Sony HCD-V8900 / HCD-V8900AV / LBT-V8900AV Service Manual ▷ View online
– 5 –
SECTION 2
DISASSEMBLY
Note:
Follow the disassembly procedure in the numerical order given.
2-1. FRONT PANEL
1
Three flat type wires
(CN401, CN402, CN701)
3
Front panel
2
Four screws (BVTP3x8)
This section is extracted from
instruction manual.
instruction manual.
– 6 –
2-2. MAIN BOARD
3
Three screws
(BVTP2.6x8)
2
Open the cassette lids.
1
Push the two buttons.
4
Three screws (BVTP2.6x8)
5
Remove the tape mechanism deck
section to direction of the arrow
A
.
A
2-3. TAPE MECHANISM DECK
9
Connector
(CN601)
4
Power cord
5
Back panel
3
Six screws (BVTP3x8)
2
Twelve screws
(BVTP3x8)
1
Flat type wire (CN851)
!£
MAIN board
6
Connector
(CN961)
8
Connector
(CN830)
!™
Connector
(CN901)
!¡
Two screws
(BVTP3x8)
0
Connector
(CN9001)
7
Flat type wire
(CN801)
– 7 –
2-4. CASSETTE LID ASSEMBLY
2-5. CD LID ASSEMBLY
2
Connector (CN671)
1
Four screws (BVTP2.6x8)
4
CD lid assembly
3
Connector (CN661)
4
Cassette lid assembly
1
Two springs
3
Two bracket
2
Two screws (BVTP2.6x8)
– 8 –
2-6. CD MECHANISM DECK
2-7. BASE UNIT
1
Five screws
(BVTP3x8)
3
Flat type wire
2
CD mechanism
deck
3
Base unit
2
Boss
1
Yoke bracket
2-8. DISC TABLE
Note:
When the disc table is installed, adjust the positions of
roller cam and mark ” as shown in the figure, then set to
the groove of disc table.
roller cam and mark ” as shown in the figure, then set to
the groove of disc table.
1
Screw (BVTP3x8)
2
Bracket (BU)
3
Stop screw
4
Disc table
A
A
Click on the first or last page to see other HCD-V8900 / HCD-V8900AV / LBT-V8900AV service manuals if exist.