Sony CMT-HPX7 / HCD-HPX7 Service Manual ▷ View online
41
HCD-HPX7
6
stocker (1) assy
2
stocker (1) assy
3
stocker (2) assy
7
stocker (2) assy
5
tow claws
4
tow dowels
8
stocker (3) assy
9
stocker (4) assy
0
stocker (5) assy
UPPER
SIDE
SIDE
1
Repeat the steps
4
to
6
, when installing the part
(2), (3), (4) and (5) of the stocker assy.
1
Check the number on each stocker assy,
before assembling all the assys.
4-2. ASSEMBLING OF THE STOCKER SECTION
42
HCD-HPX7
4-3. ASSEMBLING OF THE GEAR (STOCK ROT SHORT) (RIGHT)
FRONT
SIDE
SIDE
4
gear (stock rot short)
2
gear (stock rot short)
8
screw (1.7)
7
two screws (2
×
6)
6
stock box (R)
PRECAUTION DURING GEAR (STOCK ROT SHORT) INSTALLATION
gear (stock rot short)
gear (stock rot short)
5
Adjusting the two stockers
3
Adjusting the one stockers
UPPER
SIDE
SIDE
short
Note:
Install the stock box (R) right after
finishing the phase adjustment.
Install the stock box (R) right after
finishing the phase adjustment.
1
Align the edges of the stockers. Keep the position of
the stockers until finishing installation of the gear
(stock rot short) and the stock box (R).
(stock rot short) and the stock box (R).
43
HCD-HPX7
4-4. ASSEMBLING OF THE GEAR (STOCK ROT LONG) (LEFT)
4
gear (stock rot long)
2
gear (stock rot short)
6
two screws (2
×
6)
3
Adjusting the two stockers
5
Adjusting the one stockers
7
stocker box (L)
gear (stock rot long)
gear (stock rot short)
FRONT
SIDE
SIDE
PRECAUTION DURING GEAR
(STOCK ROT SHORT, STOCK ROT SHORT LONG) INSTALLATION
(STOCK ROT SHORT, STOCK ROT SHORT LONG) INSTALLATION
UPPER
SIDE
SIDE
long
short
Note.
Install the stock box (L) right after finishing
the phase adjustment.
Install the stock box (L) right after finishing
the phase adjustment.
1
Align the edges of the stockers. Keep the position of
the stockers until finishing installation of the gear
(stock rot short) and the stock box (L).
(stock rot short) and the stock box (L).
44
HCD-HPX7
4-5. CONFIRMING THE ASSEMBLING OF THE STOCKER SECTION
stocker section
3
Confirm that each claw contacts uniformly at the
respective stop positions of the stocker assy (1) to the stocker assy (5).
2
Confirm that each claw contacts uniformly at the
respective stop positions of the stocker assy (1) to the stocker assy (5).
4
Confirm the stocker assys move smooth
by sliding the stocker assys (1) to (5)
STOCKER ASSY (R) SIDE
STOCKER ASSY (L) SIDE
UPPER
SIDE
SIDE
FRONT
SIDE
SIDE
FRONT
SIDE
SIDE
UPPER
SIDE
SIDE
1
Slide the stocker assy in the
direction of the arrow.
Click on the first or last page to see other CMT-HPX7 / HCD-HPX7 service manuals if exist.