Sony HCD-GZR77D / MHC-GZR77D Service Manual ▷ View online
1
2
As illustrated, insert a flathead screwdriver
and give a turn to the left to put the tray out.
and give a turn to the left to put the tray out.
flathead screwdriver
CD tray
HCD-GZR77D
5
SECTION 1
SERVICING NOTES
Notes on Disconnecting Between the OP Section (DVBU101) and the DMB19 Board
Note: When disconnecting between the OP section (DVBU101) and the DMB19 board, be sure to make a solder brige for electrostatic
Note: When disconnecting between the OP section (DVBU101) and the DMB19 board, be sure to make a solder brige for electrostatic
prevention as illustrated in the fi gure (before disconnection).
On the contrary, when installing the OP section, never remove the solder bride until the OP section and the DMB19 board are
connected.
Be sure to remove the solder bridge after the OP section and the DMB19 board have been connected.
Manual Opening and Closing the CD Tray
As illustrated, insert a fl athead screwdriver and give a turn to the left to put the CD tray out.
As illustrated, insert a fl athead screwdriver and give a turn to the left to put the CD tray out.
Perform solder bridging to prevent damage by electrostatic
discharge when handling the BU as a single unit.
discharge when handling the BU as a single unit.
DMB19 board
HCD-GZR77D
6
Service Position for the BU
HCD-GZR77D
7
SECTION 2
DISASSEMBLY
•
This set can be disassembled in the order shown below.
2-1. CASE
(SIDE-L),
CASE
(SIDE-R)
(Page
8)
2-2. TOP PANEL SECTION
(Page
(Page
8)
SET
2-3. LOADING
PANEL
(Page
9)
2-4. CHASSIS
(Page
(Page
9)
2-14. TC-AMP BOARD
(Page
(Page
14)
2-15. TAPE MECHANISM DECK
(Page
(Page
15)
2-16. LID (TC-L),
LID
LID
(TC-R)
(Page
15)
2-23. BASE UNIT
(Page
(Page
19)
2-24. OPTICAL PICK-UP
(Page
(Page
19)
2-21. CHASSIS
(Page
(Page
18)
2-22. DMB19 BOARD
(Page
(Page
18)
2-19. MOTOR (TB) BOARD
(Page
(Page
17)
2-20. MOTOR (LD) BOARD
(Page
(Page
17)
2-18. SENSOR BOARD
(Page
(Page
16)
2-5. FRONT PANEL SECTION
(Page
(Page
10)
2-11. PANEL (FL) SECTION
(Page
(Page
13)
2-10. MIC BOARD,
USB-LED
USB-LED
BOARD
(Page
12)
2-12. FL BOARD
(Page
(Page
13)
2-13. FRONT BOARD,
VOLUME
VOLUME
BOARD
(Page
14)
2-7. MAIN
BOARD
(Page
11)
2-6. BACK PANEL SECTION
(Page
(Page
10)
2-8. POWER
AMP
BOARD
(Page
11)
2-9. DVD MECHANISM DECK,
TUNER
TUNER
(TM901)
(Page
12)
2-17. DRIVER BOARD,
SW
SW
BOARD
(Page
16)
HCD-GZR77D
8
Note: Follow the disassembly procedure in the numerical order given.
2-1. CASE (SIDE-L), CASE (SIDE-R)
2-2. TOP PANEL SECTION
Ver. 1.1
1 three screws
(case 3 TP2)
2 three screws
(+P
3
u5)
5 case (side-L)
0 case (side-R)
6 three screws
(case 3 TP2)
7 three screws
(+P
3
u5)
3
8
9
4
1 screw
(+BVTP
3
u6)
9 top panel section
4 claw
7 wire (flat type) (11 core)
(CN102)
8 wire (flat type) (11 core)
(CN621)
5 claw
2 screw
(+PWH
3
u8)
3 screw
(+PWH
3
u8)
two hooks
6
Click on the first or last page to see other HCD-GZR77D / MHC-GZR77D service manuals if exist.