Sony DHC-AZ33D / HCD-AZ33D Service Manual ▷ View online
HCD-AZ33D
9
Rear panel
DMPORT (DIGITAL MEDIA
PORT)
PORT)
Connect the DIGITAL MEDIA PORT
adaptor (not supplied). You need to
connect the DIGITAL MEDIA PORT
adaptor to an optional audio device
(portable audio player, etc.).
adaptor (not supplied). You need to
connect the DIGITAL MEDIA PORT
adaptor to an optional audio device
(portable audio player, etc.).
Notes
Available DIGITAL MEDIA PORT
adaptors vary in each area.
adaptors vary in each area.
Do not connect an adaptor other than
the DIGITAL MEDIA PORT adaptor.
Do not connect or disconnect the
DIGITAL MEDIA PORT adaptor
to/from the DMPORT while the system
is on.
to/from the DMPORT while the system
is on.
When using a DIGITAL MEDIA PORT
adaptor (not supplied) that has video
output function, connect the adaptor
directly to the TV.
output function, connect the adaptor
directly to the TV.
DVD/USB DIGITAL OUT jack
Connect the digital optical input jack
of an optional digital component
(such as amplifier). You can enjoy
5.1 channel sound, if the connected
amplifier equipped with Dolby Digital
or DTS decoder.
of an optional digital component
(such as amplifier). You can enjoy
5.1 channel sound, if the connected
amplifier equipped with Dolby Digital
or DTS decoder.
Notes
Sound is output only when the system
function is set to “DVD” or “USB.”
function is set to “DVD” or “USB.”
If you press AUDIO
, SOUND FIELD
or the buttons related to Karaoke
Mode, or if you connect or disconnect
microphones or headphones, the sound
cuts off for a moment.
microphones or headphones, the sound
cuts off for a moment.
S VIDEO OUT jack
Connect the S Video input jack of
the TV. You can enjoy higher quality
video images when you select the
S VIDEO.
the TV. You can enjoy higher quality
video images when you select the
S VIDEO.
VIDEO OUT jack
Connect the video input jack of the
TV or projector.
TV or projector.
COMPONENT VIDEO OUT jacks
Connect the component video input
jacks of the TV or projector. If your
TV accept progressive format signals,
you must use this connection and
press PROGRESSIVE
jacks of the TV or projector. If your
TV accept progressive format signals,
you must use this connection and
press PROGRESSIVE
on the unit
repeatedly to select “P AUTO” or “P
VIDEO.” You can enjoy higher quality
video images.
VIDEO.” You can enjoy higher quality
video images.
VIDEO/SAT OUT L/R jacks
Connect the audio input jacks of an
optional component (such as VCR or
MD deck).
optional component (such as VCR or
MD deck).
VIDEO/SAT IN L/R jacks
Connect the audio output jacks of an
optional component (such as VCR or
satellite tuner).
optional component (such as VCR or
satellite tuner).
SUBWOOFER OUT jack
Connect the audio input jack of an
optional subwoofer*.
optional subwoofer*.
* SA-GNV111D is recommended. In some
areas, the SA-GNV111D may not yet be
available.
available.
Note
The effect may be limited or noise may
occur depending on the connected
subwoofer or the type of music being
played back.
occur depending on the connected
subwoofer or the type of music being
played back.
Setting the clock
Use buttons on the remote to set the
clock.
clock.
1
Press
/
to turn on the
system.
2
Press TIMER MENU
.
The hour indication flashes in the
display.
If “PLAY SET?” flashes in the display,
press
display.
If “PLAY SET?” flashes in the display,
press
or
repeatedly to select
“CLOCK SET?,” then press ENTER
.
3
Press
or
repeatedly to set
the hour.
4
Press ENTER
.
The minute indication flashes in the
display.
display.
5
Press
or
repeatedly to set
the minutes.
6
Press ENTER
.
The clock starts functioning.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
disconnect the power cord or if a power failure
occurs.
To display the clock when the system
is off
is off
Press DISPLAY
.
The clock is displayed for about 8
seconds.
seconds.
D-LIGHT SYNC OUT jack
(Except for European and
Australian models)
(Except for European and
Australian models)
Connect the D-LIGHT SYNC
controller (not supplied). You need
to connect the D-LIGHT SYNC
controller to the lighting device* (not
supplied). The lighting device will
react according to control signals
transmitted by the D-LIGHT SYNC
controller upon receiving music
source from the system. For details
on the use of D-LIGHT SYNC
controller and lighting device, refer to
the respective operating instructions
supplied with the respective device.
controller (not supplied). You need
to connect the D-LIGHT SYNC
controller to the lighting device* (not
supplied). The lighting device will
react according to control signals
transmitted by the D-LIGHT SYNC
controller upon receiving music
source from the system. For details
on the use of D-LIGHT SYNC
controller and lighting device, refer to
the respective operating instructions
supplied with the respective device.
