DOWNLOAD Sony CMT-SE5 / CMT-SE9 / HCD-SE5 / HCD-SE9 Service Manual ↓ Size: 13.52 MB | Pages: 127 in PDF or view online for FREE

25

1

washer (3-1-0.4)

2

close lever spring

4

shaft disc stop

5

close lever 

3

claw

3

gear puley

2

claw

9

DIR lever 

5

gear (IDL-A)

q;

gear (IDL-B)

1

DIR spring

8

stopper

6

Loosen the screw. 

7

Hold the release lever

     and change the direction.

4

gear (cap)

26

6

claw

1

gear (IDL-F)

2

two claws

4

three hooks

5

gear loading lever

7

gear (IDL-C)

3

gear (IDL-D)

27

Incorrect operations may be performed if the test mode ia not en-
tered properly. In this case, press the  ?/1  button to turn the power
off, and retry to enter the test mode.

Procedure:
1.

Press the  ?/1  button to turn the power on.

2.

To enter the key test mode, press the 

[DISPLAY]

 button, the

[SOUND FIELD +]

 button and 

[DVD          ]

 stick simultaneously.

In the key check mode, the fluorecent indicator displays
“KEY00 VOL0”. Each time a button is pressed, “KEY00” value
increases. However, once a button is pressed, it is no longer
taken into account. When all keys are pressed correctly,
“KEY15 VOL0” is displayed. “VOL  “ value increases like 1,
2, 3 ... if rotating the 

[VOLUME]

 knob clockwise, or it decreases

like 0, 9, 8, ... if rotating counter-clockwise.

3.

To exit from this mode, press the 

[DISPLAY]

 button, the

[SOUND FIELD +]

 button and the 

[DVD          ]

 stick simultaneously.

Procedure:
1.

Press the  ?/1  button to turn the power on.

2.

To enter the version display mode, press the  

[SPEAKER OUT

MODE]

 button, the  

[SOUND FIELD -]

 button and the 

[TUNER

+]

  stick simultaneously. The model name and destination are

displayed.

3.

Each time the 

[DISPLAY]

 button is pressed, STR, DVD or the

model name/destination is displayed in order.

4.

To exit from this mode, press the  ?/1  button.

Procedure:
1.

Press the  ?/1  button to turn the power on.

2.

Press the 

[DISPLAY]

 button, the  

[SOUND FIELD +]

 button

and the 

[TUNER -]

 stick simultaneously.

3.

All segments are turned on.

4.

When the 

[DISPLAY]

 button is pressed, all segments are turned

off.

5.

When the 

[DISPLAY]

 button is pressed, the display will light

up as follows.

6.

When the 

[DISPLAY]

 button is pressed, the display will light

up as follows.

7.

When the 

[DISPLAY]

 button is pressed, all segments are turned

on again.

8.

To exit from this mode, press the  ?/1  button.

* The cold reset clears preset data without DVD to initial conditions.

Execute this mode when returning the set to the customer.

Procedure:
1.

Press the  ?/1  button to turn the power on.

2.

Press the  

[SPEAKER OUT MODE]

 button, the 

[SOUND FIELD +]

button and the 

[DVD   ]

 stick simultaneously.

3.

After this operation the preset data is reset. The fluorescent
indicator tube displays the messages “See you! “ and “COLD
RESET”, and the set is turned off.

Procedure:
1.

Press the 

[DVD SETUP]

 button on the remote commander.

2.

Select “RESET” with the  v    or   V    button on the remote
commander,  press the 

[ENTER]

 button.

3.

Select “YES” with the  v    or   V    button on the remote
commander,  press the 

[ENTER]

 button. It takes several seconds

to complete reset. Do not switch off the power during reset
operation.

Procedure:
1.

Press the  ?/1  button to turn the power on.

2.

Press the 

[DISPLAY]

 button, the 

[SOUND FIELD +]

 button

and the 

[TUNER +]

 stick simultaneously.

3.

To exit from this mode, press the  ?/1  button.

The disc slot lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure :
1.

Press the  ?/1  button to turn the set on.

2.

Press the 

[FUNCTION]

 button to set DVD function.

3.

Insert a disc.

4.

Press the 

[DVD     ]

 stick and the 

[     DVD]

 button simultaneously

for five seconds.

5.

The message “LOCKED” is displayed and the slot is locked.

Releasing Procedure :
1.

