Sony HCD-CZ1 / NAS-CZ1 Service Manual ▷ View online
13
HCD-CZ1/NAS-CZ1
6 Select “M-crew Server task tray icon” from the “Programs” list,
then click the [OK] button.
Make sure that the M-crew Server task tray icon appears and is
checked in the “Program and service” list in the “Exceptions”
tab of the “Windows Firewall” dialog.
Make sure that the M-crew Server task tray icon appears and is
checked in the “Program and service” list in the “Exceptions”
tab of the “Windows Firewall” dialog.
7 Click [OK].
• If the installation is still unsuccessful after all that you
have done.
1 Click [Start] – [Control Panel] in that order.
“Control Panel” window appears.
2 When Windows XP is in Classic View, switch to Category View,
then click [Add or Remove Programs].
“Add or Remove Programs” window appears.
“Add or Remove Programs” window appears.
3 Select and click “M-crew Server” in the “Currently Installed
Programs” list.
When “M-crew Server” does not appear in the “Currently
Installed Programs” list, click [Change/Remove] and proceed to
step 6.
When “M-crew Server” does not appear in the “Currently
Installed Programs” list, click [Change/Remove] and proceed to
step 6.
4 Click [Change/Remove].
5 Follow the on-screen messages and restart your computer.
6 When the computer restarts, installation again. (See “Installing
M-crew Server” on page 8.)
• If the installation seems to be stopped
The installation may take 10 minutes or more depending on your
computer or CD-ROM drive. During the installation, watch out for
the occurrence of any of the following problems.
computer or CD-ROM drive. During the installation, watch out for
the occurrence of any of the following problems.
“No Server” appears on the NAS-CZ1.
• The progress bar on the display is not moving. The
access lamp has not lit for a few minutes.
The installation is progressing normally. Please wait.
• M-crew Server may not be recognizing the system.
When communication is limited by firewall software other than
the OS functions, enable the following .exe files. For a detailed
description of the setting method, see the operation manual of the
firewall software used.
– McrewServer.exe
– McTaskTray.exe
– McService.exe
– McFolderWatcher.exe
– McrewHttpService.exe
– McrewUPnPService.exe
the OS functions, enable the following .exe files. For a detailed
description of the setting method, see the operation manual of the
firewall software used.
– McrewServer.exe
– McTaskTray.exe
– McService.exe
– McFolderWatcher.exe
– McrewHttpService.exe
– McrewUPnPService.exe
There is no sound from the system
• This M-crew Server is not selected by the server
selection on the system side.
For details, refer to the operating instructions provided with the system.
• The server side system registration is not correct.
1 Check the connection between the system and your computer.
To check the optimum connection method, click [Start] – [All
Programs] – [M-crew Server] – [MANUAL] – [Connection
Manual] in that order.
Programs] – [M-crew Server] – [MANUAL] – [Connection
Manual] in that order.
2 Turn on the system.
The system is registered automatically on your computer.
The server side must also be set when performing system
registration manually. See “Registering the system on your
computer manually” on page 14.
registration manually. See “Registering the system on your
computer manually” on page 14.
• Make sure the system is properly connected. (Refer to
the connection manual. Also check your computer's
network settings.)
network settings.)
• Check for the M-crew Server task tray icon.
Refer to the startup instructions. Also refer to “Task tray icon not
present” on page 24.
present” on page 24.
• Make sure the M-crew Server task tray icon is lighting.
Refer to the update instructions. Also refer to “Task tray icon
darkened” on page 24.
darkened” on page 24.
• Make sure the system is registered in M-crew Server.
Refer to the instructions for confirming registration.
• Restart your computer.
• Cannot listen to Web Radio
Make sure that the computer’s internet access is correct.
If using a proxy server, make sure that the proxy server is set
correctly in the “PROXY SETTING” dialog box.
If using a proxy server, make sure that the proxy server is set
correctly in the “PROXY SETTING” dialog box.
Task tray icon not present
Task tray icon darkened
Cannot uninstall M-crew Server
• Follow the procedure below to display the icon again.
Click [Start] – [All Programs] – [M-crew Server] –
[TOOLS] – [M-crew Server task tray icon] in that order.
[TOOLS] – [M-crew Server task tray icon] in that order.
• Uninstall M-crew Server and re-install it.
The service is not active. Troubleshoot it by checking the following
items.
items.
• Right-click the task tray icon. Click [Start Music
Service].
• Click [Start] – [All Programs] – [M-crew Server] –
[TOOLS] – [ICF Settings] in that order and check the
port.
port.
• Uninstall M-crew Server and re-install it.
1 Stop the service from the task tray icon.
Right-click the task tray icon, then click “Stop Music Service”
in the menu.
in the menu.
2 Hide the task tray icon.
Right-click the task tray icon, then click [Hide Task Tray icon]
in the menu.
in the menu.
3 When Windows XP is in Classic View, switch to Category View,
then click [Start] – [Control Panel] – [Add or Remove
Programs] in that order.
