Sony HBD-EF1100 Service Manual ▷ View online
HBD-EF1100
21
SECTION 3
TEST MODE
COLD RESET
The cold reset clears certain data in this system without initialize
Personal Information and some BD operation data. Execute this
mode when returning the unit to the customers.
Procedure:
1. Press the [
The cold reset clears certain data in this system without initialize
Personal Information and some BD operation data. Execute this
mode when returning the unit to the customers.
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [
x
] and [VOL –] buttons simultaneously and hold
down (around 5 seconds).
3. The message “WAIT” appears then “RESET” appears on fl uo-
rescent indicator tube, then becomes standby states.
DEMO MODE
This mode let you lock the disc tray. When this mode is activated,
the disc will not eject when the [
This mode let you lock the disc tray. When this mode is activated,
the disc will not eject when the [
Z
] button is pressed. The message
“D. LOCK” will be displayed on the fluorescent indicator tube.
Procedure:
1. Press the [
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to select the “BD/DVD”.
3. Insert a disc.
4. During stop condition, press the [
3. Insert a disc.
4. During stop condition, press the [
x
] and [
Z
] buttons
simultaneously and hold down (around 5 seconds) until
“D. LOCK” displayed on the fluorescent indicator tube.
“D. LOCK” displayed on the fluorescent indicator tube.
Releasing method:
Press the [
Press the [
x
] and [
Z
] buttons simultaneously and hold down
(around 5 seconds) until “D. OFF” displayed on the fl uorescent
indicator tube.
indicator tube.
PANEL TEST
Procedure:
1. Press the [
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press button in order of the [DISPLAY]
[0] [0] [1]
[SUBTITLE] on the remote commander (Make the interval
when each button is pressed within two seconds).
when each button is pressed within two seconds).
3. All segments in fl uorescent indicator tube are lighted up. And
half segments in fl uorescent indicator tube are lighted up, oth-
ers half segments in fl uorescent indicator tube are lighted up,
then all segments in fl uorescent indicator tube are lighted up.
This operation is repeated.
ers half segments in fl uorescent indicator tube are lighted up,
then all segments in fl uorescent indicator tube are lighted up.
This operation is repeated.
4. In the state of step 3, press the [VOL +] button on the remote
commander and model information is displayed on the fl uores-
cent indicator tube.
cent indicator tube.
Each time the [VOL +] button on the remote commander is
pressed, the display changes from destination information,
STR version, special mode in this order, and returns to the
model information display.
pressed, the display changes from destination information,
STR version, special mode in this order, and returns to the
model information display.
5. In the state of step 3, press the [FUNCTION] button on the
remote commander and “K 0” is displayed on the fluorescent
indicator tube.
indicator tube.
“K 0” value increases whenever a button or sensor on the unit
is pressed. However, once a button or sensor has been pressed,
it is no longed taken into account.
is pressed. However, once a button or sensor has been pressed,
it is no longed taken into account.
All button and sensors on the unit are pressed, “OK” and “K 9”
are alternately displayed on the fluorescent indicator tube.
are alternately displayed on the fluorescent indicator tube.
Releasing method:
To release from this mode, press the [
To release from this mode, press the [
?/1
] button.
FACTORY INITIALIZE
Return all of the unit setting to their factory defaults.
Return all of the unit setting to their factory defaults.
Note 1: Disconnect the following connections when you use this mode.
USB
LAN
Note 2: The operation in this mode must use a remote commander and TV
monitor.
Procedure:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Press the [HOME] button on the remote commander, and the
home menu is displayed.
3. Select
“Setup”
“Resetting”, and press the [ ] button on the
remote commander.
4. Select “Initialize Personal Information”, and press the [ ]
button on the remote commander.
5. Select “OK”, and press the [ ] button on the remote com-
mander.
Resetting
Easy Network Settings
Initialize Personal Information
OK
Cancel
The information below will be deleted.
Do you want to proceed?
- Playback history
- Internet video utilization information
Do you want to proceed?
- Playback history
- Internet video utilization information
Initialize Personal Information
Delete personal data when disposing
Delete personal data when disposing
Reset to Factory Default Settings
HBD-EF1100
22
BD SERVICE MODE
Note: The operation in this mode must use a remote commander and TV
monitor.
Setting method of the BD service mode:
1. Connect this unit with TV monitor.
2. Press the [
1. Connect this unit with TV monitor.
2. Press the [
?/1
] button to turn the power on.
3. Press button in order of the [DISPLAY]
[0] [2] [1]
[SUBTITLE] on the remote commander. (Make the interval
when each button is pressed within two seconds)
when each button is pressed within two seconds)
4. Enter the BD service mode. The OSD menu on TV monitor
can be operated by remote commander.
1. Main Functions
• Diag
• Diag
Performs unit test of devices installed on the board.
• Log
Error log is displayed. Displayed contents can also be saved in
an USB memory device.
an USB memory device.
• Factory
Initialize
Restores the unit to its factory settings.
• Network
Checks the wired network connection.
• Version
Up
• System
Information
Displays the system information of the unit.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
• EMC
Test
Mode
Not
used.
• Drive
Write drive OP data and check drive.
• HDD
Mode
Not
used.
6. The message “Close” appears, and press the [ ] button on the
remote commander.
7. Select “Reset to Factory Default Settings”, and press the [ ]
button on the remote commander.
8. Select “All Settings”, and press the [ ] button on the remote
commander.
9. Select “Start”, and press the [ ] button on the remote com-
mander.