* Refer to the D-LIGHT SYNC
controller operating instruction for the
recommended lighting device.
recommended lighting device.
Note
The lighting effect may be different
depending on the connected lighting
device or the type of music being played
back.
depending on the connected lighting
device or the type of music being played
back.
HCD-AZ33D
10
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-2. CASE
(Page
(Page
11)
3-3. S-MASTER
BOARD
(Page
11)
3-5. SWITCHING
REGULATOR
(Page
REGULATOR
(Page
12)
3-4. DC FAN (M701),
TUNER
TUNER
(FM/AM),
DMPORT
BOARD
(Page
12)
3-6. DVD MECHANISM DECK
(CDM86-DVBU101)
(Page
(CDM86-DVBU101)
(Page
13)
3-12. OPTICAL PICK-UP BLOCK
(KHM-313CAB)
(Page
(KHM-313CAB)
(Page
16)
3-13. MOTOR (PULLEY) ASSY
(LOADING)
(LOADING)
(M001)
(Page
17)
3-14. HOLDER (BU) ASSY
(Page
(Page
17)
3-7. MAIN BOARD BLOCK
(Page
(Page
14)
3-11. TAPE MECH DECK
(CRP42603)
(Page
(CRP42603)
(Page
16)
3-10. FRONT PANEL BLOCK
(Page
(Page
15)
3-8. MAIN
BOARD
(Page
14)
3-9. DMB17
BOARD
(Page
15)
3-15. LEVER (BU LOCK)
(Page
(Page
18)
3-16. CLOSE LEVER
(Page
(Page
18)
3-17. LEVER (DIR),
GEAR
GEAR
(IDL-B)
(Page
19)
3-18. CHASSIS (TOP)
(Page
(Page
19)
3-19. LEVER (LOADING-L/R)
(Page
(Page
20)
3-20. LEVER (DISC SENSOR)/
(DISC
(DISC
STOP)
(Page
21)
3-21. GEAR (IDL-C)
(Page
(Page
21)
SET
HCD-AZ33D
11
Note: Follow the disassembly procedure in the numerical order shown below.
3-2. CASE
case
seven screws
(BVTP3
(BVTP3
× 8)
four screws
(case 3 TP2)
four screws
(case 3 TP2)
two claws
3-3. S-MASTER BOARD
two screws
(BVTP3
(BVTP3
× 8)
two screws (BVTP3 × 10)
RT S-MASTER board
connector
(CN502)
(CN502)
RB radiation
sheet
sheet
connector
(CN503)
(CN503)
connector
(CN501)
(CN501)
flexible flat cable (13 core)
(CN500)
(CN500)
connector
(CN501)
(CN501)
screw
(BVTP3
(BVTP3
× 8)
two screws
(BVTP3
(BVTP3
× 8)
harness
HCD-AZ33D
12
3-4. DC FAN (M701), TUNER (FM/AM), DMPORT BOARD
3-5. SWITCHING REGULATOR
DC fan (M701)
tuner (FM/AM)
flexible flat cable (9 core)
(tuner/MAIN board: CN206)
flexible flat cable (9 core)
(DMPORT board: CN201/
MAIN board: CN209)
two screws
(BVTP3
(BVTP3
× 8)
three screws
(BVTP3
(BVTP3
× 8)
screw
(BVTP3
(BVTP3
× 8)
screw (BVTP3 × 8)
three screws
(BVTP3
(BVTP3
× 8)
screw (BVTP3 × 8)
(except AEP, AUS)
four screws (BVTP3 × 8)
RB two screws
(BVTP3
(BVTP3
× 8)
two screws
(BVTP3
(BVTP3
× 8)
two screws
(BVTT2.6
(BVTT2.6
× 8)
two screws (BVTP3 × 10)
RT two screws
(BVTP3
(BVTP3
× 8)
RG DMPORT board
connector
(CN203)
(CN203)
connector
(CN754)
(CN754)
RE bracket (DM port)
screw (BVTP3 × 8)
RH back panel (2DM)
shield (tuner)
three screws
(BVTP3
(BVTP3
× 8)
two screws
(BVTP3
(BVTP3
× 8)
screw
(BVTP3
(BVTP3
× 8)
switching regulator
connector
(CN1)
(CN1)
connector
(CN2)
(CN2)
connector
(CN3)
(CN3)
connector
(CN4)
(CN4)
harness
Click on the first or last page to see other DHC-AZ33D / HCD-AZ33D service manuals if exist.