DOWNLOAD Sony CMT-V50IP Service Manual ↓ Size: 7.84 MB | Pages: 89 in PDF or view online for FREE

Model
CMT-V50IP
Pages
89
Size
7.84 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
cmt-v50ip.pdf
Date
PREV: Sony NWZ-E373 / NWZ-E374 / NWZ-E375 Service Manual

Sony CMT-V50IP Service Manual ▷ View online

CMT-V50iP
21
2-24.  JACK  BOARD
2-23.  JACK  BOARD  BLOCK
6
 Remove the JACK board block 
 
in the direction of an arrow.
7
  JACK board block
4
 screw
 (BVTT3 
u 6)
5
 coating clip
4
 screw
 (BVTT3 
u 6)
1
 connector
 (CN252)
2
 connector
 (CN402)
3
 connector
 (CN901)
Insert is shallow
Insert is straight 
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
NG
OK
NG
Note: When you install the connector, please install them correctly.
 
There is a possibility that this machine damages when not
 
correctly installing it.
– Chassis (main) block – 
rear side view
5
 ferrite core
 (FC3)
ferrite core (FC3)
lead pin
6
 JACK board
JACK board
1
 two cushions (W)
2
 cushion (V)
4
 cushion (S)
4
 cushion (S)
‡:LUHVHWWLQJ
3
 Remove the ferrite core
from the lead pin.
CMT-V50iP
22
2-25.  MAIN  BOARD
Note 2: When installing the flexible flat cable, ensure the colored line.
 
No slanting after insertion.
colored line
colored line
Insert is straight to the interior.
Insert is incline
flexible flat 
cable
flexible flat 
cable
connector
connector
OK
NG
Insert is shallow
Insert is straight 
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
NG
OK
NG
Note 1: When you install the connector, please
 
install them correctly.
 
There is a possibility that this machine 
 
damages when not correctly installing it.
0
 flexible flat cable (19 core)
 (CN303)
qa
 flexible flat cable (7 core)
 (CN802)
flexible flat cable 
(19 core)
guide line
tape
guide line
MAIN board
2
 flexible flat cable (15 core)
 (CN103)
4
 flexible flat cable (9 core)
 (CN251)
6
 flexible flat cable (7 core)
 (CN101)
7
 flexible flat cable (24 core)
 (CN501)
5
 ferrite core
 (FC4)
8
 ferrite core
 (FC6)
3
 cushion (touch)
3
 cushion (touch)
9
 cushion (K)
qd
 cushion (K)
1
 connector
 (CN301)
qs
 connector
 (CN801)
(EXCEPT US, Canadian, 
Australian)
(US, Canadian, Taiwan)
OK
NG
The ferrite core is 
touching the screw. 
The ferrite core is not 
touching the screw. 
‡ Flexible flat cable (19 core) setting
qf
 four screws
 (BVTT3 
u 6)
qf
 screw
 (BVTT3 
u 6)
qg
 MAIN board
– Chassis (main) block – 
rear side view
CMT-V50iP
23
2-26.  CD  MECHANISM  DECK  BLOCK
1
 cushion (touch)
2
 connector
 (CN801)
3
  flexible flat cable (7 core) 
 (CN802)
4
 flexible flat cable (24 core) 
 (CN001)
5
 step screw
7
 CD mechanism deck block
mechanism deck
(BSXD1-DVBU201)
mechanism deck
(BSXD1-DVBU201)
mechanism deck
(BSXD1-DVBU201)
mechanism deck
(BSXD1-DVBU201)
mechanism deck
(BSXD1-DVBU201)
mechanism deck
(BSXD1-DVBU201)
insulator
5
 step screw
5
 step screw
5
 step screw
6
 insulator (black)
Note 2: When installing the flexible 
 
flat cable, ensure the colored 
 line.
 
No slanting after insertion.
Note 3: When installing the mechanism deck (BSXD1-DVBU201), 
 
check that four insulators are in the right position.
Note 4: When tightening the step screw, don not make the chassis 
 (main) 
distorted. 
Note 5: When you change new insulator, apply 
 
SANKOL (FTA-001HA) to insulator.
colored line
colored line
Insert is straight to the interior.
Insert is incline
flexible flat 
cable
flexible flat 
cable
connector
connector
OK
NG
Note 1: When you install the connector, please install them correctly.
 
There is a possibility that this machine damages when not 
 
correctly installing it.
Insert is shallow
Insert is straight 
to the interior.
connector
Insert is incline
connector
connector
connector
connector
connector
NG
OK
NG
NG
OK
insulator
insulator
insulator
insulator
insulator
– Chassis (main) block – 
rear side view
6
 insulator (black)
6
 insulator (blue)
6
 insulator (blue)
 Part No. 
Description
 J-2501-264-A  SANKOL (FTA-001HA)
CMT-V50iP
24
2-28.  FFC  GUIDE
2-27.  TUNER  1AM3RZ  ASSY (TU1),  PLATE (BALANCE)
1
 two tapes (T0.5-1)
tape (T0.5-1)
tape (T0.5-1)
3
 Remove the FFC guide 
 
in the direction of an arrow.
2
 three claws
2
 two claws
2
 claw
4
 FFC guide
FFC guide
– CD mechanism deck block bottom side view –
‡ 7aSe 7 Sasted Sosition
5
 cushion (K)
6
 cushion (M)
6
 cushion (M)
4
 flexible flat cable (9 core)
3
 Remove the tuner 1AM3RZ ASSY 
 
(TU1) in the direction of an arrow.
7
 tuner 1AM3RZ ASSY 
 (TU1)
colored line
colored line
Insert is straight to the interior.
Insert is incline
flexible flat 
cable
flexible flat 
cable
connector
connector
OK
NG
2
 two screws
 (BVTT3 
u 6)
8
 screw
 (BVTT3 
u 12)
8
 screw
 (BVTT3 
u 12)
9
 type 2 SW 3
– Chassis (main) block – 
rear side view
0
 five plates (balance)
 Note 
2: When installing the plate (balance),  
 
 
check number of plates (balance).
 
 
The side here is five plates (balance).
0
 six plates (balance)
 Note 
2: When installing the plate 
 
 
(balance), check number 
 
 
of plates (balance).
 
 
The side here is six plates 
  
(balance).
Note 1: When installing the flexible flat 
 
cable, ensure the colored line.
 
No slanting after insertion.
1
 cushion
 (touch)
Page of 89
Display

Click on the first or last page to see other CMT-V50IP service manuals if exist.

RANDOM: