the deep sleep.
Screen display
POWER DSVCHK
OK
6. Press the [BACK] key, return to minor item selection screen.
4-1-4. Charge current check (CHGCHK)
This mode is used in case charge current is checked.
This mode is used in case charge current is checked.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “POWER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “CHGCHK”.
4. Press the [
u
] key, the charge setting is displayed.
Screen display
POWER CHGCHK
AC
AC
5. In this state, each time the [
B
] key is pressed, the port setting
for the charge is changed as shown in the table below.
Port control
Display
CHG_XCHGEN
CHG_PEN1
CHG_PEN2
AC
L
H
H
USB500
L
H
H
USB100
L
H
L
6. Press the [BACK] key, return to minor item selection screen.
4-1-5. Battery voltage detection check (BATTCHK)
This mode is used in case battery voltage is checked.
This mode is used in case battery voltage is checked.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “POWER”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys key to select the “BATTCHK”.
4. Press the [
u
] key, the battery voltage is displayed.
When the battery voltage cannot be confi rmed, “ERROR” is
displayed.
displayed.
Screen display
POWER BATTCHK
X.XXXV
X.XXXV: Battery voltage
5. Press the [BACK] key, return to minor item selection screen.
4-1-6. Battery separation (RMVBATT)
When the battery is removed, this mode is used.
When the battery is removed, this mode is used.
Note: Not used for the servicing.
4-2. Audio (AUDIO)
While playing the audio track, it’s in a repeat state. If [BACK] key
is pressed, it’s stopped.
Press the [
While playing the audio track, it’s in a repeat state. If [BACK] key
is pressed, it’s stopped.
Press the [
b
] key to switch the HPOUT/LINEOUT/SPEAKER.
Screen display
MPTAPP (X.XX.XX)
POWER
AUDIO
AUDIO
OUTPUT
VIDEO
SN
VIDEO
OUT F1
OTHER
F2
CLESTE
SEPLR
DAC
SEPRL
DIREC
MAXOUT
FM
NMLZR
SHUTDOWN
SPCHK
EXITTEST SPKCHK
USER1
USER2
USER3
NWZ-E463/E463HK/E463K/E464/E464K/E465
18
4-2-1. Output check (OUTPUT)
“1 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
“1 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “OUTPUT”.
4. Press the [
u
] key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 25”
audio signal is outputted.
Screen display
AUDIO OUTPUT
1kHz 0dBs L/Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-2. S/N check (SN)
“Infi nity Zero VOLUME: 25” audio signal is outputted.
“Infi nity Zero VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “SN”.
4. Press the [
u
] key, “Infi nity Zero VOLUME: 25” audio signal
is outputted.
Screen display
AUDIO SN
Infi nity Zero
HPOUT [ VOL: 25 ]
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-3. Frequency characteristic 1 check (F1)
“20 Hz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
“20 Hz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “F1”.
4. Press
the
[
u
] key, “20 Hz 0 dBs L-ch/R-ch VOLUME: 25”
audio signal is outputted.
Screen display
AUDIO F1
20Hz 0dBs L/Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-4. Frequency characteristic 2 check (F2)
“20 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is output-
ted.
“20 kHz 0 dBs L-ch/R-ch VOLUME: 25” audio signal is output-
ted.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “F2”.
4. Press
the
[
u
] key, “20 kHz 0 dBs L-ch/R-ch VOLUME: 25”
audio signal is outputted.
Screen display
AUDIO F2
20kHz 0dBs L/Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK] key, return to minor item selection screen.
NWZ-E463/E463HK/E463K/E464/E464K/E465
19
4-2-5. CH separation (L-ch) check (SEPLR)
“1 kHz 0 dBs L-ch VOLUME: 25” audio signal is outputted.
“1 kHz 0 dBs L-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “SEPLR”.
4. Press the [
u
] key, “1 kHz 0 dBs L-ch VOLUME: 25” audio
signal is outputted.
Screen display
AUDIO SEPLR
1kHz 0dBs Lch
1kHz 0dBs Lch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-6. CH separation (R-ch) check (SEPRL)
“1 kHz 0 dBs R-ch VOLUME: 25” audio signal is outputted.
