Sony CMT-HPX7 / HCD-HPX7 Service Manual ▷ View online
37
HCD-HPX7
3-43. SPR-E (TAKO-BACK)
5
SPR-E (tako-back)
4
tension spring (lower)
1
four screws (2
×
5)
3
four
rubber rollers
2
four parasols
two claws
two claws
rubber roller
parasol
38
HCD-HPX7
3-44. PLATE (PUSH) ASSY
1
SPR-E (plate-push-back)
3
SPR-E (plate-push-back)
2
screw (PTPWH M2)
3
gear (tako second)
4
gear (tako second)
4
four claws
2
four claws
5
Remove the plate (push) assy
in the direction of the arrow.
1
Remove the plate (push) assy
in the direction of the arrow.
PRECAUTION DURING GEAR (TAKO SECOND) INSTALLATION
gear (tako second)
Adjust phases.
5
Adjust phases.
plate (push) assy
plate (push) assy
39
HCD-HPX7
3-45. SPR-P (LOCK)
3
lever (lock)
3
SPR-P (lock)
1
SPR-P (lock)
1
claw
2
lever (lock)
2
Hold the both ends of the SPSR-P
(lock) with two claws.
4
Pick up the SPR-P (lock) from
the claw and hook it on the lever.
PRECAUTION DURING LEVER INSTALLATION
40
HCD-HPX7
SECTION 4
ASSEMBLY
• This is can be assemble according to the following sequence.
4-1. ASSEMBLY FLOW
4-2. ASSEMBLING OF THE
STOCKER SECTION
(Page 41)
4-4. ASSEMBLING OF THE GEAR
(STOCK ROT LONG) (LEFT)
(Page 43)
4-5. CONFIRMING THE ASSEMBLING
OF THE STOCKER SECTION
(Page 44)
4-13. CONFIRMING THE ASSEMBLING
OF THE ARM SECTION
(Page 52)
4-6. ASSEMBLING OF THE GEAR
(STOCK ROTARY LEFT)
(Page 45)
4-7. ASSEMBLING OF THE GEAR
(STOCK ROTARY RIGHT)
(Page 46)
4-9. ASSEMBLING OF THE GEAR
(SUB GEAR PIN RIGHT)
(Page 48)
4-10. ASSEMBLING OF THE LEVER
(SUB GEAR BACK R)
(Page 49)
4-11. ASSEMBLING OF THE
SUB GEAR (IDLER)
(Page 50)
4-12. ASSEMBLING OF THE
SUB GEAR (2 STEP)
(Page 51)
4-3. ASSEMBLING OF THE GEAR
(STOCK ROT SHORT) (RIGHT)
(Page 42)
4-8. ASSEMBLING OF THE LEVER
(SUB GEAR BACK L)
(Page 47)
Click on the first or last page to see other CMT-HPX7 / HCD-HPX7 service manuals if exist.