Press the 

[DVD     ]

 stick and the 

[     DVD]

 button simultaneously

for five seconds again.

2.

The message “UNLOCKED” is displayed and the slot is
unlocked.

When “LOCKED” is displayed, the slot lock is not released by
turning power on/off with the  ?/1  button.

SA-CD MP3

MONO

TUNED

CD

REC 2

SLEEP

PBC

CHAP

TRK

SHUF

REP

PL

AUTO

5.1CH

NTSC

DIGITAL

D

D

D

D

SA-CD MP3

MONO

TUNED

DVD

V CD AAC

MULTI

PLAY

REC123

SLEEP

PBC

TITLE

CHAP

TRK

ALBM

ALBM SHUF

REP

PL II

1

PGM

AUTO

PRESET

2.1CH

5.1CH

DDSG

ID3

ST

NTSC

DIGITAL

D

D

D

D

dts

DVD

V

AAC

MULTI

PLAY

1 3

TITLE

ALBM

ALBM

II

1

PGM

PRESET

2.1CH

DDSG

ID3

ST

dts

>

>

x

x

Z

x

Z

28

The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).

Use the following test disc on test mode.
TDV-520CSO (DVD-SL):

PART No. J-2501-236-A

LUV-P01 (CD):

PART No. 4-999-032-01

TDV-540C (DVD-DL):

PART No. J-2501-235-A

Do not use exiting test disc for DVD.

1.

Press the  

+/1

  button to turn the power on, and set the function

to DVD.

2.

While pressing the 

[DVD    ]

 stick and 

[    DVD]

 button, turn

the 

[VOLUME]

 knob clockwise to enter the test mode.

3.

It displays “SERVICE IN”  on the fluorescent indicator tube,
and displays the Test Mode Menu on the monitor screen as
follows. (At the bottom of the menu screen, the model name
and revision number are displayed)

Test Mode Menu

0. Syscon Diagnosis

1. Drive Auto Adjustment

2. Drive Manual Operation

3. Mecha Aging

4. Emergency History

5. Mecha Error History

6. Version Information

7. Video Level Adjustment

Exit: POWER Key

Model    :CMT-SE9CE or CMT-SE5CE

Revision :x.xx

4.

To execute each function, select the desired menu and press its
number on the remote commander. (RM-SD9)

5.

To release from test mode, press the  

+/1

  button and turn the

power off.

The same contents as board detail check by serial interface can be
checked from the remote commander operation.
On the Test Mode Menu screen, press 

[10/0]

  key on the remote

commander, and the following Check Menu will be displayed.

### Syscon Diagnosis ###

Check Menu

0. Quit

1. All

2. Version

3. EEPROM

4. GPIO

5. SD Bus

6. Video

Quit the Syscon Diagnosis and return to the Test Mode Menu.

This menu checks all diagnostic items continuously. Normally, all
items are checked successively one after another automatically
unless an error is found, but at a certain item that requires judgment
through a visual check to the result, the following screen is displayed
for the key entry.

• Example display

### Syscon Diagnosis ###

Diag All Check

No.2 Version

2-3. ROM Check Sum

Check Sum = 0420

Press NEXT Key to Continue

Press PREV Key to Repeat

For the ROM Check, the check sum calculated by the Syscon is
output, and therefore you must compare it with the specified value
for confirmation.
Following the message, press the 

[     ]

 button to go to the next

item, or press the 

[      ]

 button to repeat the same operation again.

To quit the diagnosis and return to Check Menu screen, press the

[RETURN     ]

 key on the remote commander to display Check

Menu.

Selecting 2 and subsequent items calls the submenu screen of each
item. And selecting 2 and subsequent items executes respective
menus and outputs the results.
For the contents of each submenu, see “Check Items List” as below.

0-2. Version

0-2-1. All
0-2-2. Revision
0-2-3. ROM Check Sum
0-2-4. Model Type
0-2-5. Region

0-3. EEPROM Check

0-3-1. Sampling Check
0-3-2. Detail Check

0-4. GP I/O Check
0-5. SD Bus Check
0-6. Video Check

0-2-2. Revision

The revision number of ROM (IC206) that the program for
the DVD system processor (IC207) is stored.

0-2-3. ROM Check Sum

The check sum of ROM (IC206) that the program for the
DVD system processor (IC207) is stored.
(4 digits hexadecimal number)

>

.

O

Z

x