“1 kHz 0 dBs R-ch VOLUME: 25” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “SEPRL”.
4. Press
the
[
u
] key, “1 kHz 0 dBs R-ch VOLUME: 25” audio
signal is outputted.
Screen display
AUDIO SEPRL
1kHz 0dBs Rch
HPOUT [ VOL: 25 ]
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-7. Maximum output check (MAXOUT)
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” (Headphone output when
AVLS operates: “1 kHz 0 dBs L-ch/R-ch VOLUME: 13”) audio
signal is outputted.
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” (Headphone output when
AVLS operates: “1 kHz 0 dBs L-ch/R-ch VOLUME: 13”) audio
signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “MAXOUT”.
4. Press
the
[
u
] key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30”
(Headphone output when AVLS operates: “1 kHz 0 dBs L-
ch/R-ch VOLUME: 13”) audio signal is outputted.
ch/R-ch VOLUME: 13”) audio signal is outputted.
Screen display
AUDIO MAXOUT
1kHz 0dBs L/Rch
1kHz 0dBs L/Rch
HPOUT [ VOL: 30 ]
AVLS OFF
START
5. In this state, each time the [
B
] key is pressed, AVLS on/off
switch is performed.
6. Press the [BACK] key, return to minor item selection screen.
4-2-8. Normalizer check (NMLZR)
“1 kHz –24 dBs L-ch/R-ch VOLUME: 30” audio signal is output-
ted.
“1 kHz –24 dBs L-ch/R-ch VOLUME: 30” audio signal is output-
ted.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “NMLZR”.
4. Press
the
[
u
] key, “1 kHz –24 dBs L-ch/R-ch VOLUME: 30”
audio signal is outputted.
Screen display
AUDIO NMLZR
1kHz –24dBs L/Rch
HPOUT [ VOL: 30 ]
START
5. Press the [BACK] key, return to minor item selection screen.
NWZ-E463/E463HK/E463K/E464/E464K/E465
20
4-2-9. Sound pressure regulation level check (SPCHK)
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “SPCHK”.
4. Press the [
u
] key, “1 kHz 0 dBs L-ch/R-ch VOLUME: 30”
audio signal is outputted.
Screen display
AUDIO SPCHK
1kHz 0dBs L/Rch
HPOUT [ VOL: 30 ]
START
5. Press the [BACK] key, return to minor item selection screen.
4-2-10. Speaker check
“20
“20
20kHz 0dBs L-ch/R-ch VOLUME: 30” audio signal is out-
putted.
Note: Not used for the servicing.
4-2-11. User specifi cation contents playback 1 (USER1)
“/User1.oma” is reproduced.
“/User1.oma” is reproduced.
Checking method:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “USER1”.
4. Press the [
u
] key, “/User1.oma” is reproduced.
Screen display
AUDIO USER1
HPOUT [ VOL: 15 ]
XX:XX
START
XX:XX : Repetition expert totaling time
5. Press the [BACK] key, return to minor item selection screen.
4-2-12. User specifi cation contents playback 2 (USER2)
“/User2.oma” is reproduced.
“/User2.oma” is reproduced.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “USER2”.
4. Press the [
u
] key, “/User2.oma” is reproduced.
Screen display
AUDIO USER2
HPOUT [ VOL: 15 ]
XX:XX
START
XX:XX : Repetition expert totaling time
5. Press the [BACK] key, return to minor item selection screen.
4-2-13. User specifi cation contents playback 3 (USER3)
“/User3.oma” is reproduced.
“/User3.oma” is reproduced.
Checking method:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
]/[
V
] keys to select the “AUDIO”, and press the
[
B
] key to enter the minor item.
3. Press the [
v
]/[
V
] keys to select the “USER3”.
4. Press the [
u
] key, “/User3.oma” is reproduced.
Screen display
AUDIO USER3
HPOUT [ VOL: 15 ]
XX:XX
START
XX:XX : Repetition expert totaling time
5. Press the [BACK] key, return to minor item selection screen.
Click on the first or last page to see other NWZ-E463 / NWZ-E463HK / NWZ-E463K / NWZ-E464 / NWZ-E464K / NWZ-E465 service manuals if exist.