Sony MHC-V5 Service Manual ▷ View online
MHC-V5
9
2-3. TOP PANEL BLOCK
1 three screws
(BVTP3
(BVTP3
u 10)
4 cushion (H)
cushion (H)
heat sink
3 Remove the top panel block
in the direction of the arrow.
5 flexible flat
cable
cable
(4P)
(CN2102)
2 five claws
7 top panel block
flexible flat cable (4P)
6 flexible flat
cable
cable
(15P)
(CN2100)
Terminal face is
below side.
below side.
WireVeWWiQJ
guide line
guide line
guide line
guide line
–
7RSreDrYieZ–
Note 1: Fix the cushion (H) so that
the flexible flat cable does not
come in contact with the heat sink.
flexible flat cable
(15P)
(15P)
Note 2: When installing the flexible flat cable, ensure that
the colored line is not slanted after insertion.
colored line
colored line
Insert is straight to the interior.
Insert is incline
flexible flat
cable
cable
connector
connector
OK
NG
WireVeWWiQJ
Terminal face is
below side.
below side.
–
7RSSDQeOEORFN
ERWWRPYieZ–
flexible flat
cable
cable
TOP KEY A board
Ver. 1.1
MHC-V5
10
2-4. LOADING PANEL BLOCK
1 Insert the clip etc. in the hole,
and push the lever in the direction
of the arrow.
2 Draw out the tray.
tray
CD mechanism deck
thin wire (clip etc. )
–
Top view
–
–
Left view
–
hole
3 two
claws
claws
4 loading panel block
8 cm or more
hole
MHC-V5
11
2-5. CDM BLOCK-1
•
Continued on 2-6 (page 12).
Note 1: Before disconnecting fl exible fl at cable (24P) (CN302), solder the short-land.
– Top rear view –
3 Remove the chuck cap
in the direction
of the arrow.
4 chuck cap
2 claw
2 claw
2 claw
Note 3: When installing
the chuck cap,
align the triangle
marks.
OK
NG
5 Solder the short-land.
Note 2: When assembling the CDM
block, remove the solder of
short-land after connecting
flexible flat cable (24P)
(CN302).
Solder is removed cleanly.
Solder is not removed.
OK
NG
1 cushion (E)
cushion (E)
guide line
Note 4: Cushion (E) is deleted from
the midway of production.
Ver. 1.1
MHC-V5
12
2-6. CDM BLOCK-2
3 Remove the CDM block
in the direction of the arrow.
5 flexible flat cable
(5P)
(CN303)
6 flexible flat cable
(24P)
(CN302)
7 CDM block
CDM block
WireVeWWiQJ
ARAGON board
–7RSreDrYieZ–
1 two screws
(BVTP3
u 10)
2 two hooks
1 screw
(BVTP3
u 10)
4 connector
(CN401)
1 screw
(BVTP3
u 10)
Note 2: When installing the flexible flat cable, ensure that
the colored line is not slanted after insertion.
colored line
colored line
Insert is straight to the interior.
Insert is incline
flexible flat
cable
cable
flexible flat
cable
cable
connector
connector
OK
NG
Note 1: Connect the wire from the CDM
block to the ARAGON board and
place it neatly inside the CDM
block.
Note 3: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
Insert is shallow
Insert is straight
to the interior.
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
OK
NG
NG
Click on the first or last page to see other MHC-V5 service manuals if exist.