Select the desired program and remove it.
Programs] in that order.
Select the desired program and remove it.
14
HCD-CZ1/NAS-CZ1
CD MECHANISM DECK (BU-K7BD81B) SERVICE
POSITION
• In checking the CD mechanism deck (BU-K7BD81B), prepare
POSITION
• In checking the CD mechanism deck (BU-K7BD81B), prepare
extension jig (Part No. J-2501-248-A: 1mm Pitch, 27 cores, Length
300mm).
300mm).
CD board
(CN201)
(CN201)
CD mechanism deck
(BU-K7BD81B)
(BU-K7BD81B)
MAIN board
(CN700)
(CN700)
MAIN board
(CN603 1pin, 2pin)
(CN603 1pin, 2pin)
Connect extension jig (J-2501-248-A) to the
CD board (CN201) and MAIN board (CN700).
CD board (CN201) and MAIN board (CN700).
If operating the CD,
solder-bridge the MAIN board
(CN603 1pin, 2pin).
solder-bridge the MAIN board
(CN603 1pin, 2pin).
ALL BOARDS SERVICE POSITION
• In checking the FL board FRONT PANEL board and MAIN
• In checking the FL board FRONT PANEL board and MAIN
boards, prepare two extension jigs (Part No. J-2501-077-A:
1.25mm Pitch, 13 cores, Length 300mm and Part No. J-2501-
009-A: 1.25mm Pitch, 15 cores, Length 300mm).
1.25mm Pitch, 13 cores, Length 300mm and Part No. J-2501-
009-A: 1.25mm Pitch, 15 cores, Length 300mm).
MAIN board
(CN602)
(CN602)
MAIN board
(CN601)
(CN601)
PSAMP board
SUBPS board
FL board
(CN1001)
(CN1001)
FRONT PANEL board
(CN1201)
(CN1201)
Connect extension jig (J-2501-077-A) to the
FL board (CN1001) and MAIN board (CN602).
FL board (CN1001) and MAIN board (CN602).
Connect extension jig (J-2501-009-A) to the
FRONT PANEL board (CN1201) and MAIN board (CN601).
FRONT PANEL board (CN1201) and MAIN board (CN601).
TOP PANEL board
ETHER board
CD board
15
HCD-CZ1/NAS-CZ1
SECTION 2
GENERAL
This section is extracted from
instruction manual.
instruction manual.
Main unit
Display window 9
FUNCTION 2
NETWORK 5
NETWORK lamp 5
FUNCTION 2
NETWORK 5
NETWORK lamp 5
PHONES jack q;
Remote sensor 8
USER PROFILE 1 – 5 3
VOL +/– 7
Remote sensor 8
USER PROFILE 1 – 5 3
VOL +/– 7
?/1 (On/Standby) 1
Z PUSH OPEN 4
N (play) 6
x (stop) 6
Z PUSH OPEN 4
N (play) 6
x (stop) 6
ALPHABETICAL ORDER
A – O
P – Z
BUTTON DESCRIPTIONS
1
2
3
4
5
q;
6
7
8
9
•
Location of controlls
16
HCD-CZ1/NAS-CZ1
Remote control
ALBUM +/– 9
DISPLAY 2
DSGX qf
ENTER 8
FAVORITE
DISPLAY 2
DSGX qf
ENTER 8
FAVORITE
ADD q;
CALL q;
DELETE q;
CALL q;
DELETE q;
FM MODE qj
FUNCTION wd
LIBRARY
FUNCTION wd
LIBRARY
MODE wa
SEARCH wa
SEARCH wa
NETWORK qa
MENU 7
PRESET EQ 3
REPEAT qj
SCROLL qd
SLEEP qs
TUNER BAND qg
TUNER MEMORY 5
TUNING MODE qh
TUNING +/– ql
USER PROFILE ws
VOL +/– 4
MENU 7
PRESET EQ 3
REPEAT qj
SCROLL qd
SLEEP qs
TUNER BAND qg
TUNER MEMORY 5
TUNING MODE qh
TUNING +/– ql
USER PROFILE ws
VOL +/– 4
?/1 (On/Standby) 1
1/ALL 6
m/M (rewind/fast forward)
1/ALL 6
m/M (rewind/fast forward)
qk
TCURSOR/CURSORt qk
./> (go back/go forward)*
./> (go back/go forward)*
ql
N (play)* w;
X (pause) w;
x (stop) w;
* The N and . buttons have
X (pause) w;
x (stop) w;
* The N and . buttons have
tactile dots. Use the tactile dots
as a reference when operating
the system.
as a reference when operating
the system.
ALPHABETICAL ORDER
A – M
N – Z
BUTTON DESCRIPTIONS
1
2
4
3
5
6
7
9
0
8
qa
qg
qh
qj
w;
wa
ws
qs
qd
qf
wd
ql
qk
Click on the first or last page to see other HCD-CZ1 / NAS-CZ1 service manuals if exist.