10. Initialization ends when the message “HELLO” on the
fl uorescent indicator tube disappears.
Initialize Personal Information
Close
Initialization complete.
Initialize Personal Information
Reset to Factory Default Settings
Restore each setting to the factory d
Restore each setting to the factory d
Reset to Factory Default Settings
Screen Settings
Audio Settings
BD/DVD Viewing Settings
Parental Control Settings
System Settings
Network Settings
All Settings
Audio Settings
BD/DVD Viewing Settings
Parental Control Settings
System Settings
Network Settings
All Settings
All Settings
Restore all settings to the factory default
settings. The system will turn off after
reset.
settings. The system will turn off after
reset.
Start
Cancel
HBD-EF1100
23
2. Menu Tree
Version Up
DISC update
DISC update
System Information
Displays system information
Displays system information
Factory Initialize
,QLWLDOL]HGHIDXOWVHWWLQJ
,QLWLDOL]HGHIDXOWVHWWLQJ
LoJ
Displays Error /RJ
Displays Error /RJ
Error LoJ
Displays error loJ
DiaJ
Network
1Htwork diDJQRVLVIRUZLUHG
1Htwork diDJQRVLVIRUZLUHG
3LQJ
&RQILUPQHWZRUNFRQQHFWLRQ
,IFRQILJ
View network status
Device Test
86%'$&,)FRQ0,&0),,3&
([WHUQDO+'0,7UDQVFRGHUWHVW
86%'$&,)FRQ0,&0),,3&
([WHUQDO+'0,7UDQVFRGHUWHVW
Video Test
Video output test
Video output test
$udio Test
$udio output test
$udio output test
$udio Input Test
$XGLR,QSXW7HVW
$XGLR,QSXW7HVW
:LUHOHVV/$17HVW
Only wireless model used
Only wireless model used
(0&7HVW0RGH
Not used
Not used
Drive
Write drive OP data and check drive
Write drive OP data and check drive
Start Update
6WDUWGLVFXSJUDGH
Start Initialize
,QLWLDOL]HGHIDXOWVHWWLQJIRUWKHXQLW
'LDJ7HVW
0LF7HVW
Not used
Not used
+'0,,QSXW7HVW
Not used
Not used
Transcorder Test
Not used
Not used
Service 0ode 0enu
[1] DiaJ
[2] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[1] DiaJ
[2] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
Service 0ode 0enu
[1] DiaJ
[2] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] (0&7HVW0RGH
[8] Drive
>@+''0RGH
[1] DiaJ
[2] LoJ
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] (0&7HVW0RGH
[8] Drive
>@+''0RGH
+''0RGH
Not used
Not used
+''/RJ
1RWXVHG
%OXHWRRWK'HYLFH7HVW
HBD-EF1100
24
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1]
Moves to Diag screen
[2]
Moves to Log screen
[3]
Moves to Factory Initialize screen
[4]
Moves to Network screen
[5]
Moves to Version Up (DISC version update) screen
[6]
Moves to System Information screen
[7]
Moves to EMC test mode screen (Not used)
[8]
Moves to Drive screen
[9]
Moves to HDD mode (Not used)
[
M
]/[
m
] Moves the cursor
[ ]
Moves to the screen of the item selected with the cursor
* Cursor is not displayed when the menu is fi rst displayed.
4. Diag (Device Test)
This screen is used to test devices mounted on the board.
This screen is used to test devices mounted on the board.
Screen 1: Selects the test category
Operation:
[
Operation:
[
<
]/[
,
] Selects the category
[
m
]/[ ]
Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
Selects the device to test after selecting Device Test in screen 1.
Operation:
[
<
]/[
,
] Selects the device to test
[ ]
Executes the test
[M]
Returns to selection of test category
[RETURN] Returns to selection of test category
• List of test categories
Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test
Mic Test (Not used)
HDMI Input Test (Not used)
Transcorder Test (Not used)
Bluetooth Device Test
Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test
Mic Test (Not used)
HDMI Input Test (Not used)
Transcorder Test (Not used)
Bluetooth Device Test
• Device Test: List of devices
USB Host
USB Host
: USB media check (front). Only one time.
5. Diag (Video/Audio Test)
This screen performs video and audio tests.
This screen performs video and audio tests.
Screen 1: When video test category is selected
Operation:
[ ]
Operation:
[ ]
Shows Color Bar
[
M
]/[RETURN] Returns to the selection of test category
Screen 2: When audio test category is selected
Operation:
[ ] Generate
Operation:
[ ] Generate
TONE
Sound
[
M
]/[RETURN] Returns to the selection of test category
• Video
test:
Outputs a color bar (HDMI).
• Audio
test:
TONE sound output (speaker & HDMI).
Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[7] EMC Test Mode
[8] Drive
[9] HDD mode
HELP : [UP] [DOWN] [ENT] [NUM]
HELP (currently available keys, etc.) is displayed
[1] Diag
Diag
Category:
Diag
Category: Device Test
Device:
Front USB Media check ... OK
Checking...
HELP: [RIGHT] [UP] [ENT] [RET]
USB Host
Device Test
(Screen 1)
(Screen 2)
Diag
Category: Video Test
HELP: [UP][ENT][RET]
Diag
Category: Audio Test
HELP: [UP] [ENT] [RET]
[ENT] Show Color Bar
[ENT] Generate TONE Sound
(Screen 1)
(Screen 2)
Click on the first or last page to see other HBD-EF1100 service manuals if exist.